LD5050
Hazard to Others
Posts: 182
Registered: 16-1-2017
Member Is Offline
Mood: No Mood
|
|
Going above temp on Haloform reaction Acetone and Bleach?
I was making chloroform by the haloform reaction with acetone and bleach and I accidentally went over the 30c temp like a dummy kinda way over....
When I performed this reaction before the temp didn't rise so quickly and I was just able to throw in the freezer after adding the acetone. This time
I did the same thing and came back a few min later and the bottles were super hot. My question is what happens when I go over that temp thresh hold?
Do I just get a lower yield or do I get side products?
|
|
|
j_sum1
Administrator
Posts: 6229
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
Both. Someone more knowledgable than me will be along to provide all the details. But in essence, chloroform reacts with NaOH; which is the
byproduct of your bleach acetone reaction. This reaction is a lot slower at low temperatures.
Proceed as normal. But if your bottles became "hot", as you say, then it is likely that your yield is way down. See what you get and chalk this one
up to experience.
|
|
|
PirateDocBrown
National Hazard
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
You will also evaporate off your product.
Start with your bleach ice cold, and you won't have this problem.
[Edited on 3/12/17 by PirateDocBrown]
|
|
|
LD5050
Hazard to Others
Posts: 182
Registered: 16-1-2017
Member Is Offline
Mood: No Mood
|
|
Ya that what i did i put the bleach and the acetone in the freezer like every time before except this time it got really hot.
|
|
|
PirateDocBrown
National Hazard
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
Add it in portions, and cool down between.
|
|
|
XeonTheMGPony
International Hazard
Posts: 1636
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
I'd do it with the calcium Hypochlorite method, IE Pool shock and aceton.
I found it to be a very easy to control reaction with very good yield.
|
|
|
Rhodanide
Hazard to Others
Posts: 348
Registered: 23-7-2015
Location: Ｔｈｅ ８０ｓ
Member Is Offline
Mood: That retro aesthetic
|
|
Quote: Originally posted by LD5050  | | I was making chloroform by the haloform reaction with acetone and bleach and I accidentally went over the 30c temp like a dummy kinda way over....
When I performed this reaction before the temp didn't rise so quickly and I was just able to throw in the freezer after adding the acetone. This time
I did the same thing and came back a few min later and the bottles were super hot. My question is what happens when I go over that temp thresh hold?
Do I just get a lower yield or do I get side products? |
Yes, it will boil the Chloroform off, quickly.
Actually, I have a video in which I do exactly that, here: https://www.youtube.com/watch?v=fFUzmINeZ0U
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
