|This article is a stub. Please help Sciencemadness Wiki by expanding it, adding pictures, and improving existing text.
Liquid methane, being poured in a dish, while causing lots of moisture condensation
| IUPAC name
| Other names
|Molar mass||16.04 g/mol|
|Density|| 0.656 g/L (gas, 25 °C, 1 atm)|
0.716 g/L (gas, 0 °C, 1 atm)
(liquid, −162 °C)
|Melting point||−182.5 °C (−296.5 °F; 90.6 K)|
|Boiling point||−161.49 °C (−258.68 °F; 111.66 K)|
|Solubility||Soluble in acetone, benzene, diethyl ether, ethanol, methanol, toluene, xylene|
|Solubility in diethyl ether||65 ml/100 ml (20 °C)|
|Solubility in ethanol||36 ml/100 ml (20 °C)|
|Vapor pressure||4.66·105 mmHg at 25 °C|
Std enthalpy of
|Safety data sheet||Sigma-Aldrich|
|Flash point||−188 °C (−306.4 °F; 85.1 K)|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Methane is a chemical compound with the chemical formula CH4. It is the simplest alkane and organic compound, as well as the main component of natural gas.
Methane is also partly responsible for climate change, as it is a very potent greenhouse gas.
Methane will burn in air to produce carbon dioxide and water vapor.
- CH4 + 2 O2 → CO2 + 2 H2O
Minute amounts of formaldehyde is also produced as side product.
Methane is very slightly basic.
Methane is a gas at standard conditions, lighter than air. It is colorless, odorless (the smell of flatulence comes from impurities in the source that give a warning of a leak), insoluble in water, but soluble in organic solvents. Methane has a melting point of -182.5 °C and a boiling point of −161 °C.
Methane is sold in compressed gas cylinders, mixed with small amounts of tert-butylthiol, which gives it the characteristic "gas" smell. The thiol can be removed by bubbling the gas through a scrubber. This experiment should only be performed in a well ventilated area, as pure methane is odorless and in case of a leak it may become an explosive hazard.
Natural gas can also serve as methane substitute in reactions that do not require high reagent grades. Important: most household gas cylinders are not natural gas but rather propane, butane or a mix of both.
- CH3COONa + NaOH → CH4 + Na2CO3
Ethane appears as side product.
- Al4C3 + 12 H2O → 3 CH4 + 4 Al(OH)3
This reaction works better at high temperatures and low oxygen atmosphere.
The best way to make methane is from the decomposition of organic matter, in a reactor called digester, which can be anything from a plastic barrel to corrosion resistant metal tanks. Inside the tank, organic matter or manure (herbivores only!) is mixed with water and let to decompose over a period of weeks to months. The resulting gas, called "biogas", is transfered in another container, usually filled with water, from where it's purified. Raw biogas generally contains 50-75% methane, 25-50% carbon dioxide, nitrogen (<10%), with the rest being hydrogen sulfide (~3%), water vapor (1%), hydrogen (~1%), oxygen (0.5%) and sometimes traces of siloxanes, phosphine or amines such as ammonia. The impurities are removed by scrubbing the biogas in either an alkaline solution or in special adsorbtion towers. The purified methane is dried and, since this process takes a long time, can be compressed in gas tanks. NEVER store compressed methane in oxygen cylinders!
Methane is not toxic, but it's extremely flammable and can form explosive mixtures with air, at concentrations between 4.4-17%. Methane is also an asphyxiant and may displace oxygen in an enclosed space. However, because it's lighter than air, it doesn't tend to accumulate.
Methane gas cylinders should be stored in cold places and away from any strong oxidizing or corrosive source. Valves should always be checked for leaks.
Methane is a potent gas involved in global warming, so it's recommended to burn it when possible, instead of letting it rise in the atmosphere.