| Pages:
1
2 |
metalresearcher
National Hazard
Posts: 791
Registered: 7-9-2010
Member Is Offline
Mood: Reactive
|
|
KNO3 + candle wax => NO reaction ???
I was just curious. Mixing KNO3 with paraffin candle wax from crushed candles and lighting it.
NOTHING happened except the wax started to burn slowly just as if it were heated without KNO3.
Why ?
Paraffin is a mixture of alkanes ranging from C10 to C20 which is flammable. Why does KNO3 not help ? Other combustible organics (sugar) burn very
fast.
[Edited on 2012-1-21 by metalresearcher]
|
|
|
Neil
National Hazard
Posts: 556
Registered: 19-3-2008
Member Is Offline
Mood: No Mood
|
|
The candle wax melts and cools the KNO3. Sugar has a higher melting point point and chars rather then simply melting
Sugar mixed with wax is used as a smoke formula.
|
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
There would be a self-sustaining reaction if a large quantity of wax mixed with KNO3, in an adequate ratio, was placed inside an intense fire. But wax
has difficulty burning, because as it is heated, it melts into a liquid layer which has a relatively low surface area to combust with any oxygen gas.
This is why wax is very difficult to burn without a wick. Also, KNO3 is not really an excellent pyrotechnic oxidizer. In my experience, prills of KNO3
added to burning organic material first seem to take time to get hot and melt before they release oxygen. The prills should be crushed into a fine
powder for maximum surface area.
|
|
|
Mr. Wizard
International Hazard
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
I agree with Neil.
My best guess is the liquid wax even when melted, keeps the temperature of the KNO3 below the decomposition point, just as the cotton wick of a candle
is preserved in a candle flame. When the sugar chars after losing the water in it's make-up, it then allows the heat of the fire to raise it and the
nitrate to a point where the reaction proceeds.
|
|
|
Neil
National Hazard
Posts: 556
Registered: 19-3-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by AndersHoveland  | | There would be a self-sustaining reaction if a large quantity of wax mixed with KNO3, in an adequate ratio, was placed inside an intense fire. But wax
has difficulty burning, because as it is heated, it melts into a liquid layer which has a relatively low surface area to combust with any oxygen gas.
This is why wax is very difficult to burn without a wick. Also, KNO3 is not really an excellent pyrotechnic oxidizer. In my experience, prills of KNO3
added to burning organic material first seem to take time to get hot and melt before they release oxygen. The prills should be crushed into a fine
powder for maximum surface area. |
Surface area, for the wax, is not the issue, the low vapor pressure and high boiling point of wax are what limit ones ability to set it on fire.
*liquids don't burn* Boiling wax burns and behaves like boiling kerosene.
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
A bit off topic, but if your looking for a mold-able pyrogen try KNO<sub>3</sub> with peanut butter. I know from experience this works
really well with KClO<sub>3</sub> . Even used it in some small paper rockets. When you get the consistency right it is no longer sticky
and really easy to work with.
[Edited on 21-1-2012 by Bot0nist]
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Mmmm, sounds tasty...
http://2.bp.blogspot.com/-79uoAvAip7E/Tr74bwS05bI/AAAAAAAABl...
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
The wax also increases its volume when heated and boiling temp. of wax is not high enough to release O2 from KNO3 - try adding excess KNO3 (in powder
form of course).
As Anders stated before, KNO3 on burning organic material first melts and THEN starts releasing oxygen. And from what I have seen, after it starts
releasing the O2, the temperature rises very quickly and the flame on contact surfaces becomes light blue/white. After all O2 is released, the white
molten "drop" of KNO3, KNO2 and whatever turns into a black solid in fraction of a second and sticks on the organic material. It is probably K2O.
Sometimes you can even smell KCN! That's probably the reaction between NOx released, carbon and K2O.
Rest In Pieces!
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
I bet if there was a barrel of finely ground potassium nitrate impregnated with wax in the correct amount, it would start burning furiously after a
while, when the heat builds up in the layers beneath.
Scale of the reaction changes things a lot.
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
This is so true. It has been accidentally demonstrated many times, often to the demonstrators peril. I have heard many stories of someone trying to
make a very large smoke-bomb/volcano and greatly scaling up a sugar+oxidizer or even a zinc/iron+sulfur mix, and instead creating a cascading,
exothermic catastrophe.
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
AirCowPeaCock
Hazard to Others
Posts: 311
Registered: 9-1-2012
Location: In your nation!
Member Is Offline
Mood: Hazardous
|
|
The wax will definitely melt before the KNO3 breaks down. KNO3 breaks down at something like 700C, and have you ever touched melted wax? Its not even
100C.
BOLD
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
No, KNO<sub>3</sub> starts to boil and decompose at just over 380C - 400C, IIRC. I have often boiled it in test tubes and dropped bits of
smoldering carbon in it as a demo.
http://en.wikipedia.org/wiki/Kno3
Watch.
http://www.youtube.com/watch?v=Y3Jxhbg0k4c
Oh, and melted wax is one thing. Try boiling wax that's surface has exceeded its auto-ignition temperature and is aflame. This, intimately mixed with
decomposing KNO<sub>3</sub> in med to large scale. Could get scary? I would love to conduct some tests. Cheap materials.
[Edited on 22-1-2012 by Bot0nist]
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
AirCowPeaCock
Hazard to Others
Posts: 311
Registered: 9-1-2012
Location: In your nation!
Member Is Offline
Mood: Hazardous
|
|
That low 'ey. Well that would explain why I picked it over KClO4 for the same thing with the test tube. Last time I did a frosted mini-wheat. My
brother was perplexed at the ammount of energy the box said one had, I thought it was totally reasonable, and then showed him just how much there was
(;
BOLD
|
|
|
Pulverulescent
National Hazard
Posts: 793
Registered: 31-1-2008
Member Is Offline
Mood: Torn between two monikers ─ "hissingnoise" and the present incarnation!
|
|
| Quote: | I was just curious. Mixing KNO3 with paraffin candle wax from crushed candles and lighting it.
NOTHING happened except the wax started to burn slowly just as if it were heated without KNO3. |
Well try it again ─ this time with an intimate mixture of finely ground oxidiser and sulphur 85/15 and see how that goes!
P
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
| Quote: Originally posted by AirCowPeaCock | | That low 'ey. Well that would explain why I picked it over KClO4 for the same thing with the test tube. Last time I did a frosted mini-wheat. My
brother was perplexed at the ammount of energy the box said one had, I thought it was totally reasonable, and then showed him just how much there was
(; |
If you have previously boiled potassium nitrate in a test tube then I would have assumed you knew its decomposition point lay well below 700C, as even
good boro tubes start to fail at over 500C.
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
Mr. Wizard
International Hazard
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Pulverulescent | | Quote: | I was just curious. Mixing KNO3 with paraffin candle wax from crushed candles and lighting it.
NOTHING happened except the wax started to burn slowly just as if it were heated without KNO3. |
Well try it again ─ this time with an intimate mixture of finely ground oxidiser and sulphur 85/15 and see how that goes!
P |
Many people don't realize the calorie unit used in food is actually a kilogram calorie or 1000 of the gram calories we speak of. It leads to confused
thinking and false ideas such as eating frozen food will significantly lower it's caloric intake. 
|
|
|
Neil
National Hazard
Posts: 556
Registered: 19-3-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Pulverulescent | | Quote: | I was just curious. Mixing KNO3 with paraffin candle wax from crushed candles and lighting it.
NOTHING happened except the wax started to burn slowly just as if it were heated without KNO3. |
Well try it again ─ this time with an intimate mixture of finely ground oxidiser and sulphur 85/15 and see how that goes!
P |
Better hope it has a pretty good flame to flare off the hydrogen sulfide you'd get by boiling wax and sulphur.
|
|
|
Fusionfire
Hazard to Others
Posts: 219
Registered: 8-7-2011
Member Is Offline
Mood: No Mood
|
|
Hmm, this got me thinking...what about KNO3 with coal dust?
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
| Quote: Originally posted by Neil | | Better hope it has a pretty good flame to flare off the hydrogen sulfide you'd get by boiling wax and sulphur. |
How the hell....?
Would behave pretty much as BP
Rest In Pieces!
|
|
|
Neil
National Hazard
Posts: 556
Registered: 19-3-2008
Member Is Offline
Mood: No Mood
|
|
too hard to get really good mixin with coal dust. Charcoal on the other hand...
|
|
|
Adas
National Hazard
Posts: 711
Registered: 21-9-2011
Location: Slovakia
Member Is Offline
Mood: Sensitive to shock and friction
|
|
But, Neil, can you explain how paraffin can react with sulfur?? I thought hydrocarbons are pretty inert..
Rest In Pieces!
|
|
|
Neil
National Hazard
Posts: 556
Registered: 19-3-2008
Member Is Offline
Mood: No Mood
|
|
Adas, I started answering the above post before yours was posted and thus did not see yours.
Try;
http://www.sciencemadness.org/talk/viewthread.php?action=pri...
|
|
|
Poppy
Hazard to Others
Posts: 294
Registered: 3-11-2011
Member Is Offline
Mood: † chemical zombie
|
|
How did you mixed the wax with KNO3 ? Poor mixtures leads to little or simple no efficaccy of the oxydizer. Try melting wax with white gasoline, then
pouring this into very finely powdered KNO3. Take care then when igniting it cause it may explode in half ?
|
|
|
AirCowPeaCock
Hazard to Others
Posts: 311
Registered: 9-1-2012
Location: In your nation!
Member Is Offline
Mood: Hazardous
|
|
It's not going to explode. Maybe if one used potassium chlorate, but not with the nitrate.
BOLD
|
|
|
aaparatuss
Harmless
Posts: 41
Registered: 12-7-2011
Location: indepth
Member Is Offline
Mood: questing
|
|
now in google E book Chemical & metallurgical engineering, Volume 22 page 806
under wax bleaching they describe passing ozone threw molten wax
then of course at nasa
http://science.nasa.gov/science-news/science-at-nasa/2003/28...
they are trying to use wax mixed with the correct oxygen ratio as a nice rocket....
so ozone impregnated wax seems at first neat, but not stoichiometric
the chlorate idea is interesting i must admit
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
