vinothan23
Harmless
Posts: 13
Registered: 8-7-2011
Member Is Offline
Mood: No Mood
|
|
seperation of Cr2O3 and Al2O3
I have a mixture of Cr2O3 and Al2O3, actually it's a catalyst which was prepared by co precipitation method. I need to seperate it out.
Can anyone suggest method or idea?
|
|
|
Cloner
Hazard to Others
Posts: 150
Registered: 7-12-2004
Member Is Offline
Mood: apocalyptic
|
|
Cr2O3 is acid soluble, Al2O3 only very sparsely.
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Both Cr2O3 and Al2O3 are very inert when they are calcined. Cr2O3 and Al2O3 are absolutely insoluble in acids when they are calcined, they are more
like SiO2.
Only freshly precipitated and non-calcined material can be dissolved in acid.
Separating the two will be very difficult. The only thing I can imagine is dissolving in strong base (or molten base if the material is calcined) and
then oxidizing the chromium to the +6 oxidation state. Then by adding excess acid and then adding ammonia you can precipitate the Al as Al(OH)3 while
the hexavalent chromium remains in solution.
Then you need to add acid and reduce the chromium to trivalent again and then add ammonia to precipitate the Cr as Cr(OH)3.
It's a long way and involves a lot of steps and other chemicals. Probably it's not worth the hassle when done on a small scale.
|
|
|
LanthanumK
Hazard to Others
Posts: 298
Registered: 20-5-2011
Location: New Jersey
Member Is Offline
Mood: No Mood
|
|
You can find out whether it is calcined by placing it in HCl and seeing if the color of the acid changes. If it does not, then the material is
calcined.
In woelen's method, hydrogen peroxide can be used as the oxidant in a non-molten base situation. (http://www.chemguide.co.uk/inorganic/transition/chromium.htm...)
hibernating...
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Try fusion with bisulphate or conc. H2SO4+solid (NH4)2SO4 to effect dissolution. Then what woelen said.
But it's worth wondering whether this [separation] is really worth doing: chromium salts aren't that expensive...
I also wonder if differences in solubility between their alums (potassium or ammonium double sulphates - (NH4,K)(Al, Cr)(SO4)2.12H2O)
might be exploited here: fractionated crystallisation.
[Edited on 8-7-2011 by blogfast25]
|
|
|
vinothan23
Harmless
Posts: 13
Registered: 8-7-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by woelen  | Both Cr2O3 and Al2O3 are very inert when they are calcined. Cr2O3 and Al2O3 are absolutely insoluble in acids when they are calcined, they are more
like SiO2.
Only freshly precipitated and non-calcined material can be dissolved in acid.
Separating the two will be very difficult. The only thing I can imagine is dissolving in strong base (or molten base if the material is calcined) and
then oxidizing the chromium to the +6 oxidation state. Then by adding excess acid and then adding ammonia you can precipitate the Al as Al(OH)3 while
the hexavalent chromium remains in solution.
Then you need to add acid and reduce the chromium to trivalent again and then add ammonia to precipitate the Cr as Cr(OH)3.
It's a long way and involves a lot of steps and other chemicals. Probably it's not worth the hassle when done on a small scale.
|
|
|
|
vinothan23
Harmless
Posts: 13
Registered: 8-7-2011
Member Is Offline
Mood: No Mood
|
|
Thanks woelen for your highly useful post. As you said it is calcined material only.
In one more mixture which is also a catalyst containing Cr2O3, Al2O3, ZnO. It is a calcined and fluorinated(may be in the form of Cr2O3, CrF3, CrOF,
Al2O3, AlF3, AlOF or the mixture of all ) also contains 4-5% Zn as ZnO and/or ZnF2. For this separation also shall we follow the same above? how the
interferance of F- and Zn would be? and how to tackle this?
Which strong base can we use, KOH, NaOH?
What are molden base can we use?
For oxidising the Cr(III) to Cr(VI) which oxidising agent can we use? 20% H2O2 okay?
I think if H2O2 is in excess the Cr(VI) will again oxidise that to O2 and it will reduce to Cr(III). How to avoid this? Or can you suggest some other
Oxidising agent for this?
after oxidising the Cr(III) to Cr(VI) why should we add acid before adding Ammonia to precipitate Al as Al(OH)3?
Does the hexavalent chromium not react with ammonia?
[Edited on 28-7-2011 by vinothan23]
|
|
|
sternman318
Hazard to Others
Posts: 121
Registered: 21-4-2011
Member Is Offline
Mood: No Mood
|
|
Is it necessary to oxidize the chromium? Adding excess ammonia will produce the insoluble Al(OH3) as you said, and the soluble [Cr(NH3)6)3+ ( lookie .
Vinthan23, I belive acid is added to dissolve the Cr2O3 into Cr3+
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
With respect to oxidizing the chromium, per "The principles of chemistry", Volume 2 By Dmitry Ivanovich Mendeleyev, pages 138 and 139:
"This oxidising property of the dioxide (referring to PbO2) is particularly striking in the presence of alkalis. Thus under these conditions it
transforms chromium oxide into chromic acid, whilst lead chromate, PbCrO,, is formed, remaining, however, in solution, on account of its being soluble
in caustic alkalis."
Also, with respect to preparation of PbO2 (same source): "The best method for preparing pure lead dioxide consists in mixing a hot solution of lead
chloride with a solution of bleaching powder (Ferman)."
LINK:
http://books.google.com/books?id=5d0KAAAAIAAJ&pg=PA403&a...
There is also a discussion in Wikipedia (link: http://en.wikipedia.org/wiki/Lead_dioxide )
"Lead dioxide is well known for being a good oxidizing agent with example reaction listed below:[6]
2 MnSO4 + 5 PbO2 + 6 HNO3 → 2 HMnO4 + 2 PbSO4 + 3 Pb(NO3)2 + 2 H2O
2 Cr(OH)3 + 10 KOH + 3 PbO2 → 2 K2CrO4 + 3 K2PbO2 + 8 H2O"
There is more information and a link to a prior thread on PbO2 at my recent thread "Making NH4NO3 from Inexpensive Household Ingredients" at:
http://www.sciencemadness.org/talk/viewthread.php?tid=17058
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
If you go through molten base, then you have the option of oxidizing in the melt, e.g. with KNO3 or even with O2. You can also oxidize afterwards with
H2O2 or peroxodisulfate. In the latter case use some silver salt as catalyst and avoid presence of chloride.
Hexavalent chromium does not react with ammonia. The reason for using ammonia instead of a strong base is that it precipitates chromium in oxidation
state 3 while excess of this does not redissolve the resulting hydroxide. The same is true for aluminium. So, if you have a mix of hexavalent
chromium and aluminium in solution, then you can use ammonia to separate them. Al precipitates, hexavalent chromium does not.
Zinc complicates matters, because this forms a complex with ammonia. I'll have to further think about that.
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
With respect to the comment "or peroxodisulfate. In the latter case use some silver salt as catalyst and avoid presence of chloride", it may be
interesting (and important to some) to understand this catalytic process.
Per Gary Hodes in "Chemical solution deposition of semiconductor films", page 96 (link below) the author notes "Ag+ is a known catalyst for oxidations
using S2O8- (it is oxidized by persulfate to Ag(III), which is then the active oxidation agent)." Link:
http://books.google.com/books?id=PjmQnVX4OmUC&dq=NH4OH+%2B+PbO2&q=n...#v=onepage&q=Ag(III)&f=false
From this I surmise that Ag(III) oxides and is then reduced back to Ag(I), which is further oxidized by available persulfate, etc., per its alluded
to catalytic properties.
I may be correct in suggesting that increasing Ag+ concentration may marginally increase the reaction speed. Also, avoiding chlorides (as noted by
Woelen) that impede the formation of Ag(III) oxide, as well as pH considerations as overly acidic conditions are not favorable to the stability or
optimal formation of Ag(III) oxide (see, for example, "A New Economical Process for the Preparation of Silver(I,III) Oxide, AgO" by Dr. Sabine
Kielhorn1, Dr. Dieter H. Buß1, Prof. Dr. Oskar Glemser1,*, Dr. Roland Gerner2, Dr. Gerald Jeske2, where the authors in an alkaline environment
achieve 97% yield at pH 10.5. In addition, raising the temperature of the reaction to 90 C can significantly increase the speed of Ag(III) Oxide
creation (see patent 4,213,889).
[Edited on 31-7-2011 by AJKOER]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
