| IUPAC name
| Other names
| AlI3 (anhydrous)|
AlI3·6 H2O (hexahydrate)
|Molar mass|| 407.695 g/mol (anhydrous)|
515.786 g/mol (hexahydrate)
|Appearance|| White solid (anhydrous)|
|Density|| 3.98 g/cm3 (anhydrous)|
2.63 g/cm3 (hexahydrate)
|Melting point|| anhydrous|
382 °C (720 °F; 655 K) (sublimes)
|Boiling point|| anhydrous|
188.28 °C (370.90 °F; 461.43 K)
185 °C (365 °F; 458 K) (decomposes)
|Solubility||Soluble in alcohols, carbon disulfide, carbon tetrachloride, diethyl ether, liq. NH3, THF|
|Solubility in phosphorus trichloride||17 g/100 ml (20 °C)|
|Solubility in pyridine||0.82 g/100 ml (25 °C)|
|Solubility in sulfur dioxide||0.23 g/100 ml (0 °C)|
Std enthalpy of
|Safety data sheet||Sigma-Aldrich (anhydrous)|
| Aluminium chloride|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Aluminium iodide is a chemical compound containing aluminium and iodine, with the formula AlI3. It can also be encountered as hexahydrate (AlI3·6H2O).
Anhydrous AlI3 is a strong Lewis acid and will absorb water from the atmosphere to form hexahydrate.
It is employed as a reagent for the scission of certain kinds of C-O and N-O bonds. It cleaves aryl ethers and deoxygenates epoxides.
Aluminium iodide is a colorless solid, soluble in water.
Aluminium iodide can be bought from chemical suppliers. The anhydrous form is more expensive than the hydrated form.
Aluminium iodide can be prepared in a spectacular process from their elements. To a small amount of evenly mixed powdered aluminium metal and elemental iodine, a few drops of water are added. After a few seconds, a vigorous reaction occurs followed by emission of intense purple colored vapors of iodine, due to heat generated by the reaction.
- 2 Al(s) + 3 I2(s) → 2 AlI3(s)
While good for chemical demonstrations, this route is not very practical for the preparation of bulk AlI3, as most of the final product becomes scattered in air and will rapidly absorb moisture, causing partial hydrolysis.
A much safer method involves passing iodine vapors over large size Al metal granules heated at 500-600 °C, in an inert gas atmosphere. A more convenient route involves refluxing Al granules and iodine in an inert solvent, such as carbon tetrachloride The resulting impure AlI3 is collected and further purified by subliming it under vacuum.
The hexahydrate form can be obtained by reacting Al with iodine in water, or by neutralizing aluminium hydroxide with hydroiodic acid. The excess water is removed and the resulting aluminium iodide is dried in a desiccator.
- Catalyst in organic reactions
- Compound collecting
- Prepare elemental iodine
Aluminium iodide is irritant to skin, eyes and respiratory system. Aluminium compounds are known neurotoxins.
Anhydrous AlI3 should be kept in airtight vessels. Schlenk flasks are a good storage medium.
The hexahydrate form doesn't require special storage, any clean glass bottle will do.
Can be neutralized to aluminium oxide, while the iodine should be recycled.
- Справочник по растворимости. - Т.1, Кн.1. - М.-Л.: ИАН СССР (Solubility Handbook. - Vol. 1, Book 1. - M.-L .: IAN USSR, 1961), 1961
- Seidell A. Solubilities of inorganic and metal organic compounds. - 3ed., vol.1. - New York: D. Van Nostrand Company, 1940
- Zeitschrift fur Physikalische Chemie. - 1937. - Vol. 179A, No. 1 pp. 47
- Inorganic laboratory preparations 15, 1962