Draeger
Hazard to Others
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
Zn + technical HCl = red precipitate?! Selenium?
So, a few days ago I decided to make some ZnCl2. I mixed the stoichiometric amounts and let it react. I smelt heavy metal hydrides, but I was told
there wouldn't be much produced, so I just put plastic wrap over the top and let it stand.
Now, a few days later, I noticed a tiny metal mirror, which is hopefully just zinc. Some zinc remained, so I added a bit more HCl.
Well, a few days later there's this red precipitate.
Here's a picture:
Could it be selenium, or is it just copper?
[Edited on 25-7-2020 by Draeger]
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
|
RogueRose
International Hazard
Posts: 1585
Registered: 16-6-2014
Member Is Offline
|
|
It looks like copper to my. I found that zinc is excellent at dissolving metals and I suspect that is what is in there. If it was a zinc alloy, it
might have been mixed with aluminum as well as I have many zinc alloys that have both Al and Cu.
|
|
|
Draeger
Hazard to Others
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
Quote: Originally posted by RogueRose  | | It looks like copper to my. I found that zinc is excellent at dissolving metals and I suspect that is what is in there. If it was a zinc alloy, it
might have been mixed with aluminum as well as I have many zinc alloys that have both Al and Cu. |
My zinc has 99,8% purity, so I doubt it would precipitate that much copper. Maybe it's the HCl?
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
|
Tsjerk
International Hazard
Posts: 3022
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
How do you know how much is there? I highly doubt this is from your HCl. Is it colorless?
|
|
|
Draeger
Hazard to Others
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
I can see how much is there by just looking. The entire ground of the beaker is covered, with some thickness. And it can only be from the HCl, since
there's only 200mg of impurity in the zinc if Onyxmet is to be trusted. The HCl is pretty noticeably green.
Edit: I didn't look correctly. The precipitate is very thin. Maybe it is the 200mg.
Edit: fixed number
[Edited on 25-7-2020 by Draeger]
[Edited on 25-7-2020 by Draeger]
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
|
CharlieA
National Hazard
Posts: 645
Registered: 11-8-2015
Location: Missouri, USA
Member Is Offline
Mood: No Mood
|
|
Looks can be deceiving...
|
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
