Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Which one is correct?
camurgo
Harmless
*




Posts: 14
Registered: 25-11-2017
Member Is Offline

Mood: No Mood

[*] posted on 7-8-2019 at 06:35
Which one is correct?


Hi everyone.

On the subject of mixing FeS and H2SO4 I found resources describing two different equations:

a) FeS + H2SO4 → FeSO4 + H2S

b) FeS + H2SO4 → FeO + H2O + SO2

Which one is correct? Or, is it possible that both are correct depending how you mix the reagents?

Thank you.

[Edited on 7-8-2019 by camurgo]
View user's profile View All Posts By User
Tsjerk
International Hazard
*****




Posts: 3022
Registered: 20-4-2005
Location: Netherlands
Member Is Offline

Mood: Mood

[*] posted on 7-8-2019 at 07:38


Sulfuric acid becomes oxidizing at higher temperatures, so I guess the second reaction happens at higher temperatures. I expect the Fe(II) to get oxidized to Fe(III) though.
View user's profile View All Posts By User
icelake
Harmless
*




Posts: 48
Registered: 9-10-2017
Member Is Offline

Mood: No Mood

[*] posted on 7-8-2019 at 07:41


The first one is definitely correct.

There is a missing S atom in your second equation, but it could be correct.

https://pubs.acs.org/doi/abs/10.1021/ie990717z

H2S + H2SO4 → S + SO2 + 2H2O

[Edited on 7-8-2019 by icelake]

[Edited on 7-8-2019 by icelake]
View user's profile View All Posts By User
camurgo
Harmless
*




Posts: 14
Registered: 25-11-2017
Member Is Offline

Mood: No Mood

[*] posted on 7-8-2019 at 07:54


Thank you all. I didn't catch the missing S. And just now I found yet another one. The last one I promise:

2FeS + 10H2SO4 → Fe2(SO4)3 + 9SO2 + 10H2O

This one is balanced. Would you know if this is a possible actual reaction?

Thank you.



[Edited on 7-8-2019 by camurgo]
View user's profile View All Posts By User
Tsjerk
International Hazard
*****




Posts: 3022
Registered: 20-4-2005
Location: Netherlands
Member Is Offline

Mood: Mood

[*] posted on 7-8-2019 at 08:22


Hmm, the products look fine, and it looks balanced... 2FeS is losing 2 x (1+6) electrons, sulfate is gaining 7 x 2 electrons.
View user's profile View All Posts By User
AJKOER
Radically Dubious
*****




Posts: 3026
Registered: 7-5-2011
Member Is Offline

Mood: No Mood

[*] posted on 7-8-2019 at 12:38


Your current balanced the equation exercise has only partial resemblance to the 'actual' advanced chemistry. But if you want real, here is a related work 'Corrosion Mechanism of Nickel in Hot, Concentrated H2SO4' in Journal of The Electrochemical Society, 147 (10) 3637-3646 (2000) 3637 at http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.102...

The first presumed reaction is presented in reaction system [3]:

Anode: Ni --> Ni(2+) + 2 e-

Cathode: 4 H2SO4 + 2 e- --> SO4(2-) + SO2 + 2 HSO4- + 2 H3O(+) [3]

Total: Ni + 4 H2SO4 --> NiSO4 + SO2 + 2 HSO4- + 2 H3O(+)

which turns out to be an inaccurate rendition as, to quote, "composition of the various solid corrosion products demonstrates that other possible reduction products include sulfide ions and elemental sulfur."

The work proceeds on to depicted in Fig. 10 four mechanism detailed in reaction systems [8] to [14].

In the current context, one could substitute for Ni with Fe(2+) and for Ni(2+) with Fe(3+).

Interestingly, Eq [8] cites H2S formation and Eq[14] cites sulfur, so to answer your question "Would you know if this is a possible actual reaction?" the answer is yes, in part, but a bit too advanced to explain it simply, in my humble opinion.

Also a comment relating to a comparison between nickel and iron, to quote from the source:

"Since nickel has a similar response to anodic polarization in concentrated H2SO4 as does iron in its well-known sulfation stage [45,46], and forms a similar sulfate salt film, it is reasonable to postulate that nickel has a similar rate-determining step as does iron; the convective mass transfer of the metal cation from the saturated metal sulfate layer."
---------------------------------------

The good news is your 'teacher', I suspect, is not a real chemistry professional, and therefore, likely clueless on the real science, and what you are doing is a simple balance the equation game.

[Edited on 8-8-2019 by AJKOER]
View user's profile View All Posts By User
camurgo
Harmless
*




Posts: 14
Registered: 25-11-2017
Member Is Offline

Mood: No Mood

[*] posted on 9-8-2019 at 17:41


Thank you for the answer. I'll be trying to wrap my mind around this.
View user's profile View All Posts By User
Sulaiman
International Hazard
*****




Posts: 3554
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline


[*] posted on 9-8-2019 at 18:52


@AJKOER
NoDoc.jpg - 29kB




CAUTION : Hobby Chemist, not Professional or even Amateur
View user's profile View All Posts By User
icelake
Harmless
*




Posts: 48
Registered: 9-10-2017
Member Is Offline

Mood: No Mood

[*] posted on 9-8-2019 at 22:47


http://jes.ecsdl.org/content/147/10/3637.full.pdf+html

correct doi: doi: 10.1149/1.1393952
View user's profile View All Posts By User

  Go To Top