Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Wood's glass
hyfalcon
International Hazard
*****




Posts: 1003
Registered: 29-3-2012
Member Is Offline

Mood: No Mood

sad.gif posted on 18-3-2014 at 19:29
Wood's glass


This is to be used to filter out the visible spectrum from a black light LED flashlight. There is still enough visible light coming off these LED's that it washes the mineral florescence right out of the mineral. Wood's glass is what is/was used in the mercury vapor black light mineral lights from yesteryear. Anyone have a lead on where I could obtain a 50mm/2in piece? I'm even capable of cutting and grinding a larger piece to fit IF I can find any.
View user's profile View All Posts By User
jwpa17
Harmless
*




Posts: 45
Registered: 28-5-2013
Member Is Offline

Mood: No Mood

[*] posted on 18-3-2014 at 19:54


The photo store B H Photo Video lists a Rosco filter providing this for $8.95. It is "temporary unavailable." The Rosco site doesn't seem to list this filter. However, I noticed that their polyester filters generally have a transmission of about 40% from 370-400 nm, so you could, in principle, use a red filter. The "UV" LEDs don't output much red as I recall, so you'll end up with about half-intensity UV. Rosco USED to make a sample pack available for about $10. Of course, that was eons ago - sorry.

Also, FWIW, Wikipedia mentions that "black light" tubes have a similar transmission to Wood's glass (although not made of Wood's glass), so you could (carefully) cut a black light tube. Rather dangerous, though.

[Edited on 19-3-2014 by jwpa17]
View user's profile View All Posts By User
thesmug
Hazard to Others
***




Posts: 370
Registered: 17-1-2014
Location: Chicago, Il (USA)
Member Is Offline

Mood: No Mood

[*] posted on 18-3-2014 at 20:15


http://www.bhphotovideo.com/bnh/controller/home?O=&sku=1...
Is that good?
View user's profile View All Posts By User
hyfalcon
International Hazard
*****




Posts: 1003
Registered: 29-3-2012
Member Is Offline

Mood: No Mood

[*] posted on 19-3-2014 at 03:45


Rosco filters won't do the job. They still allow some visible light through. All I'm wanting is the UV spectrum to come through.
View user's profile View All Posts By User
Praxichys
International Hazard
*****




Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline

Mood: Coprecipitated

[*] posted on 19-3-2014 at 04:30


Get a bandpass filter from Edmond Optics in the UV range:

http://www.edmundoptics.com/optics/optical-filters/




View user's profile Visit user's homepage View All Posts By User

  Go To Top