morsagh
Hazard to Others
Posts: 187
Registered: 20-2-2014
Member Is Offline
Mood: No Mood
|
|
mercury chloride
How can i make HgCl2 from mercury?
Can be Hg+HCl+H2O2?
|
|
|
numos
Hazard to Others
Posts: 269
Registered: 22-2-2014
Location: Pasadena
Member Is Offline
Mood: No Mood
|
|
"Mercuric chloride is obtained by the action of chlorine on mercury or mercury(I) chloride, by the addition of hydrochloric acid to a hot,
concentrated solution of mercury(I) compounds such as the nitrate:
HgNO3 + 2 HCl → HgCl2 + H2O + NO2"
-Wikipedia
|
|
|
forgottenpassword
Hazard to Others
Posts: 374
Registered: 12-12-2013
Member Is Offline
Mood: No Mood
|
|
From what I gather, the easiest route from elemental mercury would be to form the mercury (II) sulphate by adding it to sulfuric acid, then mixing the
sulphate intimately with sodium chloride and heating the mixture to cause sublimation of pure mercury (II) chloride.
[Edited on 3-4-2014 by forgottenpassword]
|
|
|
Steam
Hazard to Others
Posts: 238
Registered: 25-3-2014
Location: Minnesota
Member Is Offline
Mood: Triple Point
|
|
Quote: Originally posted by forgottenpassword  | From what I gather, the easiest route from elemental mercury would be to form the mercury (II) sulphate by adding it to sulfuric acid, then mixing the
sulphate intimately with sodium chloride and heating the mixture to cause sublimation of pure mercury (II) chloride.
[Edited on 3-4-2014 by forgottenpassword] |
Or try concentrated HCl rather than NaCl, purification will be slightly easier.
DISCLAIMER: The information in this post is provided for general informational purposes only and may not reflect the current law in your jurisdiction.
No information contained in this post should be construed as legal advice from the individual author, nor is it intended to be a substitute for legal
counsel on any subject matter. No reader of this post should act or refrain from acting on the basis of any information included in, or accessible
through, this post without seeking the appropriate legal or other professional advice on the particular facts and circumstances at issue from a lawyer
licensed in the recipient’s state, country or other appropriate licensing jurisdiction.
|
|
|
Zephyr
Hazard to Others
Posts: 341
Registered: 30-8-2013
Location: Seattle, WA
Member Is Offline
|
|
The reaction between mercury sulfate and sodium chloride is;
HgSO4+2NaCl ---> HgCl2 + Na2SO4
This reaction is simpler and safer that mercury sulfate and HCl, and also uses easier available chemicals. Purification by recrystalization would also
be simpler than seperating the sulfuric acid from the mercury chloride.
|
|
|
forgottenpassword
Hazard to Others
Posts: 374
Registered: 12-12-2013
Member Is Offline
Mood: No Mood
|
|
As I understand it, heating a mixture of the two powders (mercury sulphate and sodium chloride) in a DRY state will evolve mercury (II) chloride
vapour which can be collected directly. Heating the mixture in a glass petri dish should allow the sublimed pure compound to be collected in the usual
fashion. I do not speak from experience, only what I have read.
|
|
|
morsagh
Hazard to Others
Posts: 187
Registered: 20-2-2014
Member Is Offline
Mood: No Mood
|
|
HgSO4
I haven´t got concentrated sulfuric acid. And i don´t want to sublime anything with mercury or do anything with chlorine.
Can be used hydrogen peroxide and sulfuric acid?
|
|
|
Ephesian
Hazard to Self
Posts: 97
Registered: 14-8-2012
Member Is Offline
Mood: No Mood
|
|
There are many old threads for this preparation. The nitric acid method is a very facile approach to the production of water soluable mercury salts. I
have done both methods myself and using H2SO4 route is not a route I would advise anyone into doing
|
|
|
forgottenpassword
Hazard to Others
Posts: 374
Registered: 12-12-2013
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by morsagh | I haven´t got concentrated sulfuric acid. And i don´t want to sublime anything with mercury or do anything with chlorine.
Can be used hydrogen peroxide and sulfuric acid? |
It would be worthwhile to look through this thread: http://www.sciencemadness.org/talk/viewthread.php?tid=20959
Dilute sulphuric acid will work since it is itself concentrated as the mixture is heated. I understand your reluctance to generate any
mercury-containing vapour, but sublimation is by its nature done in a closed environment, and should pose little risk; especially if done outside
(besides, mercury (II) chloride has been used an an antiseptic): http://www.youtube.com/watch?v=dBNELFi5XiY
Here is a thread which details its preparation via the nitrate:
http://www.sciencemadness.org/talk/viewthread.php?tid=597
If you need a pure and anhydrous sample then I think that sublimation would be worth considering. Here: http://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s... is the reference given for its preparation from mercury sulfate and sodium
chloride by direct heating.
(Drying the product from an aqueous solution is also complicated by the fact that it sublimes, and you may unknowingly expose yourself to a lot of the
vapour as it dries, if left in the open or in a warm environment).
[Edited on 4-4-2014 by forgottenpassword]
|
|
|
Fantasma4500
International Hazard
Posts: 1677
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
electrolysis using mercury as anode perhaps?
i recall its used for molten NaCl however, where the mercury is distilled off then recollected to be used as constantly running anode.. so perhaps its
not that reactive towards chlorine afterall..
perhaps make mercury carbonate then react that with HCl
it should be easy to make from any given mercury salt thats soluble and baking soda solution
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
