Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
Seporatory funnel, please advise
hi,
i'm about to buy my first seporatory funnel, and i'm stuck between 500 ml and 1000ml, a 1000 ml one is 15 dollars more, but i suppose it can't be to
big but can be too small, right?
and another thing, they look pretty delicate, can i put them in the dishwasher?
thanks for the help,
pyro
all above information is intellectual property of Pyro.  |
|
|
bbartlog
International Hazard
Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline
Mood: No Mood
|
|
I don't see how a dishwasher would reliably get one clean. The opening is too small.
Unless you have a specific reason to think that you will be working with bigger volumes, I'd go with the smaller separatory funnel. Aside from the
cost, the larger one may be unwieldy.
The less you bet, the more you lose when you win.
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
true, but does it make a big difference if its a bit too big?
that's a good point, as it already has a bit of a hard time drying Erlenmeyers, but the actual process will not break it?
all above information is intellectual property of Pyro. |
|
|
Vargouille
Hazard to Others
Posts: 380
Registered: 16-4-2012
Member Is Offline
Mood: No Mood
|
|
It shouldn't break it, considering the thickness of the glass.
EDIT: Not that I would recommend putting them in the dishwasher, mind you.
EDIT 2: The water shouldn't affect the glass, but it might play havoc with the stopcock.
[Edited on 28-4-2012 by Vargouille]
[Edited on 28-4-2012 by Vargouille]
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
ok, thanks, ill see if its possible to remove it.
but what about the size?
all above information is intellectual property of Pyro. |
|
|
Geko127
Harmless
Posts: 18
Registered: 11-11-2006
Location: HA ha, yea right
Member Is Offline
Mood: Day dreaming---Zones Stress Head.
|
|
Hell... Why not buy both.
Ask No questions and ill tell no lie\'s.
|
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
Which size you want really depends on what you want to do. You can always use a larger funnel for smaller amounts but even with a smaller funnel you
can still do what needs to be done. My gut says go with the larger one if only to allow room to grow. as for dishwasher use I have to say one thing:
DO NOT USE A DISHWASHER THAT IS USED FOR LAB DUTY TO WASH EATING UTENSILS. that warning aside I hand wash my glass. it allows me to both wash and
inspect each piece before I put it back on the shelf.
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
ok, so the 1000 ml one it is.
as for the dishwasher, we obviously only have one dishwasher, and we do use it for both, but i never just put em in, i wash them out with soap and
water, and put them in to get them completely free of anything i could have possibly missed and to get the nice shiny clean look. this comes from my
days at school, when all the beakers and flasks had thick rings of calk on them. it gave me the tattars. 
all above information is intellectual property of Pyro. |
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
cos hey cost 60 and 75 dollars!
all above information is intellectual property of Pyro. |
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Pyro  | ok, so the 1000 ml one it is.
as for the dishwasher, we obviously only have one dishwasher, and we do use it for both, but i never just put em in, i wash them out with soap and
water, and put them in to get them completely free of anything i could have possibly missed and to get the nice shiny clean look. this comes from my
days at school, when all the beakers and flasks had thick rings of calk on them. it gave me the tattars. |
True true( my school was worse..a good number of start cracks where to be
had and they didn't think that was a problem) but it is an old habit I learned from my mentor. I keep as much of my lab equipment away from the main
house as possible and I'll admit I'm a miser on safety.
[Edited on 29-4-2012 by Funkerman23]
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
i work in the kitchen under the extractor fan with a big board of wood with a rim around it on the stove, and cover the rest with newspaper or
plastic, obviously for things that involve explosions (making sodium for example) and things that involve very poisonous things i go outside.
its a bit of a contradiction, there glassware is dirty, cracked,... and they don't worry about that, but a few yrs ago they made us give them a buck
to burrow a lab coat to light a Bunsen burner, OOOO dangerous! *sarcastic*
all above information is intellectual property of Pyro. |
|
|
Hexavalent
International Hazard
Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline
Mood: Pericyclic
|
|
Not necessarily, it depends on what material your street clothing was made of. If it were a synthetic fabric or fiber, it could potentially pose a
serious fire risk, as well as melting and sticking to your skin horribly.
"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
i suppose,
the flame was about like a candle flame :p i always wear 100% cotton shirts, so no problem for me, but i get your point.
but a buck! i just ordered a few new lab coats online with one of my glass orders :p never more do i pay a buck for an oversized dirty labcoat.
back on topic:can i use a universial clamp to hold it? or do i need a special holder?
all above information is intellectual property of Pyro. |
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Pyro | i suppose,
the flame was about like a candle flame :p i always wear 100% cotton shirts, so no problem for me, but i get your point.
but a buck! i just ordered a few new lab coats online with one of my glass orders :p never more do i pay a buck for an oversized dirty labcoat.
back on topic:can i use a universial clamp to hold it? or do i need a special holder? |
Noting special is
needed for a seperatory funnel if you don't have a ring support a simple 2 or 3 prong clamp suffices.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
A ring of the proper size with split rubber hose pieces so not to damage the glass is very nice.
I would buy the 500mL sep funnel myself. I've never needed one bigger than that. A bigger one would just take up more storage space and not give as
clean a separation for small amounts. Losses on the wall will be greater, and it costs more too. There's a reason they make them in the smaller
sizes.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
ok, i suppose if i have more than 500 ml to do i just do 2 batches
all above information is intellectual property of Pyro. |
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I recently bought a 10cm iron ring for my 500mL separatory funnel. Tonight I added 3 pieces of rubber hose secured in place with black electrician's
tape. As you can see this makes a nice support.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Geko127
Harmless
Posts: 18
Registered: 11-11-2006
Location: HA ha, yea right
Member Is Offline
Mood: Day dreaming---Zones Stress Head.
|
|
Yep. Thats good advice. Get a 500ml & a 1ltr. They both serve there purpose. The 1ltr would be better of the two. And why the hell would you put a
sep funnel in a dishwasher ?. Oxy wash nappy soak works well cleaning glassware
Ask No questions and ill tell no lie\'s.
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
ok,
first ill get the 1 litre one, and when i can afford it ill buy a 500ml one, but can someone say what a reasonable price is for a 1l and 500 ml sep
funnel?
and what is:''Oxy wash nappy soak works well cleaning glassware''?
thanks
all above information is intellectual property of Pyro. |
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Pyro | ok,
first ill get the 1 litre one, and when i can afford it ill buy a 500ml one, but can someone say what a reasonable price is for a 1l and 500 ml sep
funnel?
and what is:''Oxy wash nappy soak works well cleaning glassware''?
thanks |
You might have a good bit of luck with Laboy (http://www.laboyglass.com/index.asp) the glass is actually decent and they have plenty of options. You may have to deal with the broken English
descriptions but they are worth it. And they sell to individuals, unlike Chemglass , or Kontes.
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
looks good, and less expensive :p
how about the:'' Oxy wash nappy soak''? what on earth is that?
all above information is intellectual property of Pyro. |
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
I've faced most often the issue of too small separatory funnel. If the volume is 1L, the useable volume is starting from 500mL for effective shaking,
which means it can handle about 250mL of treated substance at a time. For mere layer separation this does not apply.
Btw, are there some designated uses for different shapes of separatory funnels:
- Cylindrical
- Pear shape
- Globe shape
|
|
|
draculic acid69
International Hazard
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Hell no with the dishwasher. And with SEP funnels bigger is better.
I have a 250ml one and one time I had a liter or two to seperate.
What would have taken one afternoon with a bigger funnel now
Took a few days of splitting this liquid into small enough batches
to seperate in the funnel.never get caught out with having a too small
SEP funnel if U can avoid it
|
|
|
Sulaiman
International Hazard
Posts: 3555
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I have not bought a sep. funnel yet
but if I do I would get one with ground joints top and bottom -
for a little more interoperability with my existing glassware.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
