| Pages:
1
2 |
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
Manganese Acetate...
Ok I think I'm right on this, but I wanna make sure before I order my reagants.
Mn2+ (bare metal) will combine directly with glacial acetic acid to form MnAoc (II) correct?
What would the dioxide do?
|
|
|
Nerro
National Hazard
Posts: 596
Registered: 29-9-2004
Location: Netherlands
Member Is Offline
Mood: Whatever...
|
|
Do you have ANY idea what you're talking about?
#261501 +(11351)- [X]
the \"bishop\" came to our church today
he was a fucken impostor
never once moved diagonally
courtesy of bash
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
| Quote: | Originally posted by Nerro
Do you have ANY idea what you're talking about? |
I think I do, I'm not a chemistry expert and I have had no formal training, never even took high school chemistry.
Yes I know very stupid question.
I'm tihnking that the manganese would readily combine with the glacial acetic acid to form the desired product.
But from what I have read, some metals do not react very well with some acids, therefore the reason behind posting this question.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
I'd think 20% or so in water would be better, the salt is probably hydrated (tetrahydrate for diacetate), so you'd just get junk instead of
a nice solution, being that it wants to be hydrated. And/or it may not be too soluble in GAA (I have no idea how it fares as a solvent) anhydrous
like that. And metal will want to release hydrogen, which may or may not be very good with GAA, being a weaker acid than HCl or H2SO4. It should
dissolve pretty well though, being up there near zinc in reactivity. MnO2 will probably oxidize things before dissolving, at a glance I only saw
Mn(2) and (3) acetate listed on Google. Might work with a reducing agent to distract its fury though.
If you DO have Mn metal on hand, I'll take it! Could use it for manganese aluminum and copper alloys, as well as cast iron and steel when I get
to melting them. As I understand it, metal (or at least pure metal, not speigleisen) isn't common to come by.
Tim
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
I noticed that the pyro site skylighter does have the metal powder for use as a burn rate modifier. Plus, its only a lil over $10 a pound US.
Anyhoos after some research and thinking, your right, Mn2+ does decompose water slowly to the hydroxide which should react with the Acetic Acid
forming the Acetate salt, or so the theory goes. At least thats what Vinegar does to Sodium Hydroxide.
AFAIK, the salt is soluble in GAA.
|
|
|
bio2
Hazard to Others
Posts: 447
Registered: 15-1-2005
Member Is Offline
Mood: No Mood
|
|
Mn elemental must be pretty pricey compared to the salts. Also might take a year to dissolve the shit! Also water is not wanted with the acetate as
it's a real bitch to dry.
Best is to reflux GAA with the carbonate till saturated then crystallize and repeat until it's all dissolved.
MnO2 works also and the chloride can easily be converted if you have this readily available.
|
|
|
praseodym
Hazard to Others
Posts: 137
Registered: 25-7-2005
Location: Schwarzschild Radius
Member Is Offline
Mood: crazy
|
|
| Quote: | Originally posted by bio2
Also water is not wanted with the acetate as it's a real bitch to dry.
|
Cant the acetate be dried by CaO or K2CO3?
|
|
|
bio2
Hazard to Others
Posts: 447
Registered: 15-1-2005
Member Is Offline
Mood: No Mood
|
|
Sure; it can be dried over many things in a vacuum dessicator. Depends on how long you want to wait to remove the water.
|
|
|
chloric1
International Hazard
Posts: 1070
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
Manganese sulfate
I have seen Manganese sulfate sold as a gardening micronutrient for about $10 for 5 pounds. Would need purification though. This in combination with
ammonium sulfate you could isolate electrolytic manganese. If you use a cathode of aluminum alloy of the 5000 series the manganese should come off
easily.
Fellow molecular manipulator
|
|
|
Jome
Hazard to Others
Posts: 154
Registered: 10-6-2004
Location: Soutwest sweden
Member Is Offline
Mood: desiccated
|
|
Dissolve the Mn in hydrochloric acid, add Na2CO3, wash the manganese carbonate, add acetic acid to manganese carbonate!
|
|
|
praseodym
Hazard to Others
Posts: 137
Registered: 25-7-2005
Location: Schwarzschild Radius
Member Is Offline
Mood: crazy
|
|
Well, it works... But wouldnt this reaction be rather slow?
|
|
|
Tsjerk
International Hazard
Posts: 3022
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
The reaction between the manganese carbonate and glacial acid is pretty slow indeed. You'll have to dissolve it in GAA (or another solvent), use
the hydrated manganese carbonate, dehydrated doesn't dissolve (At least in GAA it doesn't, don't know about other solvents).
Then just reflux it at about 60 degrees.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Think double decomposition would be at all valuable, like the copper acetate method? CaAc2 + MnSO4 = CaSO4 + MnAc2.
Tim
(Humm, somehow I doubt the "actinide" anion exists. But you know what I mean  )
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
I might just take some KMnO4 and react it with hexamine and proceed from there.
Found a source for it, that being the industrial supply company Grainger.
They sell 5 pounds of pure KMnO4 for around $35.
|
|
|
chloric1
International Hazard
Posts: 1070
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
Shop around
My local hardware sells the same stuff for $17 for 5 pounds.
Fellow molecular manipulator
|
|
|
bio2
Hazard to Others
Posts: 447
Registered: 15-1-2005
Member Is Offline
Mood: No Mood
|
|
.......I might just take some KMnO4 and react it with hexamine and proceed from there. .......
This is a pain in the ass compared to picking up the carbonate at the pottery supply and a jug of GAA. is the only thing else you need.
The Mn2 can be oxidized to the Mn3 at a carbon anode in GAA at 50-70deg.
|
|
|
gsd
National Hazard
Posts: 847
Registered: 18-8-2005
Member Is Offline
Mood: No Mood
|
|
Manganese Acetate is actually Manganese (II) Acetate - Tetrahydrate.
M.W. = 245
It contains 22.4 % Mn.
1) If you have access to Manganese Metal then you can very easily prepare it in a pure solution form my reaction of Metal with dilute AA.
Take 150 gm of metal add about 500 gm water and then slowly add 360 gm GAA with constant stirring. External heating is not required, the reaction is
quite vigorous and exothermic.
In the end it is important to keep the Acid in slight excess.
Also the reaction MUST be conducted in open or under hood as large volume of Hydrogen gas is evolved.
After reaction is over just filter the solution to clear pink filtrate and evaporate the water to get nice pink crystals of Manganese Acetate.
2) AA will not react with MnO2 (In fact even H2SO4 also does not react with MnO2 directly) You will have to reduce the MnO2 first to MnO by igniting
it with a reducing agent such as heavy oil. This process requires bit of skill to carry out on a small scale and resultant solution obtained after
reaction of MnO with dilute AA also needs lot of work-up in order to get pure MA. (as Mn02 in ore form contains lot of impurities which must be
removed)
3) If either Manganese Carbonate or Manganese Hydroxide is available then MA can be easily prepared by reacting it with dilute AA ( you will need good
stirring and heating as well) and subsequent filtration - evaporation - crystallization of solution
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
The other day I found a pottery supplier where I can get 10 pounds of the carbonate for less than $20.
Anyone got a suggestion for the AA?
I'd like to keep my costs on that below $15 per liter.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Vinigar?
Some dyeing suppliers sell 56% AA
Photography suppliers sell anywhere from 80 to 100% acetic acid.
[Edited on 19-8-2005 by rogue chemist]
|
|
|
BenZeen
Harmless
Posts: 37
Registered: 15-1-2010
Member Is Offline
Mood: No Mood
|
|
Carbonate -> acetate replacement
Hi everyone
Ok, simple question, please dont flame me.
When converting manganese carbonate into manganese acetate is it essential to use glacial acetic acid, or will acetic acid perform the anion
replacement reaction equally well?
thanks for any help 
|
|
|
woelen
Super Administrator
Posts: 7977
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Aqueous acetic acid will do the job as well (probably even better), but you need to heat the liquid to get all of the MnCO3 dissolved in the aqueous
solution of acetic acid. You also probably need excess acetic acid if you really want to have all MnCO3 converted to Mn(CH3COO)2. If you use exactly
balanced amounts of MnCO3 and acetic acid, then you'll see that the last part of the reaction proceeds VERY VERY slowly, hence the need to use excess
acid. What remains is a solution of Mn(CH3COO)2 in dilute acetic acid.
|
|
|
BenZeen
Harmless
Posts: 37
Registered: 15-1-2010
Member Is Offline
Mood: No Mood
|
|
thanks Woelen
|
|
|
bbartlog
International Hazard
Posts: 1139
Registered: 27-8-2009
Location: Unmoored in time
Member Is Offline
Mood: No Mood
|
|
In fact, based on comments in the glacial acetic acid thread, it's entirely possible that GAA would *not* work well at all. One of the proposed tests
for dryness is a lack of reaction when calcium carbonate (or was it some other carbonate?) is put in the acid. The acid being a weak one doesn't
dissociate much, and even less when little water is present. I don't think you'd want to go higher than 70%.
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
Manganese (II) sulphate (probably the monohydrate), stir bar, beaker
<a href="http://img214.imageshack.us/i/img1522u.jpg/" target="_blank"><img src="http://img214.imageshack.us/img214/2515/img1522u.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
@Waaaater, water of life, jesus gives us the water of life!@
<a href="http://img526.imageshack.us/i/img1524p.jpg/" target="_blank"><img src="http://img526.imageshack.us/img526/9128/img1524p.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Sodium bicarbonate, use an excess
<a href="http://img706.imageshack.us/i/img1525xt.jpg/" target="_blank"><img src="http://img706.imageshack.us/img706/4446/img1525xt.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Sulphate has dissolved
<a href="http://img266.imageshack.us/i/img1526aq.jpg/" target="_blank"><img src="http://img266.imageshack.us/img266/2343/img1526aq.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Sulphate + bicarbonate --> foam
<a href="http://img28.imageshack.us/i/img1529y.jpg/" target="_blank"><img src="http://img28.imageshack.us/img28/6642/img1529y.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Wait for the effervescing / fizzing / foaming to stop and then allow it to stir a while longer. Leave it for an hour or two (or overnight) if you want
to be sure you've got all the sulphate converted, or give it a warm too. Manganese (II) carbonate is precipitated as an insoluble solid. Both sodium
carbonate, bicarbonate and the sulphate are water soluble, so the solid Manganese (II) carbonate can easily come off with a coffee paper. It is a very
faint pink. Your filtrate should be colourless. If you're worried about having not converted all of the sulphate, try adding some more bicarbonate to
the filtrate and see if you get anymore manganese carbonate out. This would be more of a concern if you'd had to put a lot of effort in getting the
manganese cleaned up from battery paste or pottery grade.
<a href="http://img703.imageshack.us/i/img1531i.jpg/" target="_blank"><img src="http://img703.imageshack.us/img703/4017/img1531i.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img851.imageshack.us/i/img1533y.jpg/" target="_blank"><img src="http://img851.imageshack.us/img851/2470/img1533y.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img195.imageshack.us/i/img1535y.jpg/" target="_blank"><img src="http://img195.imageshack.us/img195/352/img1535y.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img526.imageshack.us/i/img1536ks.jpg/" target="_blank"><img src="http://img526.imageshack.us/img526/9079/img1536ks.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img411.imageshack.us/i/img1538al.jpg/" target="_blank"><img src="http://img411.imageshack.us/img411/4548/img1538al.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Allow it to drain until it's no longer dripping, then dump it into a flask. If you have well precipitated the carbonate, you can calculate the rough
amount of carbonate you have here from the amount of sulphate that went in. You now cover it with a slight excess of acetic. I'm using 98%.
This conversion could also be done in a beaker. The reflux temperature is somewhere just over 100C. As soon as it starts getting close, it'll be
fizzing away. Leave it to sit for an hour near reflux and the opacity, caused by the carbonate floating around in there, will disappear; you'll end up
with a transparent (slightly slutty) pink solution. Again, leave it to go a while longer to ensure it's all converted. Stirring isn't necessary.
I started with about 30g of sulphate and that is a 100ml flask, and (near / at reflux) it was foaming it's way up the condenser. Use a 250ml or leave
it below the reflux for longer (less foam produced when it's not boiling).
<a href="http://img703.imageshack.us/i/img1542c.jpg/" target="_blank"><img src="http://img703.imageshack.us/img703/6482/img1542c.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img20.imageshack.us/i/img1551oz.jpg/" target="_blank"><img src="http://img20.imageshack.us/img20/2028/img1551oz.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img836.imageshack.us/i/img1552q.jpg/" target="_blank"><img src="http://img836.imageshack.us/img836/6476/img1552q.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img7.imageshack.us/i/img1553hf.jpg/" target="_blank"><img src="http://img7.imageshack.us/img7/2114/img1553hf.jpg" width="800"
alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img27.imageshack.us/i/img1554h.jpg/" target="_blank"><img src="http://img27.imageshack.us/img27/9377/img1554h.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Hot hot hot!!!
<a href="http://img846.imageshack.us/i/img1556m.jpg/" target="_blank"><img src="http://img846.imageshack.us/img846/5058/img1556m.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Put it under the cold tap for two minutes and the entire contents solidified. The tap is at about 10C, which is below the MP for the acetic.
<a href="http://img196.imageshack.us/i/img1561yk.jpg/" target="_blank"><img src="http://img196.imageshack.us/img196/3697/img1561yk.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
I gave it a warm under the hot tap until almost all of it had gone back to a liquid, then left it to cool to RT naturally.
<a href="http://img210.imageshack.us/i/img1564iv.jpg/" target="_blank"><img src="http://img210.imageshack.us/img210/3638/img1564iv.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Lots of solid back again.
<a href="http://img41.imageshack.us/i/img1570dh.jpg/" target="_blank"><img src="http://img41.imageshack.us/img41/4633/img1570dh.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Some of the remaining acetic / moisture.
<a href="http://img214.imageshack.us/i/img1574u.jpg/" target="_blank"><img src="http://img214.imageshack.us/img214/7676/img1574u.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
I decided to drain that off, to be more sure of the moisture content / mass etc. Bubble gum pink has been reobtained.
<a href="http://img716.imageshack.us/i/img1577r.jpg/" target="_blank"><img src="http://img716.imageshack.us/img716/3858/img1577r.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Leaving the stir bar in there proved useful upon removing the solid. Should have poured this out into a dish really.
<a href="http://img844.imageshack.us/i/img1578ge.jpg/" target="_blank"><img src="http://img844.imageshack.us/img844/8388/img1578ge.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Sucked dry, candy floss pink. A soft mush.
<a href="http://img840.imageshack.us/i/img1582m.jpg/" target="_blank"><img src="http://img840.imageshack.us/img840/8153/img1582m.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Back in the flask, add some more acetic.
<a href="http://img703.imageshack.us/i/img1587uf.jpg/" target="_blank"><img src="http://img703.imageshack.us/img703/1773/img1587uf.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Weighing out a corresponding amount of permanganate.
<a href="http://img822.imageshack.us/i/img1591ic.jpg/" target="_blank"><img src="http://img822.imageshack.us/img822/6329/img1591ic.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img521.imageshack.us/i/img1593u.jpg/" target="_blank"><img src="http://img521.imageshack.us/img521/1143/img1593u.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
The 2 acetate beginning to melt into the acetic, which is coming close to it's reflux temperature
<a href="http://img214.imageshack.us/i/img1594if.jpg/" target="_blank"><img src="http://img214.imageshack.us/img214/5312/img1594if.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Great purple! Adding the permanganate over 20 mins.
<a href="http://img27.imageshack.us/i/img1596zv.jpg/" target="_blank"><img src="http://img27.imageshack.us/img27/1505/img1596zv.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
The acetate immediately begins turning a dark brown.
<a href="http://img821.imageshack.us/i/img1597r.jpg/" target="_blank"><img src="http://img821.imageshack.us/img821/5835/img1597r.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Too late matey! Train's left the platform!
<a href="http://img525.imageshack.us/i/img1600c.jpg/" target="_blank"><img src="http://img525.imageshack.us/img525/6749/img1600c.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Ten minutes in....
<a href="http://img811.imageshack.us/i/img1602bm.jpg/" target="_blank"><img src="http://img811.imageshack.us/img811/866/img1602bm.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
The flask looks like this..., heating continues for another 20 minutes after the addition.
<a href="http://img818.imageshack.us/i/img1603g.jpg/" target="_blank"><img src="http://img818.imageshack.us/img818/3924/img1603g.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
@Waaaatar, water of@ RECRYSTALLIZATION! Poured into the flask, given a shake, then...
<a href="http://img94.imageshack.us/i/img1610z.jpg/" target="_blank"><img src="http://img94.imageshack.us/img94/9679/img1610z.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img820.imageshack.us/i/img1613wl.jpg/" target="_blank"><img src="http://img820.imageshack.us/img820/5286/img1613wl.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img444.imageshack.us/i/img1615a.jpg/" target="_blank"><img src="http://img444.imageshack.us/img444/3953/img1615a.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img412.imageshack.us/i/img1616w.jpg/" target="_blank"><img src="http://img412.imageshack.us/img412/999/img1616w.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Awwww cumon! This is the one that should have stayed in the flask. The 2 acetate was all lumpy solid stuck in there. This is more like dust. The 2
acetate should be a dish or beaker when it cools, this.... leave it in a beaker or flask so it can have a swirl on the way out.
<a href="http://img641.imageshack.us/i/img1619ao.jpg/" target="_blank"><img src="http://img641.imageshack.us/img641/2571/img1619ao.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
COMMENCE AGAIN WITH THE SUCKING!
<a href="http://img23.imageshack.us/i/img1620bn.jpg/" target="_blank"><img src="http://img23.imageshack.us/img23/7374/img1620bn.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Filtrate is colourless, which is nice.
<a href="http://img823.imageshack.us/i/img1621yq.jpg/" target="_blank"><img src="http://img823.imageshack.us/img823/7776/img1621yq.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
I just cleaned that funnel... coffee filter next time me thinks.
<a href="http://img856.imageshack.us/i/img1627p.jpg/" target="_blank"><img src="http://img856.imageshack.us/img856/2660/img1627p.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
Left to sit on top of the radiator (45C) for 24h. Very, very dark brown Manganese (III) acetate.
<a href="http://img577.imageshack.us/i/img1685zu.jpg/" target="_blank"><img src="http://img577.imageshack.us/img577/7285/img1685zu.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img403.imageshack.us/i/img1686d.jpg/" target="_blank"><img src="http://img403.imageshack.us/img403/5868/img1686d.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a><br>
<a href="http://img31.imageshack.us/i/img1687i.jpg/" target="_blank"><img src="http://img31.imageshack.us/img31/1383/img1687i.jpg"
width="800" alt="Free Image Hosting at www.ImageShack.us" border="0"/></a>
Formulae
MnSO4 + NaHCo3 = MnCo3 + NaHSo4
Mn3O4 + 2CH3COOH → Mn(CH3COO)2 + Mn2O3 + H2O
4 Mn(OAc)2 + 5 HOAc + KMnO4 → 4 Mn(OAc)3 + KOAc + MnO2
Other manganese sources
You can start from the chloride if you like, or the nitrate.
Something interesting about the nitrate is that it can also exist as the tetrahydrate, is well soluble in water, melts at 37C and boils at, guess
what! 100C
Can I steal your photos for my own forum / website / christmas cards?
Steal away!
Just don't go claiming copyright on them or using them in your science fair project as your own.
[Edited on 7-12-2011 by peach]
[Edited on 4-18-2015 by Polverone]
|
|
|
Polverone
Now celebrating 21 years of madness
|
Threads Merged
6-12-2011 at 19:17 |
ldanielrosa
Hazard to Others
Posts: 124
Registered: 25-4-2007
Member Is Offline
Mood: transparent
|
|
Those pictures are beautiful. You're my hero, Peach- when I grow up I wanna be just like you!
That bit about the BP of Mn(NO3)2 got by me the first two times I tried to synthesize the stuff (by metathesis), so I only got manganese oxide
precipitate forming in nitrate solution when I heated it to accelerate evaporation.
On the upside, you give my new hope that my attempt at Mn (II) acetate which I haven't yet dumped may be worth more effort.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
