VSEPR_VOID
National Hazard
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
Anti-Markovnikov Hydrobromation
I am doing research into the Anti-Markovnikov hydrobromation of methacrylic acid.
Does anyone have a link, source, or reference to a protocol that goes over something simular? Anything relating to alkenes and Anti-Markovnikov
hydrobromation would be useful.
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|
|
ninhydric1
Hazard to Others
Posts: 345
Registered: 21-4-2017
Location: Western US
Member Is Offline
Mood: Bleached
|
|
The classic textbook method for an Anti-Markovnikov HBr addition is adding a catalytic amount of an organic peroxide (i.e. benzoyl peroxide, an OTC
organic peroxide used for acne treatment), or to irradiate the reaction mixture with UV light. This would work with methacrylic acid, no?
The philosophy of one century is the common sense of the next.
|
|
|
clearly_not_atara
International Hazard
Posts: 2692
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
For methacrylic acid the hydrobromination is always anti-Markovnikov because of the EWG, so no peroxides are required. Instead, just gas HBr through
it in acetone or something.
[Edited on 04-20-1969 by clearly_not_atara]
|
|
|
VSEPR_VOID
National Hazard
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
Can you give me a link to further reading about this? I was doing some more research: Google Scholar led me to some patents about using HBr gas and
chloroform.
This is very good information
3-Bromo-2-methylpropionic acid
A. 3-Bromo-2-methylpropionic acid
86 ml (1.01 moles) of methacrylic acid are dissolved in 80 ml of chloroform and hydrogen bromide is bubbled into the solution at -10° C. under
stirring. After the absorption of the calculated quantity of gaseous hydrogen bromide, the solution is left to stand at 0° C. for 12 hours. The
chloroform is evaporated and the residue is distilled in vacuo.
164.8 g (97.3%) of 3-bromo-2-methylpropionyl chloride are obtained, b.p. 101°-104° C./7 mm Hg. nD 24.5 =1.4753.
From <https://patents.google.com/patent/US4332725A/en>
3-bromo-2-methylpropionic acid 6 HBr gas was bubbled for 2 h in a solution of metacrylic acid (5 ml, 58 mM) at room temperature. The reaction mixture
was purified by Kugelrhor distillation under reduced pressure to afford the title compound as a colourless oil; (70%)
From <https://sci-hub.tw/https://onlinelibrary.wiley.com/doi/abs/10.1002/psc.1201>
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|
|
Metacelsus
International Hazard
Posts: 2531
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Yes, I think chloroform would be better than acetone, since acetone might give aldol side products. Dichloromethane should also work. I would avoid
ether solvents since HBr might cleave them.
|
|
|
VSEPR_VOID
National Hazard
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
Tetrachloroethane would work as well. It has a higher bp so pruification by evaporation of the solvent would be more difficult.
Chloroform is easy to make for the amateur so it would be a better choice.
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
