Potassium chloride

From Sciencemadness Wiki
Revision as of 19:34, 12 June 2018 by Mabus (Talk | contribs)

Jump to: navigation, search
Potassium chloride
Potassium chloride.jpg
IUPAC name
Potassium chloride
Other names
Muriate of potash
Molar mass 74.5513 g/mol
Appearance White solid
Odor Odorless
Density 1.984 g/cm3
Melting point 770 °C (1,420 °F; 1,040 K)
Boiling point 1,420 °C (2,590 °F; 1,690 K)
35.5 g/100 ml (20 °C)
Solubility Soluble in alkali, glycerol
Slightly soluble in alcohol
Insoluble in diethyl ether
Vapor pressure ~0
Acidity (pKa) ~7
83 J·mol−1·K−1
−436 kJ/mol
Safety data sheet Sigma-Aldrich
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
2,600 mg/kg (rat, oral)
Related compounds
Related compounds
Lithium chloride
Sodium chloride
Rubidium chloride
Caesium chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Potassium chloride is a salt with the formula KCl. It is a white crystalline solid. It is edible, commonly used as a salt substitute, but it has a sharp, biting aftertaste (which is often described as metallic) that many people find unpleasant.

It can be found in nature as the mineral sylvite or sylvine. It is also found in the mineral sylvinite, where it can be found with sodium chloride (halite).



Potassium chloride is a white crystalline solid with a cubic structure. It has a molar mass of 74.55. Its solubility in water is 28 g/100mL at 0 ˚C and 56.7 g/mL at 100 ˚C[1]

Solubility chart


Potassium chloride can be used as a source of chloride ions in reactions, although sodium chloride is more common. KCl is often used to make KClO3 (potassium chlorate) using electrolysis. The high solubility of KCl at low temperature compared to KClO3 makes it easy to separate the two compounds from a solution.

Potassium chloride salt substitute


Potassium chloride can be easily obtained in relatively pure form at the grocery store as a salt substitute for people with low-sodium diets. This source is mixed in with potassium bitartrate to improve taste. However, salt substitute is deliberately overpriced by the companies that make it; it is many times cheaper to obtain potassium chloride through other means, often through larger industrial quantities, which are usually purer anyway. This includes buying potassium chloride as fertilizer, sometimes referred to as muriate of potash. In some hardware stores, sodium-free water purification tablets made of 99% or higher potassium chloride can be purchased, usually in bags weighing about 40 lbs. These are by far the most economic method of purchasing potassium chloride.


Potassium chloride can be prepared from potassium hydroxide and hydrochloric acid, but this method is uneconomical in the lab due to the fact that KCl is usually easier to get than potassium hydroxide. Potassium carbonate or potassium bicarbonate can also be added to hydrochloric acid, but this requires care to control carbon dioxide outgassing.

Potassium chloride can also be obtained from saline water (seawater), through fractional recrystallization, though you will need a very large amount of seawater to obtain any useful amount of KCl.




No safety measures are needed with potassium chloride. It is non-toxic unless directly consumed in very large quantities.


Potassium chloride should be stored in closed bottles. No special storage is required.


Potassium chloride can be safely poured down the drain.


  1. CRC Handbook of Chemistry and Physics 66th edition

Relevant Sciencemadness threads