Hygroscopy

From Sciencemadness Wiki
Revision as of 13:48, 16 December 2017 by Mabus (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Hygroscopy refers to the tendency of a compound (such as sodium nitrate, or even more commonly, brown sugar) to absorb moisture from the air. If it absorbs enough water that it dissolves, it is called deliquescent. A list of hygroscopic compounds can be found in the categories section of this wiki.

Effects

Materials that are hygroscopic pose significant problems in most chemical processes.

This effect is undesirable in pyrotechnics, as hygroscopic materials burn much slowly, or may not burn at all. This is why potassium nitrate is used instead of sodium nitrate, as it's not hygroscopic, even though sodium nitrate has a slightly higher oxygen content per mass.

Hygroscopic salts, such as zinc chloride cannot be used in the synthesis of organometallic compounds if they are hydrated, as water will poison the synthesis. Such compounds must be kept anhydrous in air-tight containers or under dry inert gas away from air.

Powdered or grained hygroscopic compounds tend to harden inside the storage bottle as they absorb water from air, forming a solid block inside the bottle. This makes their extraction from the bottle difficult.

If a desiccant is used to dry a hygroscopic solvent and is left to sit for a long period of time, a lower dense saline layer will form on the bottom of the bottle. One example can be seen when using calcium chloride to dry acetonitrile and leaving it for months.

Some metal powders will oxidize in air much faster if wet.

References

Relevant Sciencemadness threads