| Pages:
1
2
3
4 |
wxyz
Harmless
Posts: 19
Registered: 13-4-2010
Member Is Offline
Mood: No Mood
|
|
what do you use to store iodine/bromine
I once had bottle of 25g iodine from some chemical manufacturer. After about 10 or 15 years the iodine totally destroyed the cap (it was plastic,
maybe bakelite). Since then I have tried storing the iodine in various jars, test tubes with rubber stoppers, or finally glass bottle with ground
glass stopper, possibly enclosed in multiple ziplock bags. It has either destroyed the cap or leaked out of all of the above. Now I have it in a glass
bottle with a ground glass stopper AND vacuum grease on the stopper AND I store it in the mini fridge in my "lab". The vacuum grease has turned brown
but at least I don't smell iodine around the jar anymore. So that is a somewhat happy solution.
I am planning on making some bromine soon and I imagine I will have the same problems storing it long term as well.
Does anybody have suggestions for long term storage of these halogens?
|
|
|
1281371269
Hazard to Others
Posts: 312
Registered: 15-5-2009
Member Is Offline
|
|
Bromine is awful. I have a tiny amount, which I keep in a test tube with a ground glass stopper wrapped with teflon tape. I've then got that inside a
closed plastic fizzy drinks bottle which is inside my fume cupboard (the fan itself is only on when I'm in the lab, but it means that the gases can
vent to the air outside).
I also got noticeable amounts of rust on all the metal things in the area (bad, because the lab is in a garage which also houses my lathe and
woodturning tools), so I spent some time removing all the rust with steel wool and spraying everything with WD40.
|
|
|
Lambda-Eyde
National Hazard
Posts: 857
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
I store my ~25 ml of bromine in one of these, the one on the left with a red cap. The red caps are far more durable than the standard blue ones, which are made of PP. The red ones are
melamine with a ETFE pouring ring and PTFE liner IIRC.
It still smells, though. Storing the bottle in a tightly closed plastic box filled with sodium thiosulfate might solve that problem as well as make
storage more secure. Alternatively, you could store it in a refrigerator or fridge, but only if you have one dedicated to lab use.
[Edited on 6-2-2011 by Lambda-Eyde]
|
|
|
wxyz
Harmless
Posts: 19
Registered: 13-4-2010
Member Is Offline
Mood: No Mood
|
|
Thanks for the pointer to the bottles. And I like that tightly closed box with sodium thiosulfate idea. Think I will give that a try.
Actually,.... this reminds that I have vacuum desiccator that I can't use for vacuum work anymore because of some chipping on the glass. I could but
the Br and the I in there over the NaS203.
|
|
|
Sedit
International Hazard
Posts: 1939
Registered: 23-11-2008
Member Is Offline
Mood: Manic Expressive
|
|
Iodine has always been a pain in the ass to me and I would assume Bromine to be just as bad. With the iodine I find storing it underwater to help alot
so that the cap does not corrode.
Knowledge is useless to useless people...
"I see a lot of patterns in our behavior as a nation that parallel a lot of other historical processes. The fall of Rome, the fall of Germany — the
fall of the ruling country, the people who think they can do whatever they want without anybody else's consent. I've seen this story
before."~Maynard James Keenan
|
|
|
hkparker
National Hazard
Posts: 601
Registered: 15-10-2010
Location: California, United States
Member Is Offline
Mood: No Mood
|
|
I store Iodine in a amber glass jar with a plastic/teflon lined cap. The inside of the cap is purple now but I've never had a leak. I would imagine
ground glass would work very well as well though.
Bromine is crazy. I am able to store it, but after much trial and error. I keep mine in a glass ampule like this <a
href="http://www.sks-science.com/images/176772LRG.jpg" target="tab">these</a>. Just pour it in and melt the top closed with a torch, and
break at the score line when you need to open it. Ive also heard of it being safely stored under a layer of conc. sulfuric acid in a jar (to keep it
from fuming I guess as well as dehydrate it if theres any water in it).
My YouTube Channel
"Nothing is too wonderful to be true if it be consistent with the laws of nature." -Michael Faraday
|
|
|
wxyz
Harmless
Posts: 19
Registered: 13-4-2010
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by hkparker  | I store Iodine in a amber glass jar with a plastic/teflon lined cap. The inside of the cap is purple now but I've never had a leak. I would imagine
ground glass would work very well as well though.
|
I thought the ground glass would be the final solution too, but at least with ground glass I had, which admittedly was not top quality, it
managed to leak out. I think with higher quality ground glass (better tolerances ground finer) it would leak out much less. But like I said, adding
vacuum grease does stop it cold.
|
|
|
smuv
National Hazard
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
I have seen commercial bromine sold in the container Lambda-Eyde referenced. The bromine was stored in a cabinet on its own, and the area around it
was not noticeably corroded. I think this would be the best way to go.
[Edited on 2-6-2011 by smuv]
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
I've had no problem with Iodine using teflon lined silicone septa on vials. It's also pretty easy to seal into ampoules--but do it outside, as any
iodine stuck in the neck will vaporize when you take a torch to it.
I don't yet have any bromine, but I would store it in multiple small ampoules, to break open as needed. Just make sure they're borosilicate.
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
I have stored iodine in standard glass medicine bottles and plastic containers without any problems.
Smells yummy!
This is a strip of lithium, which should be stored under inert gas or oil. But I figured I'd just stick it in the bottle as I'm not particularly
bothered about having a shiny single gram quantity of lithium. The metal is still active, but is now crispier than a crisp due to it reacting with the
oxygen left in the bottle - the thread is taped shut.
This is an example of where things start getting difficult. It's a supplier bottle of anhydrous AlCl3. Without opening it, I could already see it was
rotting it's own label. Moisture was getting around the seal, coming into contact with the AlCl3 and this was then releasing hydrogen chloride gas.
Gradually. If it's anhydrous, tape it. Better yet, reform in situ just prior to use, as it's very unlikely it'll still be in the state it was bottled
under. Even Sigma's Sure Seal septums leak and solvents bottled in them will be redistilled for critical work.
The above bottle would have benefited from a wrap with this, yet I suppose they look down on such solutions, whilst their bottles leak. In the example
above, it is particularly bad as the contents decompose on contact with water, and contaminate the supposedly dry lewis acid with bronsted lowry acid,
which will then catalyse the lewis acid into doing things it wouldn't normally.
[Edited on 7-2-2011 by peach]
|
|
|
mr.crow
National Hazard
Posts: 884
Registered: 9-9-2009
Location: Canada
Member Is Offline
Mood: 0xFF
|
|
Mmm beautiful iodine 
I keep my home made sample of iodine in a test tube with a standard plastic cap (PE or PP). I glued a penny to the top followed by metal duct tape.
The plastic threads haven't been discolored at all after a few years. Of course the top of the cap is black.
I stopped my sodium from bubbling by covering the entire cap with metal duct tape followed by wrapping the outside. Sneak past that, bloody water! Has
anyone else used this tape? Never had much luck with teflon tape on the threads.
Double, double toil and trouble; Fire burn, and caldron bubble
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
You need to put a good few wraps on. It's designed for sealing close fitting parallel pipe threads, whereas the bottles have much coarser and lower
tolerance threads.
{edit}Oh, the Iodine is in a bottle marked 5, which would be Polypropylene. It's brown because the plastic is amber tainted.
[Edited on 7-2-2011 by peach]
|
|
|
mr.crow
National Hazard
Posts: 884
Registered: 9-9-2009
Location: Canada
Member Is Offline
Mood: 0xFF
|
|
I've never had luck wrapping pipes either. It always leaks! I used the thicker gas line tape as per your recommendation in another thread on the pipes
and it was fine.
Double, double toil and trouble; Fire burn, and caldron bubble
|
|
|
a_bab
Hazard to Others
Posts: 458
Registered: 15-9-2002
Member Is Offline
Mood: Angry !!!!!111111...2?!
|
|
@Peach: AlCl3 and many others such chems do have an expiry date and this is for an obvious reason. Ethyl ether for instance is meant to be used
whithin 6 months from manufacturing date otherwise it'll peroxidize. They don't take any risk when it comes to selling stuff. Shortening a validity
date for a certain chem by half could mean doubling the sales. I guess the modern chemists lost his skill when it comes to purifying organic solvents,
redistiling them and such. There are many old books describing these methods in detail.
For the underground chemist an old half oxidized sodium bottle, or some wet, acid RP in a rusty can are simply treasures.
I read in shock on one of my PE Merk bottles with 30% H2O2 that "after 5 years from manufacturing date the bottle may become brittle". Been 15 years
now and it's still fine.
All the chemical bottles are made to hold for a certain time, then they "expire" and should be recycled. Ecologicaly. And for a glass bottle it all
begins and ends with the cap. The better the cap is, the longer the warranty. As a matter of fact most of our chems are "expired" and "given away".
Some were tossed away waiting to be scavenged by us. Ebay is just such a place. Just think about it where you got "yor chemz" from and how. They
should have been properly disposed of long ago.
The absolute best solution is vialing. Some chems simply cannot be stored otherwise (think Cs).
As about iodine storing besides vialing, the best bet is PTFE lined cap with amber bottle. Bromine is far worse, as it's way more volatile and more
corrosive.
[Edited on 7-2-2011 by a_bab]
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
I realise a number of chemicals are contaminated or ruined overtime, those that are particularly sensitive to the atmosphere or reactive with regards
to the container.
Using AlCl3 as an example, since most people here don't have a Sigma account and so can't get the Sure Seals, and don't have the gas handling
equipment and cannula to carry out an anhydrous transfer, it may be better for such things to either be dried or generated IN the flask it's about to
be used in - so it can be used without ever having to open said flask to the atmosphere. Even if you have Sure Seal bottles, they leak - Sigma
actually have a page on the site about the leakage rate.
Lifespan depends entirely on what is in it and what you want from it. As you've point out, your container is over 15 years old and fine. There are a
number of less reactive things that are going to keep indefinitely in terms of at home use, even when stored in fairly basic conditions. I'm thinking
of the kinds of things you'd find in a GCSE or A-level chemistry lab, where there is no specialised handling equipment or critical purity involved.
I can see the use of PTFE liners, but I don't see why iodine is so needing of one. If you've got them, use them. If not, I don't think you need to buy
a pack just for iodine. Sulphuric is more of a storage problem.
Iodine can be sublimated and sulphuric can be redistilled without too much trouble at home. Again, pretty much no one here has the ability to work
under truly anhydrous conditions, so trying to store anhydrous solvents is something of a waste of time.
Solvent stills are still very much in use. In fact, things have moved on to solvent purifications systems using alumina. Even today, people will buy
dry solvents and then redistill them as they need them, realising it will have picked up moisture. They opt for the predried things to ease the
redistillation or drying.
You're correct that ampoules are the only true way to ensure something remains as bottled. I'm probably one of the few people here that sits around
with his beer watching videos of students in Russia pulling them by hand. But if the thing in them is in anyway sensitive to the atmosphere, you need
some decent gear to get the material out and into the experiment without it being contaminated as soon as the ampoule is opened.
The solvent still room at Cambridge University, showing that stills are not only in use, but now have their own room - the photo is from Dan's blog,
Curly Arrow
<img src="http://photos1.blogger.com/x/blogger2/4300/535534669109052/1600/433308/for%20dan%20-%2007.jpg" width="800" />
A sodium free solvent purification system dries and deoxygenates solvents on demand under an inert blanket, each tap is for a different
solvent
<!-- bfesser_edit_tag -->[<a href="u2u.php?action=send&username=bfesser">bfesser</a>: reduced
image size]
[Edited on 21.2.14 by bfesser]
|
|
|
Arthur Dent
National Hazard
Posts: 553
Registered: 22-10-2010
Member Is Offline
Mood: entropic
|
|
For iodine and bromine, would a glass bottle with a teflon lined cap be better if it was sealed with a few layers of wax?
I've noticed that some hygroscopic chems often have a wax seal over the bottle cap. Would parrafin be good to prevent the iodine and bromine from
leaking out? Or will it eat through the wax too?
The idea of empty ampules for bromine is probably the best bet to keep it from leaking. But since iodine is less aggressive, I was thinking of using a
wax seal to keep it in a bottle.
Robert
[Edited on 7-2-2011 by Arthur Dent]
--- Art is making something out of nothing and selling it. - Frank Zappa ---
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
You're not going to have problems with iodine if the cap liner makes a half decent seal or you tape the threads.
Putting wax on it, I suspect you're more likely to end up with problems due to bits of wax ending up in the iodine as you seal and open the bottles.
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by peach | | I'm probably one of the few people here that sits around with his beer watching videos of students in Russia pulling them by hand.
|
Glad I'm not the only one...
|
|
|
Panache
International Hazard
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
store it like i do, at minus 80C, the bromine crystals tend to be quite sedate, i have almost a full 1L bottle stored this way that previously
required a new teflon insert and cap every other week at RT. For some reason the world is flush with cheap ultra-lows atm, you just need to have your
feelers out. Try simply cold calling pathology labs, they routinely replace perfectly fine working ones because of protocol.
once you're used to the having one around they can tend to drive your interest into the cryo-zone though and contrary to popular myth they don't suck
much power really.
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
I keep my iodine in a FEP bottle at -20C and it has done absolutely nothing of interest over years. No leaking, no secondary bottle needed, nothing.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
redox
Hazard to Others
Posts: 268
Registered: 22-2-2011
Location: The Land of Milk and Honey
Member Is Offline
Mood: Chalcogenetic
|
|
My iodine is stored slightly moist in a regular plastic container. The plastic is fine, but stained intense purple.
|
|
|
thethule
Harmless
Posts: 9
Registered: 23-4-2011
Member Is Offline
Mood: No Mood
|
|
Storing 100g of iodine crystals at room temp?
Hi guys, i have a nice element collection going, but the 100g of Iodine i put in a screw top jam jar last year has pretty much eroded the metal top
and is slowly escaping into the surrounding element "cubicles" (i have removed the others for now). I'm about to buy another 100g (i live in the UK,
perfectly legal) and was wondering if you guys had a link to a glass jar i could buy to safely keep it as contained as I can be. It has to be room
temp ideally as i have em on display.
Maybe a sealed ampoule would be a better idea? I'm toying with buying some long borosilicate tubes and attempting to make my own. Is that a viable
solution? Will the Iodine survive while im heating the top end of the tube to soften and seal it? Is there any chance of the ampoule shattering if the
pressure inside gets too high from sublimated iodine?
I did a search btw, but the links to jars on the article i found in this forum are dead.
Thanks for reading
|
|
|
bob800
Hazard to Others
Posts: 240
Registered: 28-7-2010
Member Is Offline
Mood: No Mood
|
|
Please use the forum search engine before asking. Here's a thread on this question:
https://www.sciencemadness.org/whisper/viewthread.php?tid=15...
|
|
|
thethule
Harmless
Posts: 9
Registered: 23-4-2011
Member Is Offline
Mood: No Mood
|
|
Just so you know, i DID do a search, but didnt come across that post. But thanks for the link
I would still like any advice on the ampoule question if anyone has any.
|
|
|
bob800
Hazard to Others
Posts: 240
Registered: 28-7-2010
Member Is Offline
Mood: No Mood
|
|
I don't know if this answers your question, but here's another thread on ampoule sealing:
https://www.sciencemadness.org/whisper/viewthread.php?tid=25...
|
|
|
| Pages:
1
2
3
4 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
