mono
Harmless
Posts: 10
Registered: 16-3-2007
Member Is Offline
Mood: No Mood
|
|
too much palladium in H2 reduction?
Hi,
I was wondering if having added too much palladium (60 % too much) could fail the reduction or be dangerous?
It's an H2 reduction using palladium under 5 bar pressure.
thanks 
[Edited on 26-3-2008 by mono]
Liberty
1a. The condition of being free from restriction or control.
b. The right and power to act, believe, or express oneself in a manner of one\'s own choosing.
c. The condition of being physically and legally free from confinement, servitude, or forced labor.
|
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Certainly adding too much of Pd-C (assuming you used 5% palladium on carbon since you say nothing) would not cause the hydrogenation to fail. It would
only speed it up and that's all.
As far as being dangerous, it only depends on what you did with it. If it was 5% Pd-C it is pretty innocuous, at least if you respect all the
hydrogenation safety rules. The 10% Pd-C is a bit pyrophoric and can ignite the solvent if added to it in air. I always flush with argon first when
using 10% Pd-C, but don't worry at all with the 5% one.
|
|
|
mono
Harmless
Posts: 10
Registered: 16-3-2007
Member Is Offline
Mood: No Mood
|
|
oh sorry, forgot a lot of details.
thanks for helping me
solvent is ethyl acetate.
flushed 3x times with 2 bar Nitrogen.
Using 5% palladium on carbon.
[Edited on 26-3-2008 by mono]
[Edited on 26-3-2008 by mono]
Liberty
1a. The condition of being free from restriction or control.
b. The right and power to act, believe, or express oneself in a manner of one\'s own choosing.
c. The condition of being physically and legally free from confinement, servitude, or forced labor.
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
I've had people tell me that Pd-C which still has some hydrogen on the surface can become pyrophoric when you use filtration to remove it from the
reaction mixture, due to reaction of H2 with oxygen. I've never had it happen though.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
stoichiometric_steve
National Hazard
Posts: 819
Registered: 14-12-2005
Member Is Offline
Mood: satyric
|
|
| Quote: | | Originally posted by vultureI've never had it happen though. |
i did - suddenly, an orange spot appeared in the middle of the filter cake in a buchner funnel and smoke was sucked through the filter. i was
quick-witted enough (took me 5 seconds to realize what was happening, though) to pour some dH2O on the filter cake.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
