Difference between revisions of "Schweizer's reagent"

From Sciencemadness Wiki
Jump to: navigation, search
Line 153: Line 153:
[[Category:Copper compounds]]
[[Category:Copper compounds]]
[[Category:Coordination complexes]]
[[Category:Coordination complexes]]
[[Category:Copper complexes]]
[[Category:Materials unstable in basic solution]]
[[Category:Materials unstable in basic solution]]
[[Category:Materials unstable in acidic solution]]
[[Category:Materials unstable in acidic solution]]
[[Category:Foul smelling compounds]]
[[Category:Foul smelling compounds]]

Revision as of 22:57, 28 August 2018

Schweizer's reagent
Schweizer's reagent.JPG
Schweizer's reagent in aqueous form
IUPAC name
Tetraammine copper(II) hydroxide dihydrate
Other names
Schweitzer's reagent
Molar mass 201.71 g/mol
Appearance Deep blue (solution)
Melting point Decomposes
Boiling point Decomposes
Solubility Reacts with acids
Insoluble in organic solvents, may break down
Safety data sheet None
Flash point Non-flammable
Related compounds
Related compounds
Copper(II) hydroxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Schweizer's reagent (sometimes written as Schweitzer's reagent) is a deep-blue solution of the coordination complex tetraammine copper(II) hydroxide, with the generally accepted formula [Cu(NH3)4(H2O)2](OH)2. This solution can be produced by dissolving copper(II) hydroxide in an excess of ammonia. It is notable for its ability to dissolve cellulose, and a solution of cellulose in Schweizer's reagent can be used to manufacture rayon fiber by injecting it into sulfuric acid solution.

The name Schweizer's reagent is also used for another compound, triphenylvinylphosphonium bromide, though they are very different compounds.



Schweizer's reagent will decompose if heated to give off ammonia.


Schweizer's reagent is a deep-blue solution, with a strong ammonia smell. It can be dried in an ammonia stream, and its crystals are only stable under excess ammonia.


Schweizer's reagent is best made that purchased.


Schweizer's reagent can be made by bubbling ammonia through a copper(II) hydroxide solution. Adding copper metal to a solution of ammonia also yields the complex, though this process takes a long time.




Tetraammine copper(II) hydroxide solutions give off ammonia fumes which are irritant and toxic.

It is also corrosive to copper and copper-based alloys, like brass and bronze.


Best stored in closed bottles or tubes, and kept away from heat. Dry crystals should be kept in an ammonia atmosphere in closed containers.


Heating the compound causes it to release ammonia and leave behind copper(II) hydroxide or oxide. Do this outside or in a fumehood.

Alternatively, you can add an acid and convert the compound to ammonium and copper salts of the acid. Copper ions can be reduced to metallic copper which can be recycled, while ammonium salts can be either recycled or dumped in trash.


Relevant Sciencemadness threads