ReaktionChamber
Harmless
Posts: 9
Registered: 6-12-2017
Member Is Offline
Mood: No Mood
|
|
Solvent for Potassium synthesis
So I want to perform the potassium synthesis, by the alcohol catalyzed magnesium reduction approach. I already have the alcohol (tert-amyl alcohol)
and the Mg+KOH. I'm now questioning which solvent might be the best to use.
I have some octane, hexane, pentane and several other on hand.
regards
rC
|
|
|
artemov
Hazard to Others
Posts: 181
Registered: 22-8-2018
Member Is Offline
|
|
Hypoallergenic *baby oil? According to nurdrage, in his sodium synthesis series on YouTube.
[Edited on 16-11-2018 by artemov]
|
|
|
12thealchemist
Hazard to Others
Posts: 181
Registered: 1-1-2014
Location: The Isle of Albion
Member Is Offline
Mood: Rare and Earthy
|
|
Hypoallergenic baby oil will be the best that is readily available. You're after a hydrocarbon solvent with a boiling point of at least 180°C;
aromatics are ideally to be avoided. For potassium, you may be able to get away with it, but it's a little risky, and that's for tetralin
(tetrahydronaphthalene).
|
|
|
zed
International Hazard
Posts: 2277
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Yup. We normally think of Aromatic Hydrocarbons, as being inert to Alkali Metals.
But, in this case, our thinking is wrong.
Nurdrage, seems to have failed, using most common solvents.
Found success, utilizing a Walmart Brand of hypoallergenic baby oil.
https://www.youtube.com/watch?v=oiZf-O6vvbE
[Edited on 16-11-2018 by zed]
|
|
|
GrayGhost-
Hazard to Self
Posts: 61
Registered: 31-10-2017
Location: Argentina
Member Is Offline
Mood: No Mood
|
|
Hi, my question is, what if you use paraffin wax have boiling point more 370°C ?
|
|
|
j_sum1
Administrator
Posts: 6219
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
I recall in the potassium thread some people having some success with paraffin wax. I also seem to recall Nurdrage experimenting with various
solvents and mentioning differences between sodium and potassium.
|
|
|
12thealchemist
Hazard to Others
Posts: 181
Registered: 1-1-2014
Location: The Isle of Albion
Member Is Offline
Mood: Rare and Earthy
|
|
The problem with paraffin/candle wax was that it is solid at room temperature. This makes recovery of the potassium metal extremely difficult, and so
is a poor choice of solvent. Also, NurdRage only ever got "potassium sand" - tiny balls of potassium, never large globules using wax as a solvent.
The main difference between sodium and potassium is time. Sodium is about 25x longer than potassium (give or take), and so you'll need to react it for
at least 24 hours. As a result of this, aromatic solvents like tetralin are degraded into tar, and destroy all the yield. It's possible to use
tetralin for potassium, but only because the reaction is relatively so fast. Additional alcohol catalyst must be added, however, to clean the
potassium of the tar formed.
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Kerosene lamp oil was the solvent that ended up working for me. Mineral oil was a bit annoying to deal with - despite my attempts to dry it, something
would always prevent the reaction from even starting. Also, it bubbled and foamed up into the condenser.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
I used lamp oil as well. Mine had a blue dye, so I "decolorized" it by heating with hydrogen peroxide (IIRC). I succeeded in making K spheres, but
only a few mm in diameter. Coalescence was my problem. I bought tetralin to try to solve this but that reaction failed because my hotplate overheated,
and I haven't tried it again since. Also nobody told me how overpowering an odor tetralin has!
As I always say whenever these threads come up, go read the main potassium thread. It's incredibly long, but I bet every question you have is answered
in it. If you must skim, look for posts with pictures since those usually include actual results.
|
|
|
12thealchemist
Hazard to Others
Posts: 181
Registered: 1-1-2014
Location: The Isle of Albion
Member Is Offline
Mood: Rare and Earthy
|
|
Quote: Originally posted by MrHomeScientist  | | As I always say whenever these threads come up, go read the main potassium thread. It's incredibly long, but I bet every question you have is answered
in it. If you must skim, look for posts with pictures since those usually include actual results. |
It wasn't until today that I read the forum guidelines (Nicodem's current signature), and encountered the concept of cross-posting. However, I feel
this rather short thread may be of great help follow your comment, MrHomeScientist
http://www.sciencemadness.org/talk/viewthread.php?tid=104576
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Excellent summary! That included a lot of theoretical discussion I don't recall seeing in the thread.
I made my own summary somewhere in the middle of the thread, but good luck finding it  Mine was more focused towards experimental concerns as I prepared to try it myself. I definitely want to try this again using tetralin,
but I really don't want to use it without a fume hood. I also probably need a better heating setup than the sand bath that damaged my hot plate.
|
|
|
12thealchemist
Hazard to Others
Posts: 181
Registered: 1-1-2014
Location: The Isle of Albion
Member Is Offline
Mood: Rare and Earthy
|
|
My aim was to condense everything that was known about the reaction into a single document, including the recent work by NurdRage and my own thoughts
on the reaction.
I do remember finding your summary; I went through the entire thread picking out all the relevant information. Were there any experimental details
that you would include that I've missed?
And on a purely curious note, what does tetralin smell like?
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
