Sciencemadness Discussion Board

Rusting from HCl Bottle

Abromination - 7-12-2018 at 20:39

I have been noticing some rusting in my lab originating from my gallon bottle of HCl. I put a piece of aluminium foil over the cap as a sacrificial layer, although it corrodes rather quickly. Anybody else have solutions?

[Edited on 8-12-18 by Abromination]

UC235 - 7-12-2018 at 21:03

Put it in glass bottles that actually seal.

Abromination - 7-12-2018 at 22:17

I'm not spending money on a gallon glass bottle with teflon cap...

IMG_5080.PNG.jpg - 32kB

greenlight - 7-12-2018 at 22:37

I used to have the same problem with everything rusting in my lab. I have multi litre quantities of nitric, sulphuric and hydrochloric to store and it was eating my lab.

I bolted a large metal cupboard to the concrete floor in a separate small locked shed with an expensive lock to stop things getting stolen and store all acids in there.
No more problems in the lab since then and I have smaller 500ml duran bottles with good lids I fill from the large containers which I store in the lab fridge for experiments.

So yeah, just store it elsewhere were it can't damage anything expensive in your lab.

j_sum1 - 7-12-2018 at 22:45

Bulk volatile acids can go in a sealed plastic tub. Cover the bottom of the tub with a generous amount of sodium bicarbonate. Put your bottles in. Shut the lid. And if you can put the entire unit somewhere reasonably well ventilated, then even better. This won't completely solve the problem but it will help a lot.

Heptylene - 8-12-2018 at 12:29

There aren't that many way to deal with corrosive vapors:
1. Get a better bottle that actually seals (actually even the Duran PTFE red caps leak over time, albeit slowly)
2. Use a sacrificial material to capture the vapors (Sodium bicarbonate, aluminum foil, etc.)
3. Store it where there is nothing to corrode (outside)

Best option is number 1. combined with number 2. If you don't want to spend on number 1. just use a box full of Al foil. It will take a long time to corrode all of it, and Al foil is much cheaper than replacing your tools and furniture.

monolithic - 8-12-2018 at 14:01

Quote: Originally posted by Abromination  
I'm not spending money on a gallon glass bottle with teflon cap...


Don't buy from scientific suppliers, they're scam artists.

Gallon glass bottle: https://www.amazon.com/Home-Brew-Ohio-Polyseal-Capacity/dp/B...

38mm PTFE cap: https://www.usplastic.com/catalog/item.aspx?itemid=23577&...

Mr. Rogers - 8-12-2018 at 14:50

Quote: Originally posted by monolithic  
Quote: Originally posted by Abromination  
I'm not spending money on a gallon glass bottle with teflon cap...


Don't buy from scientific suppliers, they're scam artists.

Gallon glass bottle: https://www.amazon.com/Home-Brew-Ohio-Polyseal-Capacity/dp/B...

38mm PTFE cap: https://www.usplastic.com/catalog/item.aspx?itemid=23577&...


Well, that price is for a case of 12 bottles. That's a poor scam if that's what they're trying to pull.

monolithic - 8-12-2018 at 15:13

Quote: Originally posted by Mr. Rogers  
Quote: Originally posted by monolithic  
Quote: Originally posted by Abromination  
I'm not spending money on a gallon glass bottle with teflon cap...


Don't buy from scientific suppliers, they're scam artists.

Gallon glass bottle: https://www.amazon.com/Home-Brew-Ohio-Polyseal-Capacity/dp/B...

38mm PTFE cap: https://www.usplastic.com/catalog/item.aspx?itemid=23577&...


Well, that price is for a case of 12 bottles. That's a poor scam if that's what they're trying to pull.


Those are 16 oz bottles in the screenshot. My link is for a 128 oz bottle. If you want 16 oz bottles, they're about $20 for a 12 pack on Amazon.

[Edited on 8-12-2018 by monolithic]

CharlieA - 8-12-2018 at 16:06

My semi-facetious suggestion: If you need a gallon size glass jug, buy a gallon of table wine. Drink the wine. There must be somewhere that you can get a thin sheet of PTFE.
Cut a liner for the wine jug cap from the PTFE. :):):)

XeonTheMGPony - 8-12-2018 at 18:06

They are plastic coated, as mandated by safety codes for acids. That adds to the cost a bit.

Sulaiman - 9-12-2018 at 00:48

I dilute some of my 36% HCl to 1M for daily use that I keep out on the shelves in a glass bottle,
there are no visible signs of corrosion nearby.

My 36% HCl, which is well above azeotropic, I keep in a hdpe bottle in a pp tub.
The same tub that I keep my 33% ammonia solution in - which seems to leak gas at a similar rate.
Result, no obvious smell of HCl or NH3 but white dust in the tub.

BromicAcid - 9-12-2018 at 06:26

Get a 5 gallon bucket with a lid, either repurposed or from a home improvement store (just a couple bucks). Pour a container of bicarb into the bottom of the bucket. Sit the bottle of HCl in the bucket, place the lid on top. Do not bother sealing the lid, they can be a pain to remove, just sit something on top.

I_love_Diethylether - 9-12-2018 at 06:47

So, what i usually do with corrosive volatile stuff. I take these PTFE toaster bags, cut out a square, tape some PTFE tape around the bottle-plug and put the foil in between the plug and the opening. In the end i wrap the opening with a generous amount of gladwrap. Worked out for me so far.

AJKOER - 9-12-2018 at 11:34

I think the ammonia companion bottle is a better idea than NaHCO3 because each mole of NaHCO3 reacted with acidic fumes makes over 22 liters of CO2!

Depending on ventilation, where (basement more problematic) and how big is ones lab may become deadly significant, especially if there is a visit from a small pet!

[Edited on 9-12-2018 by AJKOER]

j_sum1 - 9-12-2018 at 16:40

Quote: Originally posted by AJKOER  
I think the ammonia companion bottle is a better idea than NaHCO3 because each mole of NaHCO3 reacted with acidic fumes makes over 22 liters of CO2!

Depending on ventilation, where (basement more problematic) and how big is ones lab may become deadly significant, especially if there is a visit from a small pet!

[Edited on 9-12-2018 by AJKOER]

I keep my ammonia in the fridge to minimise losses. It is less easy for me to get than HCl. I suppose I could keep my HCl in there but at significant loss of space. I carry significantly different volumes of the two reagents.

As for the build up of CO2. Not really a problem. One litre of HCl vapor produces a litre of CO2 by the method I suggested. You could knock this down by half or to zero by using Na2CO3 or NaOH. But I like what is cheap and available and not hygroscopic. You are not going to gas any critters with CO2 any more than you currently are with HCl. In my case I am fortunate to have really good ground level ventilation and so no way that gases can build up anyway.

Ubya - 9-12-2018 at 17:17

Quote: Originally posted by AJKOER  
I think the ammonia companion bottle is a better idea than NaHCO3 because each mole of NaHCO3 reacted with acidic fumes makes over 22 liters of CO2!

Depending on ventilation, where (basement more problematic) and how big is ones lab may become deadly significant, especially if there is a visit from a small pet!

[Edited on 9-12-2018 by AJKOER]

22 liters of "acidic fumes" produce 22 liters of CO2, better CO2 than ammonia or HCl

MrHomeScientist - 10-12-2018 at 07:19

A slowly leaking gallon jug of acid reacting with a tub of baking soda will NEVER produce dangerous concentrations of CO2 in a room. Change my mind.

BromicAcid - 10-12-2018 at 14:03

The rate of effusion of hydrogen chloride through the bottle and cap would be of an entirely different magnitude than the diffusion of the created carbon dioxide. If I took a box of bicarbonate, put it in a bucket and poured the entire gallon of acid into the bucket I would not have worry one about suffocating on the carbon dioxide vapor.

RogueRose - 10-12-2018 at 15:47

I've found bleach bottles seal HCl very well, especially pool shock bottles. The 32% HCl here comes in the same bottles as the pool shock. HDPE with a HDPE lid, some with a foil lined lid, with a plastic coating on the foil. Put the cap on tight and it should be alright.

@RogueRose

Sulaiman - 11-12-2018 at 02:52

That is precisely the bottle & cap type that I keep my 36% HCl in,
the bottle of HCl that needs a bottle of ammonia solution nearby
as judging by the pattern of ammonium chloride dust
HCl gas can diffuse through the wall of the bottle.
(no proof or reference, just an observation)

P.S. 96% H2SO4 in hdpe produces more white dust than 36% HCl on the bottle walls,
I guess because ammonium sulphate is less volatile than ammonium chloride.
96% H2SO4 also discolours over time in a hdpe bottle which is why I transferred mine to glass bottles.

I've not noticed much 'dust' on 69% HNO3 bottles in the same tub
- I've no idea why it is different.

[Edited on 11-12-2018 by Sulaiman]

Abromination - 11-12-2018 at 16:31

I feel that I should mention it is an HDPE bottle with a HDPE cap, and the acid is azeotropic.

draculic acid69 - 24-12-2018 at 01:46

Use empty coke bottles for HCl storage there is no need for glass. the hydrochloric acid bottles suck.the only thing that coke bottles can't hold are H2SO4.

S.C. Wack - 24-12-2018 at 04:06

It's weird how OTC sulfuric acid drain cleaners are often sold in bottles in bags, but the rows and rows of conc. HCl (potentially rusting the entire stock of the store) are never in bags.

r0749547 - 29-12-2018 at 12:09

I use HDPE bottles.
you can buy some for about 2 euros/piece in a brewery store.

Abromination - 29-12-2018 at 13:39

Quote: Originally posted by S.C. Wack  
It's weird how OTC sulfuric acid drain cleaners are often sold in bottles in bags, but the rows and rows of conc. HCl (potentially rusting the entire stock of the store) are never in bags.


I wondered that at first too, but they all have teflon safety sealants under the caps.

lordcookies24 - 3-1-2019 at 06:02

Quote: Originally posted by Abromination  
I'm not spending money on a gallon glass bottle with teflon cap...


There is cheaper stuff like this

https://www.medical-and-lab-supplies.com/wheaton-standard-gl...

Ubya - 3-1-2019 at 08:46

Quote: Originally posted by lordcookies24  
Quote: Originally posted by Abromination  
I'm not spending money on a gallon glass bottle with teflon cap...


There is cheaper stuff like this

https://www.medical-and-lab-supplies.com/wheaton-standard-gl...


still 30$ each bottle:o

lordcookies24 - 3-1-2019 at 15:11

Quote: Originally posted by Ubya  
Quote: Originally posted by lordcookies24  
Quote: Originally posted by Abromination  
I'm not spending money on a gallon glass bottle with teflon cap...


There is cheaper stuff like this

https://www.medical-and-lab-supplies.com/wheaton-standard-gl...


still 30$ each bottle:o


it's an expensive hobby :(

Abromination - 3-1-2019 at 23:38

Quote: Originally posted by lordcookies24  
Quote: Originally posted by Ubya  
Quote: Originally posted by lordcookies24  
Quote: Originally posted by Abromination  
I'm not spending money on a gallon glass bottle with teflon cap...


There is cheaper stuff like this

https://www.medical-and-lab-supplies.com/wheaton-standard-gl...


still 30$ each bottle:o


it's an expensive hobby :(


And I currently have about 40 dollars to spend... tough luck