Difference between revisions of "Gas washing bottle"

From Sciencemadness Wiki
Jump to: navigation, search
(Created page with "{{Stub}} A '''gas washing bottle''' is a lab device whose primary use is to inject a stream of gas through a liquid, in a closed flask. ==Description== A gas washing bottle c...")
 
 
(3 intermediate revisions by the same user not shown)
Line 3: Line 3:
  
 
==Description==
 
==Description==
A gas washing bottle consists of a (usually) cylindrical bottle/flask with a female ground glass joint, where a specialized male ground glass joint stopper with two glass tubes can be attached. The stopper has two external glass tubes, one enters the stopper from one side, taking a 90° angle and extends until near the bottom of the flask, while the other is connected directly to the stopper.  
+
A gas washing bottle consists of a (usually) cylindrical bottle/flask with a female ground glass joint, where a specialized male ground glass joint stopper with two glass tubes can be attached. The stopper has two external glass tubes, one enters the stopper from one side, taking a 90° angle and extends until near the bottom of the flask, while the other is connected directly to the stopper. Some special types of gas washing bottles have a fritted glass.
 +
 
 +
'''Dreschel washing bottles''' are the most common model.
  
 
==How to use a gas washing bottle==
 
==How to use a gas washing bottle==
Line 15: Line 17:
 
==Availability==
 
==Availability==
 
Can be bought from lab suppliers and online.
 
Can be bought from lab suppliers and online.
 +
 +
==DIY gas washing bottle==
 +
A simple gas washing bottle can be made by inserting two tubes through a silicone rubber stopper or some other type of stopper, with the entry tube longer than the exit tube and place the said stopper in a flask or tube opening.
  
 
==Uses==
 
==Uses==
Line 20: Line 25:
  
 
Gas washing bottles can also be filled with a drying agent like [[calcium chloride]] and used as a [[drying tube]].
 
Gas washing bottles can also be filled with a drying agent like [[calcium chloride]] and used as a [[drying tube]].
 +
 +
==See also==
 +
*[[Cold trap]]
  
 
==References==
 
==References==

Latest revision as of 21:59, 8 April 2018

A gas washing bottle is a lab device whose primary use is to inject a stream of gas through a liquid, in a closed flask.

Description

A gas washing bottle consists of a (usually) cylindrical bottle/flask with a female ground glass joint, where a specialized male ground glass joint stopper with two glass tubes can be attached. The stopper has two external glass tubes, one enters the stopper from one side, taking a 90° angle and extends until near the bottom of the flask, while the other is connected directly to the stopper. Some special types of gas washing bottles have a fritted glass.

Dreschel washing bottles are the most common model.

How to use a gas washing bottle

To properly use a gas washing bottle, you must do the following:

  • Place the gas washing bottle in a secure place
  • Fill the bottle with the choice liquid
  • Grease the joints
  • Connect the tubing to the 2 external glass tubes from the bottle, with the gas entry tube to the long tube, and the gas exit to the shorter tube.
  • Begin pumping gas through the bottle

Availability

Can be bought from lab suppliers and online.

DIY gas washing bottle

A simple gas washing bottle can be made by inserting two tubes through a silicone rubber stopper or some other type of stopper, with the entry tube longer than the exit tube and place the said stopper in a flask or tube opening.

Uses

Gas washing bottles are commonly used to remove gaseous side-product from reactions or to dissolve various gasses in liquids, to make a solution.

Gas washing bottles can also be filled with a drying agent like calcium chloride and used as a drying tube.

See also

References

Relevant Sciencemadness threads