Difference between revisions of "Nitrocellulose"

Revision as of 13:17, 6 September 2015

This article is a stub. Please help Sciencemadness Wiki by expanding it, adding pictures, and improving existing text.

A section of nitrocellulose, which is a polymer that forms long chains.

Nitrocellulose, also known as cellulose nitrate, guncotton and NC, is the nitrate ester of cellulose. It has the property of burning very rapidly, almost in a flash, leaving little to no ashes behind. Nitrocellulose can be nitrated to various degrees. As it consists of long chains of nitrated glucose units, its nitrogen content rather than a number of nitro groups per molecule is usually used to describe quality. The theoretical maximum is 14.15% N, which corresponds to three nitro groups per glucose unit.

Properties

Chemical

Nitrocellulose will burn when ignited.

Physical

Nitrocellulose is a white or yellowish solid compound, soluble in many organic solvents, such as ethanol, isopropanol, ether.

Availability

Nitrocellulose can be found in ping pong balls, as its dinitrate form mixed with camphor, in a 75:25 ratio. It can be extracted with acetone, though this process is complex and requires lots of ping pong balls.

The first celluloid films, aka "nitrate films" are also made of nitrocellulose, but are no longer manufactured and unless they're very degraded it's a waste to destroy them, as they're valuable on their own.

Preparation

The nitrating mixture (step 2). 50g of KNO₃ dissolved in 80 mL of H₂SO₄

Nitrocellulose is produced via the nitration of a source of cellulose, such as cotton. A synthesis of this procedure can be found here.

Burning test of the resulted NC can be seen in the video gallery below.

Uses

Nitrocellulose with a high nitrogen content (above 13% N) is a moderately powerful explosive. It is rarely used as an explosive in its pure form however. It is more common as a gelling agent for nitroglycerin and ethylene glycol dinitrate in the production of blasting gelatin.

Nitrocellulose is also used in pyrotechnics and by magicians as a special effect. Small samples of good quality nitrocellulose can be burned in one's bare hands without causing burns, thanks to its high burn rate and absence of solid residue.

Projects

• Flash paper
• Smokeless powder

Handling

Safety

Dry nitrocellulose is a powerful low explosive and is very easily ignited. While pure, clean nitrocellulose is mostly stable and can be safely handled, nitrocellulose that contains remaining traces of acid is very unstable and may spontaneously combust in air. It should be handled and treated with great care as with other explosives. While not as immediately dangerous as pieces of guncotton, solutions of nitrocellulose in a solvent and dry lacquers are very flammable, and should be kept away from all open flames and heat sources.

At 13ºC, the vapor from the nitrocellulose together with the oxygen in the air will catch fire if a heat source is applied to it. When the temperature is increased to 160-170ºC and above, it will spontaneously ignite without an external spark or flame.^[1]

Storage

Nitrocellulose and nitrocellulose solutions should be stored away from any ignition source, preferably in a separate fire-proof cabinet. NC fires are notoriously hard to extinguish and can even continue to burn after being submerged underwater, as they don't require atmospheric oxygen to continue burning.

Nitrocellulose will slowly decompose over time, unless stored in cold dark places. Old film nitrates degradation is a well known phenomenon.

Disposal

Nitrocellulose can neutralized by heating it.

Gallery

Videos

References

• Chemistry and Technology of Explosives - Volume II, first edition, 1965

1. ↑ http://safety.com.sg/pds/files/pdf/Safe%20Use%20&%20Handling%20&%20Storage%20of%20Nitrocellulose.pdf

Relevant Sciencemadness threads