vinothan23
Harmless
Posts: 13
Registered: 8-7-2011
Member Is Offline
Mood: No Mood
|
|
Particle size of chromium III hydroxide precitate
What is particle size of Cr(OH)3 precipitates, what size(in microns) filter cloth/paper we can use to filter the precipitates without loss?
[Edited on 16-2-2012 by ScienceSquirrel]
|
|
|
Arthur Dent
National Hazard
Posts: 553
Registered: 22-10-2010
Member Is Offline
Mood: entropic
|
|
Can the name of this thread be any more vague?
Robert
--- Art is making something out of nothing and selling it. - Frank Zappa ---
|
|
|
phlogiston
International Hazard
Posts: 1375
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
I recommend a 42000 micron sized piece of filter paper, which will fit nicely in a 56000 micron sized buchner funnel.
[Edited on 16-2-2012 by phlogiston]
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
vinothan23
Harmless
Posts: 13
Registered: 8-7-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by phlogiston  | I recommend a 42000 micron sized piece of filter paper, which will fit nicely in a 56000 micron sized buchner funnel.
[Edited on 16-2-2012 by phlogiston] |
42000 micron seems very big size holed filter paper, how are you justifying your recommendation?
|
|
|
phlogiston
International Hazard
Posts: 1375
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Ok, because this is in beginners I will give you a break.
You are not going to get any serious answers to your question because it is very vague. There are a lot of factors that affect particle size, and you
have not given any details regarding the precipitate and how you obtain it.
It would also be far easier to simply try a few different types of filter paper than to predict the size of your particles, even if you do give a few
more details.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
One way to increase particle size is boiling a precipitate for some time. This tends to make a precipitate more coarse, such that it settles quicker
and is easier to filter.
Chromium(III) hydroxide is a notorious one. It is fine and hard to filter. One way to filter it is using the same filter paper over and over again.
Filter with a nice fine paper and collect the liquid, which goes through the filter. If this is still very turbid, then again filter it through the
SAME piece of filter paper. You'll see that the second time already much better results are obtained. You could try even a third time. Keep in mind
though that filtering will become painfully slow when the filter paper is nearly clogged with the fine particles of the precipitate. Vacuum pumping
helps a lot, otherwise be patient!
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
How do you even get chromium hydroxide to precipitate?
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
Hexavalent
International Hazard
Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline
Mood: Pericyclic
|
|
IIRC, Cr(OH)3 will precipitate on its own from solution due to low solubility, like a lot of other transition metal hydroxides.
"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Chromium hydroxide can be precipitated from a chromium(III) salt by adding ammonia. Using NaOH is not really good, because even a small excess amount
of NaOH causes the chromium hydroxide to redissolve, giving chromite solutions. Chromium(III) is amphoteric. Ammonia, however, is a sure method. Its
pH is just good to precipitate the chromium(III) as hydroxide, while it does not redissolve in a strong excess amount of ammonia.
You must not allow a precipitate of chromium(III) hydroxide to stand for a long time in ammonia (hours or days). Slowly, over the course of hours, the
chromium(III) hydroxide dissolves, due to formation of an ammonium complex of chromium(III). This complex has a nice purple/red color.
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
Is filtration really necessary?
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by vinothan23 | What is particle size of Cr(OH)3 precipitates, what size(in microns) filter cloth/paper we can use to filter the precipitates without loss?
[Edited on 16-2-2012 by ScienceSquirrel] |
Just try it out on the small scale and run it through some different porosities.
Virtually no precipitate I've seen can get through 1-10 micron elements in any significant quantity, unless you're about to HPLC something or it's
extremely expensive / rare. Most of them are caught around 50 microns.
It's always going to be a case of loss versus material worth as you won't get perfectly uniform particle sizes from most precipitations.
People like Mettler actually make weigh adapters specifically for taking filter papers for this kind of thing if it's critical.
A coffee filter paper or two will probably get it well enough if it's just at home work - put one inside the other, as the seams tend to be a bit
leaky.
|
|
|
platedish29
Hazard to Self
Posts: 76
Registered: 2-9-2012
Member Is Offline
Mood: absorbing CO2
|
|
Oh noes! Get rid of it! Cr2O3.x H2O is one of the worst stuff to be filtered ever having one of the smallest diameter in powder form it is also the
hardest
Decant and evaporate
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
