| Pages:
1
..
11
12
13
14
15 |
monolithic
Hazard to Others
Posts: 435
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
Has anyone ever come across a 24/40 thermometer adapter with o-ring that can fit a 10 mm probe? It seems most 24/40 max out at around 5-7 mm. I found
this https://www.wilmad-labglass.com/Products/LG-1451-306/ but $50 is a bit steep.
[Edited on 10-13-2020 by monolithic]
|
|
|
itsallgoodjames
Hazard to Others
Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline
|
|
I have a distillation adaptor that has space for a 10mm thermometer. I bought it from deschem. One of those with a stopper where the condenser might
work, depending on what you're doing. I'll get the link to it if you want
Nuclear physics is neat. It's a shame it's so regulated...
Now that I think about it, that's probably a good thing. Still annoying though.
|
|
|
monolithic
Hazard to Others
Posts: 435
Registered: 5-3-2018
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by itsallgoodjames  |
I have a distillation adaptor that has space for a 10mm thermometer. I bought it from deschem. One of those with a stopper where the condenser might
work, depending on what you're doing. I'll get the link to it if you want |
If it's not too much trouble can you find the link? I have a deschem 24/40 thermometer adapter but it maxes out at around 7.40 mm.
|
|
|
Dr.Bob
International Hazard
Posts: 2656
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I have at least two types of 24/40 adapters which should work with 10 mm tubes or trherms. I would sell them for $15. One is an Ace brand therm
adapter but with a 10 mm #11 inlet adapter, the other is an all PTFE one with a red GL type 10 mm adapter on top. Let me know if you are
interested, postage would be about $3-4 in the US.
|
|
|
itsallgoodjames
Hazard to Others
Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline
|
|
| Quote: Originally posted by monolithic | | Quote: Originally posted by itsallgoodjames |
I have a distillation adaptor that has space for a 10mm thermometer. I bought it from deschem. One of those with a stopper where the condenser might
work, depending on what you're doing. I'll get the link to it if you want |
If it's not too much trouble can you find the link? I have a deschem 24/40 thermometer adapter but it maxes out at around 7.40 mm.
|
The listing I bought it from seems to now be down (not surprising given I bought it over a year ago), I'll see if its been listed again under a
different link
Nuclear physics is neat. It's a shame it's so regulated...
Now that I think about it, that's probably a good thing. Still annoying though.
|
|
|
itsallgoodjames
Hazard to Others
Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline
|
|
| Quote: Originally posted by itsallgoodjames | | Quote: Originally posted by monolithic | | Quote: Originally posted by itsallgoodjames |
I have a distillation adaptor that has space for a 10mm thermometer. I bought it from deschem. One of those with a stopper where the condenser might
work, depending on what you're doing. I'll get the link to it if you want |
If it's not too much trouble can you find the link? I have a deschem 24/40 thermometer adapter but it maxes out at around 7.40 mm.
|
The listing I bought it from seems to now be down (not surprising given I bought it over a year ago), I'll see if its been listed again under a
different link |
https://www.ebay.com/itm/231059351282
This looks like it *might* be it, it looks the same and is from the same seller, but it is a different listing, so it might not be. It does look
pretty much identical to the listing I bought it from though.
Nuclear physics is neat. It's a shame it's so regulated...
Now that I think about it, that's probably a good thing. Still annoying though.
|
|
|
Dr.Bob
International Hazard
Posts: 2656
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Most thermometer adapters are designed to handle 5-6 mm and that is about it, the hole might be 7mm, but that would be hard to seal well. Ace sells
many adapters for various diameters, including one for 10-11 mm, which is also the diam of most glass stir shafts (not counting the cheap ones from
China).
|
|
|
Clear_horizons_glass
Harmless
Posts: 42
Registered: 30-9-2019
Location: Pullman, WA
Member Is Offline
Mood: Glass
|
|
Hey, yall.
Is this a chromatography column with hooks on top for some reason, or is this some kind of vacuum adapter or filtration adapter?
[Edited on 26-11-2020 by Clear_horizons_glass]
[Edited on 26-11-2020 by Clear_horizons_glass]
Clear Horizons Laboratory Glassblowing Services
-------------------------------------------------------------
www.clearhorizonsglass.com
Phone and Fax:
(855) LAB-GLAS
(855) 522-4527
Have a glass project you want made? email me at
info@clearhorizonsglass.com
or message us here |
with a U2U |
message |
\/
|
|
|
Clear_horizons_glass
Harmless
Posts: 42
Registered: 30-9-2019
Location: Pullman, WA
Member Is Offline
Mood: Glass
|
|
Also, what would you call this?
Adapter?
[Edited on 26-11-2020 by Clear_horizons_glass]
Clear Horizons Laboratory Glassblowing Services
-------------------------------------------------------------
www.clearhorizonsglass.com
Phone and Fax:
(855) LAB-GLAS
(855) 522-4527
Have a glass project you want made? email me at
info@clearhorizonsglass.com
or message us here |
with a U2U |
message |
\/
|
|
|
ArbuzToWoda
Hazard to Self
Posts: 98
Registered: 15-7-2020
Member Is Offline
|
|
Some call it "koń" where I live, so a horse. But I doubt that applies to other countries!
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
Ground joint valve adapter? That's what chinese would write when listing it on ebay.
|
|
|
Dr.Bob
International Hazard
Posts: 2656
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I would guess that it is a way to hold down a gas inlet (often an inlet with a variable stopcock release to control the pressure on the flash column.)
so it does not blow off under pressure. But you rarely see them on a column with a vacuum adapter, as you normally use only pressure or vacuum.
Might be meant to allow some sort of liquid feed adapter to be held to the top while vacuum is applied. Not sure of any specific name.
|
|
|
yobbo II
National Hazard
Posts: 709
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by yobbo II | Hi,
What is this item. It simply looks like a stopper with a handle. There is no access to the inside of the stopper and 'handle'.
This was posted 6 - 11- 19 my myself btw
Yob |
I see a similar item on ebay.
Called 2 x QUICKFIT B24/29 "SHONIGEER" STOPPERS , HOLLOW BLOWN {CHEMISTRY} BRITAIN
2 x QUICKFIT B24/29 "SHONIGEER" STOPPERS, (ALSO USED IN IODINE FLASKS) HOLLOW BLOWN {CHEMISTRY} MADE IN BRITAIN
https://www.ebay.co.uk/itm/2-x-QUICKFIT-B24-29-SHONIGEER-STO...
YOB
[Edited on 4-12-2020 by yobbo II]
|
|
|
SuperOxide
Hazard to Others
Posts: 486
Registered: 24-7-2019
Location: Devils Anus
Member Is Offline
|
|
Anyone know what this thingy is?
It looks like it's maybe a bubbler (or scrubber) with a suck back trap all in one piece of glassware? Perhaps you just put the liquid in the right
part which can act as a bubbler or even scrubber, and if the reaction causes some negative pressure (suck back), the liquid would go into the part on
the left as opposed to into the reaction vessel, then when the reaction starts generating pressure again, the liquid in the left part will get pushed
back into the right part, maybe? What do you think?
P.S. I found that photo while scrolling through this amazing chemistry photo portfolio, which I found in someones signature here on SM. If any of you haven't seen that page (or the homepage of the same site), I definitely recommend spending some time scrolling through it. I had no idea chemistry could be so insanely gorgeous.
[Edited on 20-12-2020 by SuperOxide]
|
|
|
electrokinetic
Hazard to Self
Posts: 52
Registered: 6-6-2012
Location: Rhuidean
Member Is Offline
Mood: No Mood
|
|
These pieces and others like it were donated to my classroom. I've never seen glassware that connects together this way, and I'm hoping someone can
tell me what this connection style is called so I can research it.
  
[Edited on 5-1-2021 by electrokinetic]
|
|
|
pneumatician
Hazard to Others
Posts: 409
Registered: 27-5-2013
Location: Magonia
Member Is Offline
Mood: ■■■■■■■■■■ INRI ■■■■■■■■■■ ** Igne Natura Renovatur Integra **
|
|
WTF is this?
uses??
https://www.ebay.de/itm/Industrie-Hochleistungs-Kolonne-Full...
|
|
|
Chemetix
Hazard to Others
Posts: 375
Registered: 23-9-2016
Location: Oztrayleeyah
Member Is Offline
Mood: Wavering between lucidity and madness
|
|
Part of a short path distillation apparatus. A Kugelrohr.
https://www.jkem.com/product/kugelrohr-short-path-distillati...
|
|
|
unionised
International Hazard
Posts: 5102
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
I was surfing eBay and came across this. The description is "Distillation apparatus reflux Quickfit CB11ND4X"
https://www.ebay.co.uk/itm/Distillation-apparatus-reflux-Qui...
Any suggestions?
|
|
|
Sulaiman
International Hazard
Posts: 3554
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Online
|
|
I don't know what it is but I want one!
I think that it is a part of this apparatus https://youtu.be/fMwFxUQx1PI
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
unionised
International Hazard
Posts: 5102
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Well there are two on ebay...
The last time I saw anything like it the caption said "The glassblower had hiccups".
[Edited on 7-3-21 by unionised]
|
|
|
vano
National Hazard
Posts: 661
Registered: 22-3-2019
Location: Georgia
Member Is Offline
|
|
What is this?
|
|
|
SWIM
National Hazard
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
Well I'd buy one as long as it makes that sound.
Besides, it might come in handy for the co-polymerization of amino-acid residues and carbohydrate molecules, both containing ionic groups.
It should be perfectly simple if I can gt the heavy hydrogen, and maybe a bit of radioactive thorium.
[Edited on 4-7-2021 by SWIM]
[Edited on 4-7-2021 by SWIM]
|
|
|
Dr.Bob
International Hazard
Posts: 2656
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Electokinetic,
They appear to be reservoirs for chromatography columns to me. You can screw them to the top of a colum to hold solvent, then either use gravity or
air pressure to move the solvent through the column.
|
|
|
Konduktor
Harmless
Posts: 7
Registered: 9-4-2021
Member Is Offline
Mood: Stressed & Depressed ®
|
|
Hi there,
Came across this strange piece when looking for glassware on my local auction site. Could anyone identify this mysterious part?
Cheers!
|
|
|
barbs09
Hazard to Others
Posts: 113
Registered: 22-1-2009
Location: Australia
Member Is Offline
Mood: No Mood
|
|
Crucible with a perforated base
I have a small ceramic crucible with a perforated base. Maybe it is designed to heat/react something until a molten phase can exit the base? Ant
thoughts? Thanks AB
 
|
|
|
| Pages:
1
..
11
12
13
14
15 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
