Difference between revisions of "Extraction thimble"

From Sciencemadness Wiki
Jump to: navigation, search
(Created page with "{{Stub}} An '''extraction thimble''' is a test-tube like laboratory item, made of cellulose, used in Soxhlet extractors to hold the material being subjected to solvent...")
 
Line 5: Line 5:
 
Extraction thimbles are often made of pure cellulose, like high-quality alpha cellulose cotton linter. Their wall thickness is between 1-2 mm. Extraction thimbles have the form of a short and thick test tube, and most models do not have lid. Cellulose extraction thimbles can handle temperatures up to 120 °C.
 
Extraction thimbles are often made of pure cellulose, like high-quality alpha cellulose cotton linter. Their wall thickness is between 1-2 mm. Extraction thimbles have the form of a short and thick test tube, and most models do not have lid. Cellulose extraction thimbles can handle temperatures up to 120 °C.
  
Extraction thimbles can also be made from glass micro fibers without binder, when a more corrosive solvent is needed. These models have short-term temperature resistance up to 500 °C (borosilicate glass fiber) or 800 °C (quartz fiber), depending on the manufacturer.
+
Extraction thimbles can also be made from glass micro fibers without binder, when a more corrosive solvent is needed. These models have short-term temperature resistance up to 500 °C (borosilicate glass fiber) or 800 °C (quartz fiber), depending on the manufacturer. They are also more expensive and harder to find.
  
 
==Availability==
 
==Availability==

Revision as of 19:48, 4 October 2018

An extraction thimble is a test-tube like laboratory item, made of cellulose, used in Soxhlet extractors to hold the material being subjected to solvent extraction.

General

Extraction thimbles are often made of pure cellulose, like high-quality alpha cellulose cotton linter. Their wall thickness is between 1-2 mm. Extraction thimbles have the form of a short and thick test tube, and most models do not have lid. Cellulose extraction thimbles can handle temperatures up to 120 °C.

Extraction thimbles can also be made from glass micro fibers without binder, when a more corrosive solvent is needed. These models have short-term temperature resistance up to 500 °C (borosilicate glass fiber) or 800 °C (quartz fiber), depending on the manufacturer. They are also more expensive and harder to find.

Availability

Extraction thimbles can be bought from lab suppliers and online.

DIY extraction thimble

A very simple extraction thimble can be made by wrapping the target material in filter paper. You can also use clean cotton, but made sure to compact it well, to prevent loose fibers from floating away and clogging the siphoning tube or ending up in the distillation flask.

References

Relevant Sciencemadness threads