Sciencemadness Discussion Board

Aspirin to...

HeYBrO - 6-12-2013 at 16:52

Hey everyone, awesome forum!
I had an idea similar to the extract benzene thread: Aspirin to "."

Acetylsalicylic acid is a great starting point for many reactions due to its versatility and aspirin is a cheap source of it. I think there should be a thread sort of like the benzene one. This thread could list experiments that can be done with aspirin as a starting point. the thread could start with the humble extraction of ASA from aspirin + purification, Then hydrolysis to salicylic acid, to phenol (UC's Prep) etc. Other experiments could include metal ion complexes (with SA), copper aspirinate, esterification the list goes on..

eventually it could become a publication with many user made experiments. I'm sure many of you have great write ups that use aspirin as a starting point etc... What do you think? suggestion and experiments are welcome. keen to hear ideas!


note: hopefully this was posted in the right place. please move if not.

Zephyr - 6-12-2013 at 17:44

this is a great thread on the synthesis of copper asprinate from purified acetesalysilic acid, the procedure for the purification of aspirin is also covered in this thread.
http://www.sciencemadness.org/talk/viewthread.php?tid=9920

bfesser - 6-12-2013 at 19:15

I have a couple folders in my file cabinet dedicated to papers on aspirin. I'll see if I can gather some links, references, and existing topics.
Quote: Originally posted by HeYBrO  
I had an idea similar to the extract benzene thread:
It took me a minute to find the thread you're referring to. For anyone else who doesn't know: <strong><a href="viewthread.php?tid=4902">Extract of Benzene thread</a></strong>

[edit] I can't access my file cabinet. It could be a while... if I remember at all.

[Edited on 12.12.13 by bfesser]

Paddywhacker - 7-12-2013 at 18:49

Nitrate in mild conditions and then separate the 3-nitro and 5-nitro salicylic acids. Good substrate for column chromatography, as both compounds are yellow.

Get enough of the nitrosalycilates and you can reduce them to the corresponding aminosalycilates.

You can diazotize the amino compounds and couple them with something like 2-naphthol to make two different azo dyes. Permanently dye something by painting it with 2-naphthol and then dipping in a solution of the diazonium mix.

Nicodem - 8-12-2013 at 01:12

Quote: Originally posted by HeYBrO  
I had an idea similar to the extract benzene thread: Aspirin to "."

You are welcome to review the literature and add the results to the index here:

https://www.sciencemadness.org/whisper/viewthread.php?tid=27...

https://www.sciencemadness.org/whisper/viewthread.php?tid=27...

It is a project that is still (unsuccessfully) trying to get a life, but lacking any volunteer to do the work. It is great that you are interested in doing it for aspirin (and salicylic acid).

Paddywhacker - 8-12-2013 at 03:12

Thanks for pointing that out, Nicodem. Although you have probably done that before, I hadn't appreciated what a useful resource that you have created.

Further to the OP, extra nitration can give 3,5-Dinitrosalicylic acid, and even very mild reducing agents will reduce that to 3-amino-5-nitrosalicylic acid. That gives you two new compounds, and one of them is an aromatic amine that might be turned into another azo dye.

Of course, these salicylic derivatives may also be esterified. Methyl salicylate has the interesting smell of Oil of Wintergreen, or Linament. Imagine what the esters of these derivatives might smell like.


[Edited on 8-12-2013 by Paddywhacker]

plante1999 - 8-12-2013 at 09:21

In theory one could make benzene by refluxing salycilic acid with zinc dust. The idea is based on the classical reduction of phenol with zinc dust to yield benzene and zinc oxide.

Although I would not say aspirins are cheap here, 15$ for about 150 g of active compound.

Zephyr - 8-12-2013 at 20:13

The synthesis of aspirin itself is very simple and you would save money by making your own and not buying it at the drugstore.
the procedure:

1.Weigh out 3.0 g of salicylic acid and place in a 250 ml Erlenmeyer flask.
2.Measure out 6.0 ml of acetic anhydride and add this to your flask.
3.Add 5 to 10 drops of 85% phosphoric acid, a catalyst, to the flask and swirl to mix everything thoroughly.
4.Heat the mixture for about 10 min. in a beaker of warm water (70-80 oC).
5.After heating add 20 ml of distilled water and cool in an ice bath. Crystals should fall out of solution immediately, if they don't, induce crystallization by scratching the inside of the flask.
6.Filter and dry the aspirin.

Quote: Originally posted by plante1999  

Although I would not say aspirins are cheap here, 15$ for about 150 g of active compound.


By making your own aspirin and buying all chemicals new from DudaDiesel and UnitedNuclear you could make ruffly 1050g (assuming 80% yield) for $82.

907g salicylic acid from unitednuclear $60
950ml Phosphoric acid from DudaDiesel $12
950ml Glacial acetic acid from DudaDiesel $10
Plus you are left with extra Phosphoric acid and AA.

hmm... I wonder if one could commercialize this procedure and make money by charging less absurd prices for drugs and by buying chemicals bulk...

ps. my calculations may be off by a huge margin....

http://www.dudadiesel.com/search.php?query=acetic
http://unitednuclear.com/index.php?main_page=product_info&am...

how to make aspirin:
http://wwwchem.csustan.edu/consumer/aspirincons/aspirincons....
http://www.youtube.com/watch?v=amTAuK25P6c

hyfalcon - 8-12-2013 at 20:30

I just bought 4 bottles of 1000 aspirins for $37.15. That's 1300g of active ingredient. Acetone should be able to separate the active from the starch binder with just a simple filtration. I would want to do a vacuum distillation just to keep the heat down to keep the salicylic acid molecule from deacetylating and recycle the acetone.

[Edited on 9-12-2013 by hyfalcon]

[Edited on 9-12-2013 by hyfalcon]

bbartlog - 9-12-2013 at 07:03

Quote: Originally posted by Pinkhippo11  
...you would save money by making your own...


No. In this particular case it's blindingly obvious that this is wrong (because aspirin is dirt cheap in bulk, in US market at least), but even in cases where things superficially look more promising, there is always the time value of your own labor, the uncertainty in the outcome, and the initial investment in getting the reaction to work.
Also, your reaction steps involve acetic anhydride but the price you give is for glacial acetic acid. But it doesn't really matter, it wouldn't be economical regardless.

Boffis - 9-12-2013 at 10:24

I think the HeyBro's original post was asking what can be done with aspirin not how you make it. You can buy both aspirin and salicylic acid off ebay for peanuts why waste time making it?

@ HeyBro I suggest you use the search engine and check out the picric acid thread, the sulphosalicylic acid prep tread, Phenol .... etc

HeYBrO - 9-12-2013 at 16:12

"@ HeyBro I suggest you use the search engine and check out the picric acid thread, the sulphosalicylic acid prep tread, Phenol .... etc "

the point of this thread was to collectively post experiments (from aspirin and its derivatives ) and bounce ideas from one and other so everyone could benefit, other wise i would of just searched them and not made a thread.
thanks for the links Nicodem, but i can't access them, safari says the certificate is funny. all of the https SM threads i can't get access to for some reason. Any way, thanks for awesome ideas so far. my idea is this "aspirin to paracetamol"

1. hydrolyse ASA to yield SA
2. decarboxylate SA to yield phenol
3.nitrate phenol with Sodium nitrate and dilute sulphuric acid
3. extract and purify 4-nitrophenol from reaction mixture ( also containing 2-nitrophenol, among other things)
4. Reduce nitro group to an amine (can't exactly do this step as i don't have a strong enough reducer such as NaBH4)
5. acetylation of 4-aminophenol to form N-(4-hydroxyphenyl)ethanamide aka paracetamol

Of course this is heavily over simplified but it's just my idea for aspirin to paracetamol. This is also just explore some organic synthesis and for the challenge. Thoughts?

[Edited on 10-12-2013 by HeYBrO]

Nicodem - 10-12-2013 at 06:42

Quote: Originally posted by HeYBrO  
thanks for the links Nicodem, but i can't access them, safari says the certificate is funny. all of the https SM threads i can't get access to for some reason.

Obviously, like for any HTTPS site, you first need to accept the certificate. By refusing it, you essentially say to your browser that you do not want to access the site trough the HTTPS protocol (so it refuses you access). I doubt that your "safari says the certificate is funny". That sounds a bit non-profesional coming from some software. Utmost it says it is self-signed or something like that, which is irrelevant to what you want (access). By the way, we even have a search engine where you can type in "aspirin".

HeYBrO - 10-12-2013 at 15:56

Ok, thanks Nicodem.
edit: for my last post here are some references
http://home.comcast.net/~drewpoche/CHEM3/CHEM_III_labs_files...
http://www.rsc.org/learn-chemistry/content/filerepository/CM...


[Edited on 11-12-2013 by HeYBrO]

HeYBrO - 12-12-2013 at 03:17


[img][/img]
My proposed ( and simplified) reaction scheme with some products omitted.



ASA 2.png - 68kB

[Edited on 12-12-2013 by HeYBrO]

[Edited on 12-12-2013 by HeYBrO]

Nicodem - 12-12-2013 at 11:43

A scheme obviously is of no value without references. What is the reference for the nitration? Where did you got that reduction of the nitro group with NaBH4, and what does Pb do there?

And to complete the irony of the aspirin to paracetamol transformation, make sure you do the N-acetylation with aspirin as the reagent:
https://www.sciencemadness.org/whisper/viewthread.php?tid=11...

HeYBrO - 12-12-2013 at 13:14

if looked a little closer, Nicodem, you would see all the relevant information for this scheme including my original idea, which, apparently you ignored and scolded me for saying "safari says the certificate is funny". here you go, all on one post:

1. hydrolyse ASA to yield SA
2. decarboxylate SA to yield phenol
3.nitrate phenol with Sodium nitrate and dilute sulphuric acid
3. extract and purify 4-nitrophenol from reaction mixture ( also containing 2-nitrophenol, among other things)
4. Reduce nitro group to an amine (can't exactly do this step as i don't have a strong enough reducer such as NaBH4)
5. acetylation of 4-aminophenol to form N-(4-hydroxyphenyl)ethanamide aka paracetamol

references:
http://home.comcast.net/~drewpoche/CHEM3/CHEM_III_labs_files... http://www.rsc.org/learn-chemistry/content/filerepository/CM...
course this is heavily over simplified but it's just my idea for
aspirin to paracetamol. This is also just explore some organic synthesis and for the challenge. Thoughts? feel free to delete my other posts.

ASA 2.png - 68kB

[Edited on 13-12-2013 by HeYBrO]

macckone - 13-12-2013 at 02:00

Quote: Originally posted by HeYBrO  

3.nitrate phenol with Sodium nitrate and dilute sulphuric acid
3. extract and purify 4-nitrophenol from reaction mixture ( also containing 2-nitrophenol, among other things)


'among other things' may be explosive. Ie. picric acid.
Chemistry is never 100% safe but without a more thorough
description of the process (ie. reagent amounts and method)
this could be dangerous for beginners.

Seeing as this is the beginnings forum, a warning is probably in order.

HeYBrO - 13-12-2013 at 04:06

are serious macckone? if you haven't noticed 95% of the posts on this forum are dangerous and without warning. does no one here read posts to the end? " course this is heavily over simplified but it's just my idea for aspirin to paracetamol". I'm sorry if this comes off antagonistic, but it seems generally people like to ignore the chemistry and rather nit pick even if the information is there. I gave my sources, which give adequate warning about the hazards of Phenol to paracetamol. http://www.rsc.org/learn-chemistry/content/filerepository/CM...

Nicodem - 13-12-2013 at 08:40

Quote: Originally posted by HeYBrO  
I'm sorry if this comes off antagonistic, but it seems generally people like to ignore the chemistry and rather nit pick even if the information is there. I gave my sources, which give adequate warning about the hazards of Phenol to paracetamol. http://www.rsc.org/learn-chemistry/content/filerepository/CM...

Just a friendly advice: I'm sure you would get less of such replies, if you cited correctly. Just posting two links to be later followed with some vacant synthetic proposals is not a constructive approach. It seems, I'm not the only one who was mislead by this. You need to connect what you propose with the reference from where it originates.

By the way, the article says palladium on carbon (Pd-C), not lead (Pb). And it is a catalytic transfer hydrogenation, which means you don't necessarily need NaBH4. Other hydrogen donors might do. Hydrogen would for sure. Alternatively, you can do either a metal dissolving reduction of the nitrophenol, or use sodium dithionite. You just need to search the literature for the alternatives.

The mononitration of phenol with nitric acid and then separating the isomers is also not an elegant solution. There are better alternatives. Supposedly it is possible to oxidize the nitrosated phenol to the p-nitrophenol and this can be done in a one-pot procedure according to EP0626366 (see US5414148 for the English translation). Such an approach quite cleanly gives p-nitrophenol and in good yields, because the nitrosation has excellent regioselectivity and gives only the monosubstituted product. The procedure in the examples looks quite straightforward and give a good quality product. Of course, you can just nitrosate the phenol to the p-​quinone monoxime and reduce it to p-aminophenol, instead of going trough the p-nitrophenol (essentially what the patent describes, except for skipping the oxidation with HNO3, as is for example described in DOI: 10.5012/bkcs.2010.31.10.3007). However, some member here reported troubles in trying to nirosate phenol, but apparently it can be done by respecting the critical parameters (UTFSE). The p-​quinone monoxime can be reduced by various means, including directly with NaBH4 (without Pd-C, DOI: 10.1021/ja01495a032) or even by such exotic ways as using baker's yeast (DOI: 10.1016/0040-4039(95)00398-V).

HeYBrO - 13-12-2013 at 14:09

My apologies for my haphazard posting, indeed i can see how it wasn't transparent. Also i do understand the difference between Pd/Pb i must of not being paying attention and then i didn't notice.
I corrected it here, is there a way you could replace the old photo with the new as i can't edit it. Thanks for the great resources, i'll check them out once I'm finished posting.

ASA 2.png - 76kB

eidolonicaurum - 5-1-2014 at 01:17

https://www.youtube.com/watch?v=VTLnNWQhSMI&feature=yout...

Oil of wintergreen prep from aspirin.