Difference between revisions of "Phthalic anhydride"

From Sciencemadness Wiki
Jump to: navigation, search
(Relevant Sciencemadness threads)
Line 7: Line 7:
 
| OtherNames = 1,3-Dioxophthalan<br>1,3-Isobenzofurandione<br>1,3-Phthalandione<br>Isobenzofuran-1,3-dione<br>Phthalic anhydride
 
| OtherNames = 1,3-Dioxophthalan<br>1,3-Isobenzofurandione<br>1,3-Phthalandione<br>Isobenzofuran-1,3-dione<br>Phthalic anhydride
 
<!-- Images -->
 
<!-- Images -->
| ImageFile =  
+
| ImageFile = Phthalic anhydride purified by anewsoul.jpg
| ImageSize =  
+
| ImageSize = 280
 
| ImageAlt =  
 
| ImageAlt =  
 
| ImageName =  
 
| ImageName =  
 +
| ImageCaption = Fluffy phthalic anhydride
 
| ImageFile1 =  
 
| ImageFile1 =  
 
| ImageSize1 =  
 
| ImageSize1 =  

Revision as of 19:25, 23 June 2018

Phthalic anhydride
Phthalic anhydride purified by anewsoul.jpg
Fluffy phthalic anhydride
Names
IUPAC name
2-Benzofuran-1,3-dione
Other names
1,3-Dioxophthalan
1,3-Isobenzofurandione
1,3-Phthalandione
Isobenzofuran-1,3-dione
Phthalic anhydride
Properties
C8H4O3
Molar mass 148.1 g/mol
Appearance White solid
Odor Acrid
Density 1.53 g/cm3 (20 °C)
1.2 g/cm3 (135 °C)
Melting point 131.6 °C (268.9 °F; 404.8 K)
Boiling point 295 °C (563 °F; 568 K)
0.62 g/100 g (20 °C)
19.0 g/100 g (100 °C)
Slow hydrolysis
Solubility Dissolves and slowly reacts with alcohols
Slightly soluble in carbon disulfide
Vapor pressure 0.0015 mmHg (20 °C)
Thermochemistry
Hazards
Safety data sheet Sigma-Aldrich
Flash point 152 °C
Lethal dose or concentration (LD, LC):
4020 mg/kg (oral, rat)
1520 mg/kg (oral, mouse)
800 mg/kg (oral, cat)
800-1600 mg/kg (oral, rat)
2210 mg/kg (oral, mouse)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Phthalic anhydride is an organic compound, the anhydride of phthalic acid. It is an important industrial chemical used in the production of plasticizers.

Properties

Chemical

Phthalic anhydride hydrolyzes in water to phthalic acid.

Physical

Phthalic anhydride is a white solid, which slowly reacts with water.

Availability

Phthalic anhydride is sold by various chemical suppliers and it's quite cheap. It can also be purchased online.

Preparation

Phthalic anhydride can be prepared from diethylhexyl phthalate, which can be easily found in vinyl gloves, available in most pharmacies and medical supply stores. Look on the box label for gloves that are made with PVC. Grind about 50 g of gloves to flakes in a beaker. Add isopropanol and reflux the mixture for an hour to extract the diethylhexyl phthalate. Filter the resulting alcoholic solution and then boil off half of its volume. A solution of 10 g of sodium hydroxide is then added to the alcoholic solution of diethylhexyl phthalate and reflux the mixture for another hour, to hydrolyze it to disodium phthalate. Turn off the heating and let it cool. The reaction mixture will separate into two layers, the upper layer is the alcoholic layer, while the bottom is the aqueous layer, containing the disodium phthlate. Remove the alcohol layer and collect the disodium phthlate aqueous solution. To the aqueous solution, add 25 ml of fuming hydrochloric acid (12 M) to convert it to phthalic acid. Cool the solution to precipitate the phthalic acid and decant off the water. Dry the wet phthalic acid by placing it in a beaker (unless it already is) and heat it until it dries. Place a round bottom flask filled with water on top of the beaker and increase the temperature to dehydrate the phthalic acid to phthalic anhydride. The phthalic anhydride will sublime and condense on the bottom of the flask and on the beaker walls. The crystals appear as cotton candy. When a sufficient amount of the anhydride has deposited, take the beaker off the hotplate, let it cool and collect the crystals. Do not wait too much, as the anhydride crystals will get too heavy and will fall back in the phthallic acid melt. Repeat until no more phthallic anhydride condenses.[1]

Another route involves the oxidation of naphthalene with nitric acid or vanadium pentoxide. Mercury(II) sulfate and sulfuric acid can also be used.

Projects

  • Make luminol
  • Make dyes
  • Make dimethyl phthalate
  • Make phthalimide
  • Make cellulose acetate phthalate

Handling

Safety

Phthalic anhydride is corrosive and should be handled with care.

Storage

Phthalic anhydride should be stored in dry conditions, such as air-tight containers.

Disposal

Can be neutralized with an aqueous alkaline solution to disodium phthalate.

Complete destruction can be achieved with a strong oxidizing solution, such as chromic acid, Fenton's reagent, piranha solution.

References

  1. https://www.youtube.com/watch?v=58Ve69s0qD0

Relevant Sciencemadness threads