azaleaemerson
Harmless
Posts: 27
Registered: 8-4-2005
Location: AR
Member Is Offline
Mood: No Mood
|
|
mixture that smokes in air
Does anyone know of a solid, liquid, or paste that smokes when exposed to air or humidity? It needs to be safe, so pyrophoric stuff does not count.
"Mystic Smoke" magic goo is supposed to just look like smoke as it spreads between your fingers. "Little Smoke" magic stuff
actually smokes, but you have to rub your fingers together. I need something that smokes when the lid is opened. Any ideas?
Azalea
azalea
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
SnCl4(l)
Anhydrous tin(IV) chloride reacts with any moisture producing a white fog of HCl and SnO2. This is not pyrophoric, but it likely counts as dangerous
to you. How will you use this? so we know what is safe for this application.
|
|
|
sparkgap
International Hazard
Posts: 1234
Registered: 16-1-2005
Location: not where you think
Member Is Offline
Mood: chaotropic
|
|
Fuming nitric acid, anhydrous aluminum chloride, most carboxylic and sulfonic acid chlorides, and bromine aren't pyrophoric, but they aren't
safe either. 
How about renting a smoke machine from a disco house or something?
sparky (~_~)
"What's UTFSE? I keep hearing about it, but I can't be arsed to search for the answer..."
|
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
Solid carbon dioxide, dry ice.
Safe and easy (provided u don't start breathing right into it).
Dump the nuggets into hot water, and you got your smoke that vanished into thin air 
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
|
cyclonite4
Hazard to Others
Posts: 480
Registered: 16-11-2004
Location: is unknown
Member Is Offline
Mood: Amphoteric
|
|
| Quote: | Originally posted by chemoleo
Solid carbon dioxide, dry ice.
Safe and easy (provided u don't start breathing right into it).
Dump the nuggets into hot water, and you got your smoke that vanished into thin air |
Safe idea, but I don't think it suits his application, because it involves smoking upon opening a lid, not when immersing in hot water.
I've heard titanium tetrachloride (IIRC) smokes in air, but I think it would be virtually the same as tin (IV) chloride.
Perhaps if you used an airtight lid, you could place particles of finely-divided lightweight poweder of some sort, so that the force of opening the
lid projects some of the contents out, although that probably wouldnt be any good.
\"It is dangerous to be right, when your government is wrong.\" - Voltaire
|
|
|
sparkgap
International Hazard
Posts: 1234
Registered: 16-1-2005
Location: not where you think
Member Is Offline
Mood: chaotropic
|
|
Hey, I forgot about that, silly me. 
That's what some smoke machines use.
| Quote: |
...safe and easy (provided you don't start breathing right into it).
|
...or handling it with bare hands for extended periods. 
edit: yes, TiCl<sub>4</sub> generates smoke, but it's gaseous HCl. Not safe either, methinks.
sparky (~_~)
[Edited on 8-6-2005 by sparkgap]
"What's UTFSE? I keep hearing about it, but I can't be arsed to search for the answer..."
|
|
|
Silentnite
Hazard to Self
Posts: 93
Registered: 20-2-2005
Location: Somewhere deep in the heart of.. Michigan
Member Is Offline
Mood: Dysfunctional
|
|
If he uses the dry ice, then the smoke is going straight to the floor.
A little more info would be helpful.
Hopefully its not another ninja smokebomb idea...
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Oleum smokes incredibly strong, but it instantly makes big black holes into every organic substance it touches.
The smoke, however, is only slightly irritating, contrary to what would be expected.
A bottle containing two small pieces of cotton, one soaked with conc. ammonia and the other soaked with conc. HCl would be the safest thing that
smokes really strong.
NH3 (g) and HCl (g), given off from the solutions, combine to form solid ammonium chloride particles in the air.
I used this combination for experiments with a smoke ring launcher and it worked perfectly.
|
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
What's a smoke ring launcher? what sort of application?
PS agreed, NH3/HCl is a great combination, except of course the stink from any escaping NH3/HCl.
Unfortunately though this sort of smoke doesnt disappear quickly, while CO2 certainly does. As to smoke appearing when the lid is opened - I am sure a
mechanism could be worked out that triggers the release of water onto CO2(s) as soon as the lid is removed.
[Edited on 8-6-2005 by chemoleo]
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Smoke ring launcher is a cardboard box with a hole on one side and a diaphragm (usually plain cardboard, being well, cardboard...) opposite. Give it
a tap, puff out goes a ring. Or there are similar but more complicated (IIRC) methods. None of which I've tried yet. For shame!
Tim
|
|
|
azaleaemerson
Harmless
Posts: 27
Registered: 8-4-2005
Location: AR
Member Is Offline
Mood: No Mood
|
|
The application is for a bud of mine. He wants to do some sort of magic trick that something appears to burn in a jar or box, but doesn't.
That's why the usual magic finger rub won't work. He came to me since he thinks I know chemistry, even though it's mostly self taught.
Thanks for the ideas, I'll keep thinking too. If anything works good enough for him I'll let you guys know.
azalea
|
|
|
trilobite
Hazard to Others
Posts: 152
Registered: 25-2-2004
Location: The Palaeozoic Ocean
Member Is Offline
Mood: lonely
|
|
TiCl4 + 2H2O ---> TiO2 + 4HCl
So it's titanium white that's produced too. HCl gas is colorless, but it has a tendency to form small drops with water which are indeed
visible.
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Smoke ring launcher:
http://amasci.com/amateur/vortgen.html
BTW, the rest of the page rocks, too.
I made a launcher from a large speaker, a PP sewer tube reduction piece and a peanut can with a hole in the bottom.
By discharging capacitors of varying sizes and voltages (0- 12V, 10- 1000 microfarad) through the speaker, different travelling speeds of the rings
could be achieved, though the slow travelling ones looked much nicer, you could see how fast they were spinning and that they consisted of several
layers which were spinning at different speeds.
By discharging a 10 microfarad cap charged to 350V through the speaker (larger caps worked not nearly as well), very powerful smoke rings were
produced which were able to knock over cardboard targets at over 5 metres distance.
You could fill the smoke ring chamber with acetylene/oxygen mix and then shoot the rings at a candle! 
Or at a smoking person?
Perhaps open another thread in "Miscellaneous" for this?
[Edited on 8-6-2005 by garage chemist]
|
|
|
trilobite
Hazard to Others
Posts: 152
Registered: 25-2-2004
Location: The Palaeozoic Ocean
Member Is Offline
Mood: lonely
|
|
| Quote: | You could fill the smoke ring chamber with acetylene/oxygen mix
|
Or maybe a few drops of ether?
[Edited on 8-6-2005 by trilobite]
|
|
|
Pyridinium
Hazard to Others
Posts: 258
Registered: 18-5-2005
Location: USA
Member Is Offline
Mood: cupric
|
|
| Quote: | Originally posted by garage chemist
You could fill the smoke ring chamber with acetylene/oxygen mix and then shoot the rings at a candle!
Or at a smoking person? |
Then the C2H2/O2 mixture flashes back into the box and turns you and everyone nearby into a fine red mist. Great fun!
Some posters mentioned TiCl4 for a smoke generator. A little dangerous, no?
Spill water on that stuff and you'll be hating life. Plus, what a waste of TiCl4.
Oh, while we're at it, why not generate phosphine to make smoke rings...
ah, I know this is madscience.
I'd stick with the HCl/NH3 mixture, even though the ammonium chloride 'smoke' will leave white residue on everything. It does look
pretty convincing as smoke.
Edit: sparkgap, I KNOW you guys are plenty aware of TiCl4 and its properties. I was more concerned that the casual reader, or the guy who asked the
question, might not know what they're getting into. I know, I know, TiCl4 isn't exactly easy to get... but there was that story some years
ago of a chemist who didn't need his TiCl4 anymore, so he donated it to a local school. They didn't know how to store it. It caused a
nasty fire and HCl release.
Yeah I figured garage chemist was joking when I saw the bit about blowing the rings at a smoking person...
Edit 2: "HCl/ammonia, azalea's pal better be good at handling those".
I second that. Maybe they should just forget the smoke generator idea...
[Edited on 9-6-2005 by Pyridinium]
[Edited on 9-6-2005 by Pyridinium]
|
|
|
sparkgap
International Hazard
Posts: 1234
Registered: 16-1-2005
Location: not where you think
Member Is Offline
Mood: chaotropic
|
|
"...some posters mentioned TiCl<sub>4</sub> for a smoke generator. A little dangerous, no?"
Yes, it is. If you read our posts carefully, you'll see, however, that we are quite aware of how TiCl<sub>4</sub> reacts with water,
thank you very much.
I believe garage chemist was just kidding about the acetylene.
Anyway, if simulating burning was what was intended, dry ice will definitely not cut it, because, as Silentnite mentions, the "smoke" says
down. Clear giveaway of the trick.
HCl/ammonia, azalea's pal better be good at handling those...
sparky (~_~)
"What's UTFSE? I keep hearing about it, but I can't be arsed to search for the answer..."
|
|
|
Scratch-
Hazard to Self
Posts: 60
Registered: 22-2-2005
Location: U.S.
Member Is Offline
Mood: No Mood
|
|
Something interesting might be shooting a puff of HCl at a puff of NH3.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Oh, that could be cooool. Now I'm going to HAVE to build one of these things...gee thanks
Tim
|
|
|
Twospoons
International Hazard
Posts: 1280
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline
Mood: A trace of hope...
|
|
I've used the HCl /NH3 trick at my daughter's birthday party. Using dilute solutions still works, without being obnoxious. And it
impresses the hell out of 7 yr olds when your hands start 'smoking'
|
|
|
Lambda
National Hazard
Posts: 566
Registered: 15-4-2005
Location: Netherlands
Member Is Offline
Mood: Euforic Online
|
|
Practical, easy, the wise mans path !
EXELLENT !!!, easy, very practical, impressive, and the path that a man of wisedome has taken.
| Quote: | After he had slighly oiled his hands in, he pored molten lead over his hands, the lead rolled of, leaving the man unharmd.
|
[Edited on 9-6-2005 by Lambda]
|
|
|
Twospoons
International Hazard
Posts: 1280
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline
Mood: A trace of hope...
|
|
I was wearing latex gloves at the time ...
|
|
|
Lambda
National Hazard
Posts: 566
Registered: 15-4-2005
Location: Netherlands
Member Is Offline
Mood: Euforic Online
|
|
My quote sugested using oil, oh well, then we were both protected !
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
