Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Acidifying and Basifying Iodine
Hazard to Others

Posts: 116
Registered: 26-9-2013
Location: Minnesota
Member Is Offline

Mood: Deprotonated

sad.gif posted on 5-1-2014 at 16:57
Acidifying and Basifying Iodine

Today I needed to clean out a vile that contained a small amount of iodine. I added hot water knowing that I2 is slightly soluble in water and would give a nice orange/red color. I added some NaOH in the hopes of producing water soluble NaIO3 which it did, evidenced by the loss of color in the solution and the other I2 dissolving. I thought I might have added too much NaOH so I used a small amount of 6% AcOH to neutralize any remaining NaOH. A small amount of bubbling occurred and then the reddish orange color from before returned. I understand how the addition of the base affected the solution but I don't fully get the part with the AcOH because no I2 precipitated.

"You need a little bit of insanity to do great things."
-Henry Rollins
View user's profile View All Posts By User
Hazard to Self

Posts: 71
Registered: 2-1-2014
Location: Area 51
Member Is Offline

Mood: Hydric

[*] posted on 6-1-2014 at 04:43

Iodine reacts with water like this:
I2 + H2O <-> HI + HIO
By adding the alkali, you pushed the equilibrium all the way to the right. This removed any free iodine, an therefore the colour. By acidifying the solution again, you reestablished the equilibrium, causing the colour to come back.

View user's profile Visit user's homepage View All Posts By User

  Go To Top