Sciencemadness Discussion Board

phenyl ring and piracetam

phakt - 24-3-2019 at 20:29

Hello,

given someone need phenylpiracetam and only have piracetam, is it possible to add a phenyl ring into piracetam?
how can that be done? any simple way?

[Edited on 25-3-2019 by phakt]

Sigmatropic - 25-3-2019 at 01:31

Depends on where on the molecule you'd want to put it. It would be interesting if you tell us where and why you'd want a phenyl group at a specific location.

For sure the amide can be phenylated in a Buchwald-Hartwig amination
And the alpha position of the pyrolidone also looks suitable for some kind of coupling reaction.

But in any case I doubt the most efficient route would use piracetam as a starting material and you're very likely to end up with too much heavy metal content in the product for 'research purposes'.

CuReUS - 25-3-2019 at 08:00

Quote: Originally posted by Sigmatropic  
Depends on where on the molecule you'd want to put it.
https://en.wikipedia.org/wiki/Phenylpiracetam

You could make it this way

1a - https://www.chem.wisc.edu/areas/reich/papers/Reich-1975-JACS...

1b - https://www.sciencedirect.com/science/article/pii/S004040390...

2.Reaction of the en-lactam with phenyl grignard in the presence of CuCl https://en.wikipedia.org/wiki/Reactions_of_organocopper_reag...

Since lactams(amides) are also carbonyl compounds ,albeit less reactive,they should also react similar to ketones to form en-lactams which should further undergo michael addition to give phenylpiracetam

phenylpiracetam.png - 3kB

[Edited on 25-3-2019 by CuReUS]

rase - 25-3-2019 at 15:40

Quote: Originally posted by CuReUS  
Quote: Originally posted by Sigmatropic  
Depends on where on the molecule you'd want to put it.
https://en.wikipedia.org/wiki/Phenylpiracetam

You could make it this way

1a - https://www.chem.wisc.edu/areas/reich/papers/Reich-1975-JACS...

1b - https://www.sciencedirect.com/science/article/pii/S004040390...

2.Reaction of the en-lactam with phenyl grignard in the presence of CuCl https://en.wikipedia.org/wiki/Reactions_of_organocopper_reag...

Since lactams(amides) are also carbonyl compounds ,albeit less reactive,they should also react similar to ketones to form en-lactams which should further undergo michael addition to give phenylpiracetam



[Edited on 25-3-2019 by CuReUS]


is pyrolidone an analog of phenylpiracetam?

looks like phenylpiracetam is not commercialized anymore in Russia.. what could be the alternatives to obtain?

is there a natural or a synthetic chemical with the same or similar properties of phenylpiracetam?

when the phenyl ring is added into piracetam what are the main changes on the piracetam properties?

Thank you

rase - 27-4-2019 at 20:46

BUMP.

can someone answer?

Thanks

Assured Fish - 27-4-2019 at 22:22

Quote: Originally posted by rase  
BUMP.

can someone answer?

Thanks

No, its a precursor.

I think CuReUS's step 1 could be substituted with alpha halogenation of the ketone followed by E1 elimination. The question would be whether the pyrrolidone ring is prone to hydrolosis in the somewhat harsh conditions required for the halogenation.
However, im not so sure enolation of amides is a very easy thing to do, the only way ive found requires low temperatures so maybe hes right.

CuReUS - 27-4-2019 at 22:32

Quote: Originally posted by Assured Fish  
I think CuReUS's step 1 could be substituted with alpha halogenation of the ketone followed by E1 elimination.
If the halogen is on the alpha carbon,when it leaves ,it will create a carbocation right next to the ketone.Since ketones are electron withdrawing,the carbocation formed won't be stabilised and so the reaction won't happen.
For your idea to work,the halogen should be on the beta carbon ;) . The leaving group in that case would be hydrogen as H+,and the corresponding carbanion formed would be stabilised by the electron withdrawing ketone .

[Edited on 28-4-2019 by CuReUS]

Assured Fish - 27-4-2019 at 23:23

Quote: Originally posted by CuReUS  

For your idea to work,the halogen should be on the beta carbon ;) . The leaving group in that case would be hydrogen as H+,and the corresponding carbanion formed would be stabilised by the electron withdrawing ketone .

[Edited on 28-4-2019 by CuReUS]

Um, The H+ would be picked up by an alkoxide anion, the leaving group would be a halide which is picked up by an alkyli metal cation from the potassium methoxide (alkali metal alkoxide).

The resulting electrons on the carbons would have only one thing left to do and that form a pi bond (double bond).
There is no proton on the carbonyl carbon but there is one at the beta position, therefore if the halide was at the alpha position then it would only have one way for the elimination to go.
https://en.wikipedia.org/wiki/Elimination_reaction

In principle it is identical to the reaction you proposed however instead of a selenium oxide leaving group instead you have a halide leaving group, the only advantage your paper suggests is lower temperature and milder conditions.

The resulting alkene can then undergo enantioselective addition.

CuReUS - 28-4-2019 at 10:31

Quote: Originally posted by Assured Fish  
Quote: Originally posted by CuReUS  

For your idea to work,the halogen should be on the beta carbon ;) . The leaving group in that case would be hydrogen as H+,and the corresponding carbanion formed would be stabilised by the electron withdrawing ketone .

[Edited on 28-4-2019 by CuReUS]

Um, The H+ would be picked up by an alkoxide anion, the leaving group would be a halide which is picked up by an alkyli metal cation from the potassium methoxide (alkali metal alkoxide).
The leaving group by definition is obviously the halogen,but the Hydrogen also has to leave(or get "picked up " as you call it) for the bond to form.What I am mainly trying to convey is that-
1.Carbocations CAN'T form next to electron withdrawing group
2.Carbanions CAN'T form next to electron donating groups

Can't form doesn't mean its impossible,but for most reactions,its doesn't happen

so putting a halogen on the alpha carbon is going to form a carbocation right next to the E withdrawing group,leading to destability and consequently,a failed reaction.
Quote:
In principle it is identical to the reaction you proposed however instead of a selenium oxide leaving group instead you have a halide leaving group
please provide me a ref where an alpha haloketone is converted to an enone

Assured Fish - 28-4-2019 at 21:18

Alright fine, i got nothing.
Lesson learned, back to the books.

Optimum - 4-8-2019 at 14:24

can anyone tell a bit more about the actual procedure?

it would be better to synth phenylpiracetam from scratch or buy piracetam and use chemistry procedure to join phenyl to piracetam?
how could i do the second procedure?

Thanks

Assured Fish - 4-8-2019 at 21:38

Quote: Originally posted by Optimum  
can anyone tell a bit more about the actual procedure?

it would be better to synth phenylpiracetam from scratch or buy piracetam and use chemistry procedure to join phenyl to piracetam?
how could i do the second procedure?

Thanks

The second step is a grignard reaction in the presence of a catalytic amount of a Cu(I) salt.
Cuprous chloride isn't the easiest to prepare mind you and grignard reaction are well, tricky and tedious with the amount of prep required.
This reaction and its yields will also suffer as a result of there being an amide present which will engage in side reactions.
The obvious solution is to keep the enone in excess.

If you don't have the know how to generate your own procedure from this knowledge alone then im sorry to tell you but you lack the knowledge to achieve the desired results anyhow, this is a tricky reaction and work up.

Grignard reactions are famous though and there is a hell of a lot of literature on the topic, so perhaps there is where you should start.