Ultimate tensile strength

From Sciencemadness Wiki
Revision as of 20:59, 11 October 2022 by Mabus (Talk | contribs) (Created page with "{{Stub}} '''Ultimate tensile strength''' ('''UTS'''), commonly shortened to '''tensile strength''' ('''TS'''), '''ultimate strength''', or '''F<sub>tu</sub>''' within equatio...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Ultimate tensile strength (UTS), commonly shortened to tensile strength (TS), ultimate strength, or Ftu within equations, is the maximum stress that a material can withstand while being stretched or pulled before breaking. In brittle materials the ultimate tensile strength is close to the yield point, whereas in ductile materials the ultimate tensile strength can be much higher.

General

Tensile strength is defined as a stress, which is measured as force per unit area. For some non-homogeneous materials (or for assembled components) it can be reported just as a force or as a force per unit width. In the International System of Units (SI), the unit is the pascal (Pa) (or a multiple thereof, often megapascals (MPa), using the SI prefix mega); or, equivalently to pascals, newtons per square meter (N/m2).

Some materials break very sharply, without plastic deformation, in what is called a brittle failure. Others, which are more ductile, including most metals, experience some plastic deformation and possibly necking before fracture.

Typically, the testing for UTS involves taking a small sample with a fixed cross-sectional area, and then pulling it with a tensometer at a constant strain (change in gauge length divided by initial gauge length) rate until the sample breaks.

References

Relevant Sciencemadness threads