Sodium cyanoborohydride

From Sciencemadness Wiki
Revision as of 21:17, 30 August 2022 by Mabus (Talk | contribs) (Created page with "{{Chembox | Name = Sodium cyanoborohydride | Reference = | IUPACName = Sodium cyanoborohydride | PIN = | SystematicName = | OtherNames = Sodium borocyanohydride<br>Sodium cyan...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Sodium cyanoborohydride
Names
IUPAC name
Sodium cyanoborohydride
Other names
Sodium borocyanohydride
Sodium cyanotrihydridoborate
Properties
NaBH3CN
Molar mass 62.84 g/mol
Appearance White hygroscopic solid
Odor Odorless
Density 1.12 g/cm3 (25 °C)
Melting point 241 °C (466 °F; 514 K) (decomposition)
Boiling point Decomposes
212 g/100 ml (29 °C)
Solubility Soluble in methanol, THF
Sparingly soluble in ethanol
Insoluble in benzene, diethyl ether, heptane, hexane, toluene, xylene
Solubility in diglyme 17.6 g/100 ml (25 °C)[1]
Solubility in tetrahydrofuran 37.7 g/100 ml (28 °C)[2]
Hazards
Safety data sheet Sigma-Aldrich
Flash point 70 °C (158 °F; 343 K)
Related compounds
Related compounds
Sodium borohydride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Sodium cyanoborohydride is an inorganic chemical compound with the formula NaBH3CN, used as a reducing agent in organic synthesis for the reduction of imines.

Properties

Chemical

Sodium cyanoborohydride can be used to reduce imines, as well as aldehydes, ketones, oximes, enamines. Owing to the presence of the electron-withdrawing cyanide substituent, cyanoborohydride is less reducing than borohydride. As such, it does not reduce amides, ethers, lactones, nitriles, nitro compounds and epoxides.

Aldehydes and ketones are unaffected by sodium cyanoborohydride in neutral solution, but they are readily reduced to the corresponding alcohol at a pH between 3 and 4 by way of the protonated carbonyl group.

Sodium cyanoborohydride resists hydrolysis in water, although prolonged contact with moisture will cause decomposition. It is stable in acidic solution with a pH higher than 3.

Physical

Sodium cyanoborohydride is a hygroscopic white solid, soluble in water and THF.

Availability

Sodium cyanoborohydride can be bought from chemical suppliers.

Preparation

Sodium cyanoborohydride ca be prepared by reacting sodium cyanide with borane. The reaction takes place in anhydrous THF.[3]

A direct route, but very dangerous, involves reacting hydrogen cyanide with sodium borohydride. This is done by adding a THF solution of HCN to a slurry of NaBH4 in THF. Following the addition, the reaction mixture is stirred for 1 h at 25 °C, during which hydrogen is slowly produced. After the stirring is complete, the mixture is heated at reflux until hydrogen evolution has ceased. Filtration followed by vacuum removal of THF gives white solid sodium cyanoborohydride. Yield of this reaction is 91 %.[4]

Another route entails treating sodium borohydride with mercury(II) cyanide.

Projects

  • Reduction of imines
  • Reductive aminations

Handling

Safety

Sodium cyanoborohydride is toxic if ingested, as it contains cyanide. It is flammable.

Storage

In closed airtight bottles. Can also be kept in a desiccator, where it should be dry.

Disposal

Can be neutralized by carefully oxidizing the compound.

References

  1. Общая органическая химия. - Т. 6, под ред. Бартона Д. и Оллиса В.Д. - М.: Химия, 1984 (General organic chemistry. - T. 6, ed. Barton D. and Ollis W.D. - M.: Chemistry, 1984)
  2. Общая органическая химия. - Т. 6, под ред. Бартона Д. и Оллиса В.Д. - М.: Химия, 1984 (General organic chemistry. - T. 6, ed. Barton D. and Ollis W.D. - M.: Chemistry, 1984)
  3. Benjamin C. Hui, Synthesis and properties of borohydride derivatives, Inorg. Chem. 19, 3185-3186 (1980)
  4. Lane, C. F., Synthesis 135 (1975)

Relevant Sciencemadness threads