LD5050
Hazard to Others
Posts: 182
Registered: 16-1-2017
Member Is Offline
Mood: No Mood
|
|
Will HCL contaminate H2SO4?
I used H2SO4 to dry HCL gas by bubbling the HCL through the H2SO4 in a gassing setup. I was wondering if the H2SO4 is Still good to be used for other
things or is it not contaminated with HCL? If so how could I purify it again..distillation?
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
As long as the water concentration is low, sulfuric acid doesn't absorb HCl very easily, and any that does get absorbed will have trouble ionizing. If
you remove the water, I think the absorbed hydrogen chloride will evaporate.
|
|
|
Sulaiman
International Hazard
Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
The hotter the H2SO4 the more rapidly the HCl will evaporate,
if you boil the H2SO4 , HCl then H2O will boil off
purifying then concentrating the H2SO4.
CAUTION: Clouds of corrosive, choking acid vapours will be generated
and if you concentrate the H2SO4 to near azeotropic it is quite scary due to the >330 oC stress on the glassware
and the potenial reaction of boiling concentrated sulphuric acid with eyes/skin etc.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
ave369
Eastern European Lady of Mad Science
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
In one of my experiments I was distilling HCl off such a mixture (~90% H2SO4 + HCl gas). I've got an interesting result: not all of HCl exited as gas,
some exited as azeotropic hydrochloric acid that condensed in the condenser, and the sulfuric acid became more concentrated. I didn't measure the
temperature but I think it distilled off at a lower temp than water usually boils off ~90% H2SO4. Is such a thing possible?
Smells like ammonia....
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Azeotropic hydrochloric acid, if I remember correctly, has a boiling point of 109 degrees Celsius. So, it's definitely possible. I would imagine that
in your setup, both the water and HCl gas were boiled off and subsequently recombined once the local temperature was cooled to 109 degrees (e.g. in
the condenser, as opposed to the boiling flask), while some water was presumably lost as vapor.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
