Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
Strange flash powder residue
Hello SM,
Yesterday I made my first FP (KNO3 + S + Al). When I ignited it, it burned slowly, because I used excess KNO3, I didn't measure anything. After
burning, there was strange green residue on one place. It was green like, idk, K<sub>2</sub>MnO<sub>4</sub>.
I have no idea what it was. Any ideas?
Thanks
Rest In Pieces!
|
|
|
Pulverulescent
National Hazard
Posts: 793
Registered: 31-1-2008
Member Is Offline
Mood: Torn between two monikers ─ "hissingnoise" and the present incarnation!
|
|
| Quote: | After burning, there was strange green residue on one place. It was green like, idk, K<sub>2</sub>MnO<sub>4</sub>.
I have no idea what it was. Any ideas?
Thanks |
Well it could hardly be potassium manganate unless Mn was present!
Al<sub>2</sub>(SO<sub>4</sub> <sub>3</sub> which
can be yellowish may have formed and just looked greenish!
Nitrates, BTW, make very poor flash powders with Al!
Chlorates are much preferred for Al-based FP - but sulphur (for obvious reasons) should not be a part of these compositions!
P
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
I know, that manganate was just an example! That idea with aluminium sulfate seems interesting. And I have no chlorates, nor perchlorates, because my
father always says how dangerous they are and shit... But it makes really nice light, though 
Rest In Pieces!
|
|
|
Pulverulescent
National Hazard
Posts: 793
Registered: 31-1-2008
Member Is Offline
Mood: Torn between two monikers ─ "hissingnoise" and the present incarnation!
|
|
Perchlorates are (quite a bit?) safer to handle than chlorates - just in case you ever find yourself in a position to make that choice!
P
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
Quote: Originally posted by Pulverulescent  | Perchlorates are (quite a bit?) safer to handle than chlorates - just in case you ever find yourself in a position to make that choice!
P |
Yeah, I know this fact very well, that's why I don't like chlorates. Once I made a perchlorate cell and let it run for like a month on 5A, but the
current wasn't fully used because of the graphite electrodes (I will not talk about details now). I filtered and dried it.
I was very stupid, but I put this stuff into mortar with sugar! And I started grinding hardly to see if it self-ignites. hopefully, no ignition
occured. It was probably impure (Na2CO3, NaOH, other stuff...).
EDIT: and when I ignited it mixed with sugar, the reaction was fast, but NO FLAME was present! really
[Edited on 8-1-2012 by Adas]
Rest In Pieces!
|
|
|
Pulverulescent
National Hazard
Posts: 793
Registered: 31-1-2008
Member Is Offline
Mood: Torn between two monikers ─ "hissingnoise" and the present incarnation!
|
|
Back in the day, I put a couple of ounces, mixed with dried graphite anode-sludge into a good-sized stone mortar and gave it a vigorous grinding, and
to test, put the lighted end of my cigarette to some powder which had collected on the flat rim of the vessel!
The sparks went into the mortar (naturally!) and just as the deflagration began, I swung myself around to try to avoid the worst of it!
I ended up losing half a beard and one eyelash and eyebrow and weathering a tongue-lashing from my then-wife, who'd seen the cloud of smoke billowing
from the shed . . .
It, the shed, still bears some of the scars inside its tin roof --- ~30 years later!
P
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Adas | Hello SM,
Yesterday I made my first FP (KNO3 + S + Al). When I ignited it, it burned slowly, because I used excess KNO3, I didn't measure anything. After
burning, there was strange green residue on one place. It was green like, idk, K<sub>2</sub>MnO<sub>4</sub>.
I have no idea what it was. Any ideas?
Thanks |
If it burns slowly it's not a flash powder, now is it??? That's a complete oxymoron. A real flash powder provides an almost instantaneous reaction,
usually with very fast development of gaseous reaction products so that no or little ash is left behind.
You need to respect stoichiometry to get that type of flash powder to... erm... flash! The reactions are:
KNO3 + 2 Al === > K + 1/2 N2 + Al2O3
and
2 Al + 3 S === > Al2S3
and with an excess of sulphur:
2 KNO3 + 3 S === > 2 K + N2 + 2 SO3
All are very highly exothermic.
No sulphates are formed, as far as I'm aware.
Al/KClO3/S is certainly reported to flash, but I'm not sure about Al/KNO3/S. If I recall well, in the Al/KClO3/S flash powder, sulphur is only a
minority constituent. The mixture has also been reported to be shock sensitive.
Carefully read up on these things before you experiment with them.
[Edited on 8-1-2012 by blogfast25]
|
|
|
Lambda-Eyde
National Hazard
Posts: 857
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
KNO<sub>3</sub>/Al/S is called "slow flash" and is used as a mild break charge in pyrotechnics. Chlorates and sulfur don't mix well, and
are notoriously sensitive. The number one rule of pyrotechnics is not to mix those two under any circumstances.
This just in: 95,5 % of the world population lives outside the USA
You should really listen to ABBAPlease drop by our IRC channel: #sciencemadness @ irc.efnet.org
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
I see no reason why potassium should be formed.
Rest In Pieces!
|
|
|
unionised
International Hazard
Posts: 5102
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Pulverulescent | | Quote: | After burning, there was strange green residue on one place. It was green like, idk, K<sub>2</sub>MnO<sub>4</sub>.
I have no idea what it was. Any ideas?
Thanks |
Well it could hardly be potassium manganate unless Mn was present!
Al<sub>2</sub>(SO<sub>4</sub><sub>3</sub> which
can be yellowish may have formed and just looked greenish!
Nitrates, BTW, make very poor flash powders with Al!
Chlorates are much preferred for Al-based FP - but sulphur (for obvious reasons) should not be a part of these compositions!
P |
Al sulphate is white. If it looks yellowish it's not pure. Once you allow for the possible presence of impurities then the green colour could be any
of a whole bunch of things.
Mn isn't a rare element
http://en.wikipedia.org/wiki/File:Elemental_abundances.svg
|
|
|
Pulverulescent
National Hazard
Posts: 793
Registered: 31-1-2008
Member Is Offline
Mood: Torn between two monikers ─ "hissingnoise" and the present incarnation!
|
|
Yes, the anhydrous and the hydrated salts are white!
The anhydrous salt, though, is occasionally found as yellowish crystals in the vicinity of volcanoes (or spent KNO<sub>3</sub>/S/Al FPs)
as a mineral called millosevichite so the yellow tinge would, indeed, appear to be from the sulphur-impurity . . .
P
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
| Quote: Originally posted by Pulverulescent | Back in the day, I put a couple of ounces, mixed with dried graphite anode-sludge into a good-sized stone mortar and gave it a vigorous grinding, and
to test, put the lighted end of my cigarette to some powder which had collected on the flat rim of the vessel!
The sparks went into the mortar (naturally!) and just as the deflagration began, I swung myself around to try to avoid the worst of it!
I ended up losing half a beard and one eyelash and eyebrow and weathering a tongue-lashing from my then-wife, who'd seen the cloud of smoke billowing
from the shed . . .
It, the shed, still bears some of the scars inside its tin roof --- ~30 years later!
P
|
That's a great story. I would love to see a film adaptation of it. Slow motion.
|
|
|
lavenatti
Harmless
Posts: 17
Registered: 19-12-2006
Member Is Offline
Mood: No Mood
|
|
What were you burning the flash powder on?
Could the green be external contamination?
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
Possibly yes, it was done on a piece of concrete.. but I doubt concrete reacted anyhow.
Rest In Pieces!
|
|
|
LanthanumK
Hazard to Others
Posts: 298
Registered: 20-5-2011
Location: New Jersey
Member Is Offline
Mood: No Mood
|
|
Was the aluminium contaminated with iron and somehow iron(II) sulfate formed?
hibernating...
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
Fe <0.2%
And it was more like K2MnO4, the green colour was very nice.
Rest In Pieces!
|
|
|
Lion850
National Hazard
Posts: 514
Registered: 7-10-2019
Location: Australia
Member Is Offline
Mood: Great
|
|
As I found out by chance, equal volumes of Aluminum powder and potassium permaganate makes a nice flash powder. And yes, there was green specs in the
residue, which made beautiful green water streams when I hosed away the leftovers.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
