Difference between revisions of "Thistle tube"

From Sciencemadness Wiki
Jump to: navigation, search
(Created page with "{{Stub}} Glass and plastic thistle tubes A '''thistle tube''' or '''thistle funnel''', is a piece of laboratory glassw...")
 
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
{{distinguish|Thiele tube}}
 
{{Stub}}
 
{{Stub}}
 
[[File:Thistle tubes glass and plastic.jpg|thumb|200px|Glass and plastic thistle tubes]]
 
[[File:Thistle tubes glass and plastic.jpg|thumb|200px|Glass and plastic thistle tubes]]
Line 6: Line 7:
 
A Thistle tube consists of a long borosilicate glass or plastic tube with a small bulb with funnel shape at the top. Liquids are poured in the bulb section and then are allowed to freely flow in the flask.
 
A Thistle tube consists of a long borosilicate glass or plastic tube with a small bulb with funnel shape at the top. Liquids are poured in the bulb section and then are allowed to freely flow in the flask.
  
Since they're meant to handle liquids, thistle tubes do not have ground glass joints. Glassware similar to thistle tubes but with female ground glass joints are called [[gas inlet tube]]s and, as their name suggests, are used to inject gases in flasks rather than liquids.
+
Since they're meant to handle liquids, thistle tubes do not have [[ground glass joint]]s. Glassware similar to thistle tubes but with female ground glass joints are called [[gas inlet tube]]s and, as their name suggests, are used to inject gases in flasks rather than liquids.
  
 
==Availability==
 
==Availability==
Line 14: Line 15:
 
You can make a crude thistle tube by taking a bulb pipette and cutting it at the level of the bulb, around 3/4 of the bulb height. If you know how to work with glass, you can use a gas torch to soften the upper part of the cut bulb to carefully deform it and make a small funnel, though this is not always required, as some thistle tube models are just funnels with really long stems.
 
You can make a crude thistle tube by taking a bulb pipette and cutting it at the level of the bulb, around 3/4 of the bulb height. If you know how to work with glass, you can use a gas torch to soften the upper part of the cut bulb to carefully deform it and make a small funnel, though this is not always required, as some thistle tube models are just funnels with really long stems.
  
For plastic thistle tubes, take a plastic funnel and glue it to a rigid plastic tube.
+
For plastic thistle tubes, take a small plastic funnel and glue it to a long rigid plastic tube.
  
 
==See also==
 
==See also==
 
*[[Cannula transfer]]
 
*[[Cannula transfer]]
 
*[[Funnel]]
 
*[[Funnel]]
 +
*[[Gas inlet tube]]
  
 
==References==
 
==References==

Latest revision as of 15:42, 24 September 2019

Not to be confused with Thiele tube.
Glass and plastic thistle tubes

A thistle tube or thistle funnel, is a piece of laboratory glassware consisting of a shaft of tube, with a reservoir and funnel-like section at the top, which are often used by chemists to add liquid to an existing system or apparatus, often through a hole in a stopper.

General

A Thistle tube consists of a long borosilicate glass or plastic tube with a small bulb with funnel shape at the top. Liquids are poured in the bulb section and then are allowed to freely flow in the flask.

Since they're meant to handle liquids, thistle tubes do not have ground glass joints. Glassware similar to thistle tubes but with female ground glass joints are called gas inlet tubes and, as their name suggests, are used to inject gases in flasks rather than liquids.

Availability

Thistle tubes can be bought online or from lab suppliers.

DIY thistle tube

You can make a crude thistle tube by taking a bulb pipette and cutting it at the level of the bulb, around 3/4 of the bulb height. If you know how to work with glass, you can use a gas torch to soften the upper part of the cut bulb to carefully deform it and make a small funnel, though this is not always required, as some thistle tube models are just funnels with really long stems.

For plastic thistle tubes, take a small plastic funnel and glue it to a long rigid plastic tube.

See also

References

Relevant Sciencemadness threads