Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Difficult hydrolysis of an hindered ester
clemi2310
Harmless
*




Posts: 5
Registered: 9-2-2016
Member Is Offline

Mood: No Mood

[*] posted on 8-8-2016 at 07:29
Difficult hydrolysis of an hindered ester


Hello everyone,

I am encountering a serious issue regarding the hydrolysis of an hindered ester.

The initial reaction that works is the BOC substrate in NaOH 10N at 120°C under microwave (see picture), quite harsh conditions but I manage to get the acid after 4 hours.

With the aim of simplifying my synthetic pathway, I wanted to hydrolyse in the same way the substrate already substituted (see picture second line). The reaction occurs but do not go till completion... I don't know why there is such a change between the boc version and the aromatic one.;.

I also tried the methyl ester instead of the ethyl as it should be more reactive, but it remains the same.

I tried conditions of a paper involving LiCl in DMF (anhydrous hydrolysis) but it didn't work.

My options now, are try to displace the equilibrium, test for other conditions (I saw thins with Toluene at 150°C and KOH under microwaves, or tBuOK in DMSO....)

I would like to know you suggestions if you can help me

Thanks by advance

Clémence

HYDROLYSE.png - 119kB
View user's profile View All Posts By User
zed
International Hazard
*****




Posts: 2277
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline

Mood: Semi-repentant Sith Lord

[*] posted on 8-8-2016 at 13:32


Dunno. Might try KOH or LiOH.

Might also try a co-solvent. You would like to hydrolyse that ester. But, your first obstacle might be the water insolubility of your substrate.

It is probable someone here, knows a lot more about this, than I do.







[Edited on 8-8-2016 by zed]
View user's profile View All Posts By User
Praxichys
International Hazard
*****




Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline

Mood: Coprecipitated

[*] posted on 9-8-2016 at 05:22


You might try an appropriate phase transfer catalyst. I can't imagine this substance having appreciable solubility in 10N NaOH.

I would be worried about using tBuOK - you'd end up with a Williamson ether.




View user's profile Visit user's homepage View All Posts By User
AvBaeyer
National Hazard
****




Posts: 644
Registered: 25-2-2014
Location: CA
Member Is Offline

Mood: No Mood

[*] posted on 9-8-2016 at 17:45


I suggest you try lithium hydroxide in THF with a small amount of water. This often works for hydrophobic esters such as yours. Heating under pressure may be necessary if hydrolysis at reflux does not work.

AvB
View user's profile View All Posts By User

  Go To Top