UrethaneChemist - 20-4-2016 at 08:21
Hello! I am moving and have no use for this glassware any longer. What you see in the pictures are what I'm selling in all. Most if not all are 24/40
fittings with the exception of some of the multiple neck round bottoms and soxhlet extractor which has all the necessary extensions in order to use. I
would like to sell all of it as a bundle if possible as I do not have a lot of time on my hands to ship in all sorts of directions. USA only, no
international thank you.
$500.00 takes it all!+shipping and handling costs (insurance included) which is very reasonable considering there are a few pieces well worth over
150.00-200.00 each.
chemrox - 20-4-2016 at 10:39
Can't you wash it?
j_sum1 - 20-4-2016 at 14:58
There are some nice pieces there.
I presume you are selling to the US.
I'm a wee bit coveting the short path condenser. But the package as a whole is a lot more than I need and shipping internationally would not be worth
either the expense or the importation hassles.
UrethaneChemist - 21-4-2016 at 03:17
@chemrox I could wash it but I simple don't have the time to get all the dust off! What you see is what you get. They will clean up nicely.
JJay - 21-4-2016 at 03:47
I don't see any pieces that I would pay more than $100 for... am I missing something?
arkoma - 21-4-2016 at 07:01
The synthware short path condenser retails for over $200.
*edit* it appears everything is "high end", no chinese stuff. The pressure equalized addition funnels are all north of $100 too.
[Edited on 4-21-2016 by arkoma]
Loptr - 21-4-2016 at 07:02
Glassware can be expensive depending where you get it from. The largest size seems to be around 2L. I am not sure I would pay $500, but some who might
have the cash flow might, but then again, I am not in the market for glassware at this time.
I will say there are some very useful pieces of glass here. It would allow someone to make leaps and bounds over their current abilities that are
limited by their glassware. I am sure they will find a nice home.
UrethaneChemist - 21-4-2016 at 08:46
Wilmad lab glass 5 neck 1 L round bottom $191.87
https://scientific.katsent.com/sci-LG-7390-174-5-neck-round-...
Wilmad labglass soxhlet $296.00
https://www.wilmad-labglass.com/Products/LG-6900-104/
Two examples I could give more if needed. These were bought new, the soxhlet was used two times.
Corning hot plate
UrethaneChemist - 21-4-2016 at 09:59
Corning small hot plate $40.00 + shipping
CaptainPike - 21-4-2016 at 15:47
It's hard to get what some thing's "worth", when you're in a hurry
My meta-x-wife sold his car for something like $1500 to the first guy on craigslist. It was a birthday gift from me and it was pristine!
When I give a gift, I wish to heck there were no strings attached…
bolbol - 22-4-2016 at 17:50
Is the hot plate still available?
Nectarine - 22-4-2016 at 17:58
MAN....
nice stuff
UrethaneChemist - 23-4-2016 at 07:13
Hot plate is still available
bolbol - 23-4-2016 at 11:11
How much to ship to Southern California?
UrethaneChemist - 25-4-2016 at 07:06
ill put it in a priority mail small box, so about 10-15.00 off the top of my head.
Dr.Bob - 25-4-2016 at 16:23
It should fit into a medium flat rate box, with is about $12-13 last time I sent one.
UrethaneChemist - 2-5-2016 at 04:46
hotplate sold
any takers on the glassware?
UrethaneChemist - 2-5-2016 at 07:37
Glassware SOLD, thanks!
careysub - 3-5-2016 at 06:40
In pricing the glassware using Laboy, the Chinese discount glassware vendor, I broke $500 before finishing, I would guess the total cost would be in
the neighborhood of $700.
On the one hand it is used not new, and some deficiencies are noticeable (missing stopcock stems for a separatory funnel; looks like one broken top
joint on a condenser); on the other this is top quality glass.
Are the stopcock replacements easily sourced? I do not know how standard such a thing is.
UrethaneChemist - 3-5-2016 at 07:16
there are some pieces I did not include in the pictures like stopcocks and other miscellaneous pieces. in addition there are also glass mercury
thermometers that will fit in the quick distillation setup.
[Edited on 3-5-2016 by UrethaneChemist]