Difference between revisions of "Acetonitrile"

From Sciencemadness Wiki
Jump to: navigation, search
(Created page with "'''Acetonitrile''', also known as '''cyanomethane''', '''ethanenitrile''' or '''methyl cyanide''' is a chemical compound with the formula CH<sub>3</sub>CN. ==Properties== ===...")
 
(Handling)
Line 28: Line 28:
 
==Handling==
 
==Handling==
 
===Safety===
 
===Safety===
Acetonitrile has modest toxicity in small doses, but it will be metabolised by the organism to produce [[hydrogen cyanide]], which is very toxic. This occurs several hours after the exposure. Acetonitrile can be absorbed through the skin and via inhalation, so proper protection, such as gloves and a mask should be worn.
+
Acetonitrile has modest toxicity in small doses, but it will be metabolised by the organism to produce [[hydrogen cyanide]], which is very toxic. This occurs several hours after the exposure. Acetonitrile can be absorbed through the skin and via inhalation, so proper protection, such as gloves and a mask should be worn. See [[cyanide]] for antidotes and methods of treatment.
  
 
Acetonitrile however, has a much lower toxicity than the other simple nitriles, with a LD<sub>50</sub> of 2460 mg/kg, while the next simple nitriles (propionitrile, butyronitrile, malononitrile, acrylonitrile) have values between 40-90 mg/kg.
 
Acetonitrile however, has a much lower toxicity than the other simple nitriles, with a LD<sub>50</sub> of 2460 mg/kg, while the next simple nitriles (propionitrile, butyronitrile, malononitrile, acrylonitrile) have values between 40-90 mg/kg.

Revision as of 10:19, 9 August 2015

Acetonitrile, also known as cyanomethane, ethanenitrile or methyl cyanide is a chemical compound with the formula CH3CN.

Properties

Chemical

Acetonitrile reacts with aldehydes to form hydroxynitriles.

R-CHO + CH3CN → R-CH(OH)-CH2(CN)[1]

Palladium chloride will form a complex with acetonitrile:

PdCl2 + 2 CH3CN → PdCl2[CH3CN]2

Physical

Acetonitrile is a colorless liquid, with a faint ether like smell and a sweet burnt smell. Acetonitile is hygroscopic, and will readily absorb water from air if kept in open air. It has a melting point between −46 to −44 °C and a boiling point between 81.3 to 82.1 °C.

Availability

Acetonitrile can be purchased from chemical suppliers. ScienceStuff sells 1 liter at $76.88 + UPS hazardous material surcharge of $28.50 per shipment.

Preparation

Acetonitrile can be made by dehydrating acetamide, which itself results from the thermal decomposition of ammonium acetate.

CH3COONH4 → CH3C(O)NH2 + H2O
CH3C(O)NH2 → CH3CN + H2O

Projects

Handling

Safety

Acetonitrile has modest toxicity in small doses, but it will be metabolised by the organism to produce hydrogen cyanide, which is very toxic. This occurs several hours after the exposure. Acetonitrile can be absorbed through the skin and via inhalation, so proper protection, such as gloves and a mask should be worn. See cyanide for antidotes and methods of treatment.

Acetonitrile however, has a much lower toxicity than the other simple nitriles, with a LD50 of 2460 mg/kg, while the next simple nitriles (propionitrile, butyronitrile, malononitrile, acrylonitrile) have values between 40-90 mg/kg.

Storage

Acetontrile is very hygroscopic and must be stored in closed bottles. Anhydrous calcium chloride pellets are usually added to keep the solvent dry.

Disposal

Acetonitrile can be neutralized by reacting it with sodium hydroxide, added in excess (for 1 mol MeCN, 2.5 mol NaOH should be added). The byproducts are acetic acid and ammonia.[2]

References

  1. http://onlinelibrary.wiley.com/doi/10.1002/anie.201302613/abstract
  2. http://link.springer.com/article/10.1007%2FBF02318626

Relevant Sciencemadness threads