| Search |
ETN Stability as primary explosive
@Ral123
The bottom is not sealed with epoxy.
The Heat-shrink tubing is heat up until she tighten ... |
17-1-2014 at 00:02
by: Fuse |
ETN Stability as primary explosive
The purpose of tiny capacitors is simply to stop the pipe 
With the cap I set off ammonium nitrat ... |
16-1-2014 at 09:45
by: Fuse |
Detonation of erythritol tetranitrate (ETN) with heated aluminum
HMTD is an organic peroxide, avoid to use them.
Also, it is extremely sensitive to friction. |
16-1-2014 at 06:57
by: Fuse |
Detonation of erythritol tetranitrate (ETN) with heated aluminum
Sorry for incomplete informations..
Green string is 2mm visco fuse and foil is aluminum foil for ... |
16-1-2014 at 03:14
by: Fuse |
Detonation of erythritol tetranitrate (ETN) with heated aluminum
Yes, in past I used the procedure in the picture
[file]28673[/file] |
16-1-2014 at 02:27
by: Fuse |
ETN Stability as primary explosive
@underground
In the #1 image you can see the violet cable cut, inside it there are 2 wires: blue ... |
16-1-2014 at 02:21
by: Fuse |
ETN Stability as primary explosive
@underground
I've attached photos of EBW ETN cap. It is complete hermetic.
[file]28654[/fi ... |
16-1-2014 at 00:45
by: Fuse |
ETN Stability as primary explosive
I use 50mt of multicore wire (alpha wire), it's diameter is 5mm.
I trigger capacitor using a diy tr ... |
14-1-2014 at 23:58
by: Fuse |
ETN Stability as primary explosive
I set off a lot of charges with EBW (1uF 4kV) and 0,3g ETN.
Very reliable system. |
14-1-2014 at 05:06
by: Fuse |
The most dangerous moment in a blast and its solution
Trigatron is very simple, safe, cheap and works well.
Switching electrodes manually is prehistoric ... |
15-10-2013 at 00:46
by: Fuse |
The most dangerous moment in a blast and its solution
@Antiswat I saw the video and it’s a good idea, it can be a great solution, obviously the cap must ... |
19-9-2013 at 07:31
by: Fuse |
The most dangerous moment in a blast and its solution
I’ve built more EBW systems and all works great.
Have a look on my youtube channel I’ve posted ... |
19-9-2013 at 03:05
by: Fuse |
Has anyone made a EBW setup.
The energy stored in the capacitor is 8J, from that you can transfer about 0,5-1J into exploding wir ... |
27-2-2013 at 01:37
by: Fuse |
ETN recrystallization for max density
In the recrystallization process via hot ethanol i've tryed two ways to obtain high density:
1) Et ... |
26-2-2013 at 05:17
by: Fuse |
Has anyone made a EBW setup.
http://www.youtube.com/watch?v=IXMDltOiNpU
With this I detonate ETN directly  |
26-2-2013 at 05:02
by: Fuse |
Has anyone made a EBW setup.
I've built one, some videos posted on youtube with "Freepatentsonline" nick.
|
25-2-2013 at 06:45
by: Fuse |
