DubaiAmateurRocketry
National Hazard
Posts: 841
Registered: 10-5-2013
Location: LA, CA, USA
Member Is Offline
Mood: In research
|
|
Making copper chloride
I recently saw some ways, but some say it dosnt work while other says it does so im kind of confused.
I want to make copper II Chloride salt.
I have some ingredients.
Cu(NO3)2 CuSO4 Cu(OAc)2 CuO Cu metal NaCl KCl
Any possible routes ? and also, I want to make Zinc II chloride, i wonder if i can make if by adding zinc to copper II chloride if i am able to make
copper II chloride.
|
|
|
DraconicAcid
International Hazard
Posts: 4278
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
You can make it by dissolving copper(II) oxide in concentrated hydrochloric acid, or by dissolving copper metal in concentrated hydrochloric acid
(with a bit of hydrogen peroxide to oxidize it, or, if you're not in a hurry, exposure to atmospheric oxygen). Once you've got it in solution, the
trick is to isolate it. It's pretty soluble, but you might get crystals just from evaporation of the solution.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Metacelsus
International Hazard
Posts: 2531
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
It's technically possible with the reagents you have, but would be much easier if you had HCl.
1) Make sulfuric acid from CuSO4 (decompose to liberate SO2 gas, oxidize SO2 to SO3 over catalyst, dissolve in water to make H2SO4)
2) Make HCl gas from H2SO4 + NaCl. Absorb in water.
3) React HCl with CuO.
Yes, you could make zinc chloride from copper chloride and zinc.
|
|
|
DubaiAmateurRocketry
National Hazard
Posts: 841
Registered: 10-5-2013
Location: LA, CA, USA
Member Is Offline
Mood: In research
|
|
Ok if its technically possible with those related stuff i have, how do i make it !!
|
|
|
Oopsy_daisy
Harmless
Posts: 15
Registered: 24-6-2013
Location: Sweden
Member Is Offline
Mood: No Mood
|
|
IMO the easiest way to make the copper(II)chloride is this:
Electrolyse the copper sulphate with a carbon anode and a copper carhode. The resulting dilute sulphuric acid is boiled to concentrate it.
Next step is as cheddite cheese explained to react the concentrated sulphuric acid with a chloride salt to generate hydrochloride gas . This is then
led into water and reacted with Copper oxide
|
|
|
Metacelsus
International Hazard
Posts: 2531
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
From my experience making H2SO4 that way, the carbon anode will degrade into a pile of mush before you get any decent amount of H2SO4. I got tens of
milliliters per anode at best. It is, however, much easier than roasting CuSO4 and converting the SO2 to SO3.
Another (possible, but inconvenient) way to make HCl would be to electrolyze a solution of NaCl, collect the hydrogen and chlorine gas formed, and
react them.
|
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
Quote: Originally posted by Cheddite Cheese  |
Another (possible, but inconvenient) way to make HCl would be to electrolyze a solution of NaCl, collect the hydrogen and chlorine gas formed, and
react them. |
Even impossible if you don't have a suitable membrane..
|
|
|
Fantasma4500
International Hazard
Posts: 1677
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
my favorite is by CuCO3*2Cu(OH)2 + HCl
goes really fast but CuO is pretty well fast also, also theres no CO2 bubbling around with CuO..
CuSO4 + NaHCO3 > CuCO3*2Cu(OH)2 + Na2SO4
the copper carbonate will ppt. out
you can just dump the slurry into HCl solution..
you coul also dump the copper carbonate slurry into a beaker or whatever and heat it up, the CO2 will go off and this is happening just above 100*C
IIRC
it turns pitch black.. and then you can dump THAT in HCl
anyways, whats your use for CuCl2? i suppose rockets but as in a catalyst or what?
CuCl2 is my favorite chemical i need to know 
|
|
|
ElectroWin
Hazard to Others
Posts: 224
Registered: 5-3-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Cheddite Cheese | It's technically possible with the reagents you have, but would be much easier if you had HCl.
1) Make sulfuric acid from CuSO4 (decompose to liberate SO2 gas, oxidize SO2 to SO3 over catalyst, dissolve in water to make H2SO4)
2) Make HCl gas from H2SO4 + NaCl. Absorb in water.
3) React HCl with CuO.
|
why not try to combine this into a single step? get yourself even some crude, concentrated H2SO4 (liquid drain release)
make a moist slurry of CuO and bubble your HCl (produced by heating the H2SO4 with NaCl) through that?
then let the product settle and decant / save the liquid, which will be CuCl2 solution; and crystallize if you like
[Edited on 2013-6-26 by ElectroWin]
|
|
|
Finnnicus
Hazard to Others
Posts: 342
Registered: 22-3-2013
Member Is Offline
|
|
What about CuSO4 + 2NaCl --> Na2SO4 + CuCl2 and then boiling OR evaporating the solution. Then dissolve in ethanol, or methylated spirits. CuCl2 is
soluble (60g/100ml IIRC) while Na2SO4 is insoluble. At this point react it with Zinc or evaporate the ethanol to form crystals.
You didn't say you had methylated spirits, but you can pick up 2L for about 8$, so its not really a problem?
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
