Difference between revisions of "Ammonium formate"

From Sciencemadness Wiki
Jump to: navigation, search
(Projects)
(Preparation)
Line 128: Line 128:
  
 
==Preparation==
 
==Preparation==
Ammonium formate can be made by bubbling ammonia through [[formic acid]], though this requires lots of ammonia. An ammonium salt, such as [[ammonium bicarbonate]] can be used instead. Cooling the solution will cause the salt to precipitate. Filter the resulting precipitate and dry it in a desiccator. Heating is not recommended as it will cause it to decompose.
+
Ammonium formate can be made by bubbling ammonia through [[formic acid]], though this requires lots of ammonia. An ammonium salt, such as [[ammonium bicarbonate]] can be used instead. Cooling the solution will cause the salt to precipitate. Excess water can be evaporated by carefully heating the solution, at below 115 °C, to prevent it from melting/decomposing. Filter the resulting precipitate and leave it to dry, either in open air or in a desiccator. Heating is not recommended as it will cause it to decompose.<ref>https://www.youtube.com/watch?v=CuiLFCaYseo</ref>
  
 
==Projects==
 
==Projects==

Revision as of 11:58, 22 May 2016

Ammonium formate
Names
IUPAC name
Ammonium formate
Other names
Azanium formate
Identifiers
Jmol-3D images Image
Properties
CH5NO2
Molar mass 63.06 g/mol
Appearance White hygroscopic solid
Odor Slightly ammoniac
Density 1.26 g/cm3
Melting point 116 °C (241 °F; 389 K)
Boiling point 180 °C (356 °F; 453 K) (decomposes)
102 g / 100 ml (0 °C)
142.7 g / 100 ml (20 °C)
202.4 g / 100 ml (40 °C)
516 g / 100 ml (80 °C)
Solubility Soluble in liquid ammonia, diethyl ether, ethanol, methanol
Insoluble in benzene
Thermochemistry
−556.18 kJ/mol
Hazards
Safety data sheet ScienceLab
Lethal dose or concentration (LD, LC):
410 mg/kg (mice, intravenous)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Ammonium formate is an organic chemical compound, an ammonium salt of formic acid. It is a colorless, hygroscopic solid, with the chemical formula NH4HCOO.

Properties

Chemical

Heating ammonium formate will cause it to convert it into formamide:

NH4HCO2 → HCONH2 + H2O

Further heating the formamide will cause it to decompose into carbon monoxide and ammonia, while at higher temperatures and in the presence of an acid catalyst will yield hydrogen cyanide:

HC(O)NH2 → CO + NH3
HC(O)NH2 → HCN + H2O

Physical

Ammonium formate is a hygroscopic white crystalline solid, soluble in water.

Availability

Ammonium formate is sold by big chemical suppliers, while smaller suppliers rarely have it in their stock.

Preparation

Ammonium formate can be made by bubbling ammonia through formic acid, though this requires lots of ammonia. An ammonium salt, such as ammonium bicarbonate can be used instead. Cooling the solution will cause the salt to precipitate. Excess water can be evaporated by carefully heating the solution, at below 115 °C, to prevent it from melting/decomposing. Filter the resulting precipitate and leave it to dry, either in open air or in a desiccator. Heating is not recommended as it will cause it to decompose.[1]

Projects

Handling

Safety

Ammonium formate may release formic acid vapors and protection should be worn when handling the compound.

Storage

In closed bottles, away from moisture. Ammonia may be added to limit hydrolysis.

Disposal

Mixing it with an alkali will neutralize it.

References

  1. https://www.youtube.com/watch?v=CuiLFCaYseo

Relevant Sciencemadness threads