Difference between revisions of "Melting point capillary tube"

From Sciencemadness Wiki
Jump to: navigation, search
(Created page with "{{Stub}} A '''melting point capillary tube''', also called '''melting point determination tubes''' or just '''capillary tube''', is a very thin tube of glass used to determine...")
 
Line 5: Line 5:
 
Melting point capillary tubes are thin and short (70-100 mm × 0.8 mm × 1 mm) borosilicate glass tubes, open at both ends.
 
Melting point capillary tubes are thin and short (70-100 mm × 0.8 mm × 1 mm) borosilicate glass tubes, open at both ends.
  
To use them for determining the melting point of solids, you must first seal it at one end, which can be done by heating one end with a flame.
+
To use them for determining the melting point of solids, you must first seal it at one end, which can be done by heating one end with a flame. Any flame can be used, even a simple disposable lighter is enough to seal one end of the tube.
  
 
==Availability==
 
==Availability==

Revision as of 14:24, 3 July 2018

A melting point capillary tube, also called melting point determination tubes or just capillary tube, is a very thin tube of glass used to determine the melting point of solids.

General

Melting point capillary tubes are thin and short (70-100 mm × 0.8 mm × 1 mm) borosilicate glass tubes, open at both ends.

To use them for determining the melting point of solids, you must first seal it at one end, which can be done by heating one end with a flame. Any flame can be used, even a simple disposable lighter is enough to seal one end of the tube.

Availability

Melting point capillaries can be bought from lab suppliers and they're quite cheap.

DIY capillary tube

You can make a simple capillary tube by heating a glass rod in a gas torch and then stretching the softened glass until you reach the desired length and thinness. Scratch the capillary using an ampoule cutter and then snap it to cut it whole.

See also

References

Relevant Sciencemadness threads