amazingchemistry
Hazard to Others
Posts: 104
Registered: 4-4-2013
Member Is Offline
Mood: Excited
|
|
Repairing Ebay Spectrometers?
Searching the web for spectrometers, I have found that the new ones are incredibly expensive, and the cheap ones are sold "as is" with god-knows how
many problems. Given that I have neither the expertise nor the time to attempt a repair myself, but still would love to have spectrometers at my
disposal, I wanted your opinion on whether it'd be cost-effective to buy a used spectrometer from sites like Ebay and then contact a repair company
(like this one or this one ) so they can get the instrument up and running and ready for fun 
Always remember to check your pride at the door and ask that "stupid" question. Learning comes from having your "stupid" questions answered.
|
|
|
Dr.Bob
International Hazard
Posts: 2658
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I think that you will find that to be a disaster. But it could be hit or miss, some of the items might be great, some might be useless hunks of
rust. But the repair cost on instruments is huge, so if you can't do some of the work yourself, you will likely spend a fortune. You would be
better to find a local place that does repairs and ask them if they can help you find a used system somewhere. If you do buy an old one, I would buy
two or three of them if they are cheap enough, then you have spare parts available. But fixing old instruments is not trivial and inadvisable unless
you know what you are doing. Just like buying an old car from the junk yard and asking the dealership to make it like new.
|
|
|
Lambda-Eyde
National Hazard
Posts: 857
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
It can be done, but comissioning a company to do the repairs for you will be incredibly expensive. If you can't do it yourself it will be costly.
Benzylchloride1 has repaired a PE 1310. He also tried to repair a PE 4XX (something something) but didn't suceed because certain parts weren't
available anymore (the detector IIRC).
This just in: 95,5 % of the world population lives outside the USA
You should really listen to ABBAPlease drop by our IRC channel: #sciencemadness @ irc.efnet.org
|
|
|
phlogiston
International Hazard
Posts: 1376
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
I am currently repairing a uvikon 941, at a -very- slow rate (for lack of time).
The time it takes depends very much on the defect. Some things can be solved just by uploading new software, whereas other machines need work on the
optical components, etc.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
neptunium
National Hazard
Posts: 985
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
uvikon? oh you are looking for a spectrophometer...because I have this 200 dollars USB spectrometer that works great form sciencesurplus.com...they do
have them on ebay from time to time
http://www.ebay.com/itm/Compact-Fiber-Coupled-CCD-Spectromet...
it says do it yourself but its not that big of a deal to align it and the math for the calibration is fairly simple.
|
|
|
amazingchemistry
Hazard to Others
Posts: 104
Registered: 4-4-2013
Member Is Offline
Mood: Excited
|
|
Last time I checked there were a couple of "working" (as in, powers on, dials function and such) spectronic 20 and 20d spectrophotometers on ebay for
about 250 bucks. That's a steal if you ask me. Not much can go wrong with those I think. As far as spectrometers go, they seem to be on the simple
side of things.
Always remember to check your pride at the door and ask that "stupid" question. Learning comes from having your "stupid" questions answered.
|
|
|
phlogiston
International Hazard
Posts: 1376
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Well, A deuterium lamp can be pretty costly to replace, last time I ordered one it was around $600.
But I guess that is not really 'repair', bur rather 'maintenance' costs.
It would be a cool project to convert one of those old instuments to a computer-controlled modernized instrument.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
I've got a deuterium lamp sitting in storage that I <em>might</em> be willing to part with. I picked it up at a local surplus shop a few
years ago, but it appears brand new. It's an <a
href="http://www.chem.agilent.com/en-US/products-services/Parts-Supplies/Chromatography-Spectrometry/LC-and-LC-MS/Detector-Lamps/Pages/default.aspx?ci
d=8652&gclid=CLTNvu2ezLgCFTRo7AodeywA4Q" target="_blank">Agilent Technologies Deuterium Lamp J3, part № 2140-0590</a> <img
src="../scipics/_ext.png" />. It's in the original package with the Test Certificate from 2003. Manufacturer listed retail is approx. 650 USD; my
price/trade is negotiable to ScienceMadness contributors only. Institutional and corporate labs need not apply.
<table><tr><td><img
src="http://www.chem.agilent.com/en-US/products-services/Parts-Supplies/Chromatography-Spectrometry/LC-and-LC-MS/Detector-Lamps/PublishingImages/Large
/2140-0590.jpg" width="300" /></td></tr><tr><td align="center">(stock
photo)</td></tr></table>
If nobody absolutely needs it, it will remain lovingly cared for and admired in my collection of shiny science stuff. 
[Edited on 7/26/13 by bfesser]
|
|
|
bfesser
|
Thread Bumped
25-7-2013 at 20:02 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
