sternman318
Hazard to Others
Posts: 121
Registered: 21-4-2011
Member Is Offline
Mood: No Mood
|
|
Cheap source for platinum electrode
I am looking to synthesize sulfuric acid via the electrolysis of CuSO4, but it looks like the only viable anode for this is platinum- which obviously
isn't cheap. Have you guys found any cheap sources?
|
|
|
bob800
Hazard to Others
Posts: 240
Registered: 28-7-2010
Member Is Offline
Mood: No Mood
|
|
Carbon\graphite rods work (which you can easily extract from old dry cells), although they will quickly erode. However, the C particles don't really
interfere and you can filter them out.
Here's a video using C as anode and Cu as cathode:
http://www.youtube.com/watch?v=5dUSF9Gl0xE
[Edited on 21-4-2011 by bob800]
|
|
|
sternman318
Hazard to Others
Posts: 121
Registered: 21-4-2011
Member Is Offline
Mood: No Mood
|
|
I've got a pencil cookin' away! haha. I had seen that video ( it actually sparked this 'quest'), but had spent my time looking for platinum electrodes
or other anodes, instead of just messing with an easily found one. Should I make some sulfuric acid, and dehydrate some sugar, could I not then make
an electrode out of my carbon worm? Are there carbon electrodes that resist decay?
|
|
|
bob800
Hazard to Others
Posts: 240
Registered: 28-7-2010
Member Is Offline
Mood: No Mood
|
|
I think that would erode even more, but you could try it!  There are carbon
electrodes that resist decay, but they are not cheap! It's called "glassy
carbon", and it's quite useful for these types of experiments.
Here's a thread on using glassy carbon in chlorate cells:
https://www.sciencemadness.org/whisper/viewthread.php?tid=15...
Personally, I would just use a carbon rod from a AA dry cell. I did this before and it worked fine after I filtered the carbon particles.
[Edited on 22-4-2011 by bob800]
|
|
|
#maverick#
Hazard to Others
Posts: 209
Registered: 7-4-2011
Member Is Offline
Mood: hybridised
|
|
i have a glossy type carbon electrode that i got for free if you wanna try it, if i can find it lol
[Edited on 22-4-2011 by #maverick#]
|
|
|
redox
Hazard to Others
Posts: 268
Registered: 22-2-2011
Location: The Land of Milk and Honey
Member Is Offline
Mood: Chalcogenetic
|
|
On ebay (last time I checked) there is a dealer selling lengths of platinum wire for $1.75 per inch. You would only need a few inches for your
electrolysis. Check him out- his name is "mfg_answers."
|
|
|
rollercoaster158
Harmless
Posts: 34
Registered: 21-4-2012
Location: Looking through your window
Member Is Offline
Mood: Compiling...
|
|
It may be $1.75 an inch, but the wire's .003 inches in diameter!
|
|
|
dann2
International Hazard
Posts: 1523
Registered: 31-1-2007
Member Is Offline
Mood: No Mood
|
|
A flea's dildo?
|
|
|
barley81
Hazard to Others
Posts: 481
Registered: 9-5-2011
Member Is Offline
Mood: No Mood
|
|
Too big for that.
|
|
|
j_sum1
Administrator
Posts: 6220
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
Has anyone had any success with Pt plated jewellery as an anode?
|
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
No, I haven't tried. But since I'm thinking about it, this is where I bought mine last time:
http://www.ebay.com/itm/1-gram-Platinum-Bar-Secondary-Market...
The key is to get them from the "secondary market". They have physical blemishes, etc. It's like junk silver, except it's platinum, and probably the
closest to spot price that people can just buy. Right now they're around $50.
For the larger sizes (5g) it is probably cheaper to get them directly from Apmex:
http://www.apmex.com/product/23982/5-gram-platinum-bar-secon...
Those are around $200 right now.
PS: I know it's a 4-year-old thread.
[Edited on 12-18-2014 by WGTR]
|
|
|
j_sum1
Administrator
Posts: 6220
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
I ask because I came across a Pt plated bracelet that was made of large (ugly) coin-sized discs. It was only five bucks.
The danger of course is that it would only take one blemish in the presumably thin surface (or a drill hole) to expose the substrate and then any
electrolysis is effectively contaminated and the anode destroyed in short order. Still, it might be worth a try.
And, yes, I realise it is a four year old thread too. The question has come up periodically but I couldn't find a thread where someone had actually
tried and reported success. If there are no responses, I might have to be the person to attempt it.
My main application is electrolysis of CuSO4 to make sulfuric acid. The carbon electrodes I have tried erode too quickly. My attempt at making a
graphite substrate lead dioxide anode had a really poor surface. I must try that again some time though. I burned out a MMO anode -- I mistakenly
thought it was up to the task. I was hoping not to have to shell out the dollars for Pt on titanium mesh.
I do have gold leaf however. I could lay it over a glass rod and try that. Or is Au incompatible with sulfuric acid electrolysis?
|
|
|
jock88
National Hazard
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
Has anyone tried magnetite
|
|
|
TGT
Harmless
Posts: 46
Registered: 9-11-2014
Member Is Offline
Mood: No Mood
|
|
Anyone know if the inside platters of a hard drive are platinum plated, and if so can they be used or is the platinum plating too thin?
TGT
|
|
|
froot
Hazard to Others
Posts: 347
Registered: 23-10-2003
Location: South Africa
Member Is Offline
Mood: refluxed
|
|
Drop one in HCl and see where on the platter the substrate metal reacts.
We salute the improvement of the human genome by honoring those who remove themselves from it.
Of necessity, this honor is generally bestowed posthumously. - www.darwinawards.com |
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
