Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: I discovered what might be a useful source for Aus members...
j_sum1
Administrator
********




Posts: 6222
Registered: 4-10-2014
Location: Unmoved
Member Is Offline

Mood: Organised

[*] posted on 27-3-2017 at 04:59
I discovered what might be a useful source for Aus members...


http://www.chemtools.com.au/
Seems to have an interesting array of potentially useful products.
I have not done a price check or looked at shipping yet. But I have browsed a few MSDS's and found the following useful products:

mixed hexanes http://www.chemtools.com.au/product/aerosols/electronics-ele...
heptane http://www.chemtools.com.au/product/adhesives-threadlockers/...
isopropyl alcohol http://www.chemtools.com.au/product/aerosols/electronics-ele...
1 bromopropanol http://www.chemtools.com.au/product/aerosols/electronics-ele...
Limonene http://www.chemtools.com.au/product/cleaning-chemicals-and-s...
Paraffin, MEK, xylene, toluene, acetone http://www.chemtools.com.au/product-category/cleaning-chemic...

And this little mixture containing up to 30% 3,5-Diethyl-1,2-dihydro-1-phenyl-2-propylpyridine http://www.chemtools.com.au/product/adhesives-threadlockers/...
(Not really sure that is useful, but it is nice to have an SDS that is reasonably specific.)

There are numerous cleaners in the welding chemicals section that contain ammonium bifluoride and phosphoric acid in various proportions but my random clicks did not turn up anything that I thought was pure enough to be worth it.


Hopefully someone finds this helpful.
View user's profile View All Posts By User
NedsHead
Hazard to Others
***




Posts: 409
Registered: 9-12-2014
Location: South Australia
Member Is Offline

Mood: No Mood

[*] posted on 27-3-2017 at 05:24


Thanks Jay

if you're looking for phosphoric acid head down to your local hydroponic shop and ask for a bottle of pH down, it's phosphoric acid at 85% concentration
View user's profile View All Posts By User
j_sum1
Administrator
********




Posts: 6222
Registered: 4-10-2014
Location: Unmoved
Member Is Offline

Mood: Organised

[*] posted on 27-3-2017 at 15:48


While H3PO4 and ammonium bifluoride might be useful, I couldn't find a product that I thought was worth the effort separating.
The attraction was more along the lines of IPA. This seems to be readily available in the US but hardware stores here charge megabucks for a small 125mL bottle.
I was intrigued to find bromopropanol and MEK and started searching to see what else was there. You could add to the list, dimethyl ether.

Anyway, it seems that shipping is not a standard option but they do supply a store in my area so I will check them out at some stage.
View user's profile View All Posts By User

  Go To Top