Hydrazine sulfate

From Sciencemadness Wiki
Revision as of 10:33, 4 August 2015 by Ave369 (Talk | contribs)

Jump to: navigation, search

Hydrazine sulfate is a useful salt that finds its use as a non-volatile source of hydrazine.

Properties

Chemical

Hydrazine hydrate and anhydrous hydrazine are highly carcinogenic, toxic and air unstable compounds however as the sulfate salt, the hydrazine is much more stable and can be handled without much of the safety concerns as pure hydrazine. Hydrazine hydrate is produced when hydrazine sulfate is reacted with a strong base such as sodium hydroxide.

Hydrazine sulfate has the molecular formula N2H6SO4, however this is better represented as N2H5HSO4.  It finds uses in organic chemistry, mainly by forming hydrazides.

Physical

Hydrazine sulfate is a white crystalline solid melting at 254°C.

Availability

Hydrazine sulfate is not very readily available for purchase to the amateur, but it is cheaply made at home.

Preparation

There are many ways in which an amateur can produce hydrazine sulfate.  Two important ones which give decent, around 50%, yields are shown below.

Hypochlorite-Ketazine Process

Concentrated(20 - 30%) ammonia is mixed with methyl ethyl ketone and a few hundred mg of gelatin and cooled down to 0°C. Sodium hypochlorite is then added dropwise until the stoichiometric amount has been added.  A hydrophobic azine (methyl ethyl ketazine) which is less dense than water, will then separate.  This azine is then mixed with a stoichiometric amount of ~17% sulfuric acid, and heated to the boiling point of MEK to ensure full hydrolysis of the azine.  Finally, the solution is chilled to 0°C to precipitate the hydrazine sulfate.  The solution is then vacuum filtered.[1]

Hoffman Rearrangement of Urea

A solution of 10% sodium hypochlorite is added to solid sodium hydroxide and the mixture is kept cold during the addition.  Meanwhile, a solution of urea with a few hundred mg of gelatin is prepared.  The two solutions are mixed and allowed to fully react, a voluminous foam will appear.  After they have reacted, MEK is added to the solution and the azine is processed as previoulsy described.[2]

Projects

When mixed with a solution of silver nitrate, a silver mirror will be formed on the surface of the container.  Hydrazine sulfate also finds a variety of uses in organic syntheses such as the preparation of 2,4 dinitrophenylhydrazine, and the preparation of luminol.

Free based hydrazine can be used in the production of sodium azide.

Safety

Hydrazine sulfate is much safer than its free base, hydrazine.  However, it is still moderately toxic and a suspected carcinogen. It may ignite on contact with certain strong oxidizers.

References

  1. https://www.youtube.com/watch?v=UB7vwIFCnR0
  2. https://www.youtube.com/watch?v=JCrDttuw5co

Relevant Sciencemadness threads