Cheisenberg
Harmless
Posts: 8
Registered: 22-10-2015
Member Is Offline
Mood: No Mood
|
|
How to synthesize cetyl chloride
Hello everyone, I would like to make cetyl (hexadecane) chloride in lab, but I don't want to use thionyl chloride. Can I use hydrochloric acid? I know
that it's difficult to chlorinate long chain alcohols with HCI, maybe with some catalyst, I don't know. If anyone can help me, I'll be glad 
|
|
|
gdflp
|
Thread Moved
2-11-2017 at 04:28 |
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Hydrochloric acid reacts very slowly with primary alcohols. You could use phosphorus trichloride or perhaps phosphorus pentachloride, or you could
brominate it with hydrobromic acid or even just sulfuric acid and sodium bromide. Cetyl bromide is usually more useful than cetyl chloride, but if you
need cetyl chloride for some reason, there might be an easy way to swap out the bromine for chlorine... I'm not sure offhand.
|
|
|
Cheisenberg
Harmless
Posts: 8
Registered: 22-10-2015
Member Is Offline
Mood: No Mood
|
|
Thank you JJay for your reply.
I don't want to use derivatives of phosphorous to.
I have researched for this synthesis that is chlorinating with HCI in everywhere, maybe there is a way to synthesize like this, but I couldn't find.
There are generally things that about short chain ones.
I wonder that if I use sulfuric acid and sodium chloride together to chlorinate cetyl alcohol as what you said about Br, can I make it? Maybe I can
synthesized this with pure HCI, which will be obtained.
Thanks again.
|
|
|
SWIM
National Hazard
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
What about Lewis acids like Zinc or aluminum chloride?
With those you could use a solvent more able to keep the alcohol in solution.
|
|
|
LearnedAmateur
National Hazard
Posts: 513
Registered: 30-3-2017
Location: Somewhere in the UK
Member Is Offline
Mood: Free Radical
|
|
Lucas' reagent (equimolar conc. HCl + ZnCl2) can be used to chlorinate alcohols. As already mentioned, primary alcohols react slowly, but it can be
accomplished through reflux. I'm not sure on the exact conditions and times required, but the product should not be miscible with water so extraction
is easy, at worst you'll have a turbid solution which can be distilled.
In chemistry, sometimes the solution is the problem.
It’s been a while, but I’m not dead! Updated 7/1/2020. Shout out to Aga, we got along well.
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
It looks like Lucas cited this paper in his paper on the Lucas reagent (found on Google Scholar; which led me to the Vespiary, haha). It gives a
procedure for obtaining cetyl chloride in 65% yield.
Attachment: alcohols2halides.hcl-zncl2.pdf (344kB)
This file has been downloaded 445 times
[Edited on 3-11-2017 by JJay]
|
|
|
Cheisenberg
Harmless
Posts: 8
Registered: 22-10-2015
Member Is Offline
Mood: No Mood
|
|
Thank you everyone.
I didn't try lewis acid. You're right. It can work.
I have downloaded document, I will try.
65% yield is not bad.
Thanks guys, I'll be back with results
|
|
|
VSEPR_VOID
National Hazard
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
Still waiting for those results
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|
|
Chemi Pharma
Hazard to Others
Posts: 349
Registered: 5-5-2016
Location: Latin America
Member Is Offline
Mood: Quarantined
|
|
As already mentioned by me at another topic: http://www.sciencemadness.org/talk/viewthread.php?tid=80658&... , alkyl chlorides can be achieved from any kind of primary, secondary, terciary or
benzylic alcohols, with TCCA and Triphenylphosphine. Archive attached below.
Other way, without the use of nasty and hard to get thionyl chloride or PCl3, PCl5 or POCl3 either, you can get the chloride from alcohol reacting the
late with Cyanuric chloride and DMF in dichloromethane media, as attached below:
both methods will give you high yields, as you can read at the papers.
Attachment: Alcohols to Chlorides with cyanuric chloride and DMF.pdf (54kB)
This file has been downloaded 336 times
EDITED:
Attachment: Alcohols to Alkyl Chlorides with TCCA and Triphenylphosphine.pdf (26kB)
This file has been downloaded 372 times
[Edited on 15-7-2018 by Chemi Pharma]
|
|
|
MJ101
Hazard to Self
Posts: 82
Registered: 14-6-2018
Member Is Offline
Mood: Always Sunny
|
|
@Chemi Pharma: Thanks for the links.
I downloaded the first link and I couldn't see the gif image in the MS Word Viewer. I couldn't copy it from the document either.
Here it is, in case anybody else runs into that problem
https://chemistry.mdma.ch/hiveboard/picproxie_docs/000372508...
|
|
|
Chemi Pharma
Hazard to Others
Posts: 349
Registered: 5-5-2016
Location: Latin America
Member Is Offline
Mood: Quarantined
|
|
@MJ101, posting again printed in .pdf. No more pictures problems, I guess:
Attachment: Alcohols to Alkyl Chlorides with TCCA and Triphenylphosphine.pdf (26kB)
This file has been downloaded 289 times
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
I would examine proposed commercial methods for the chlorination of, for example, CH4 involving combustion or heating with chlorine (explosion hazard)
or the associated alcohol and hydrogen chloride. The idea would be to try to apply a methane chlorination process to the alkane hexadecane.
In general, these commercial paths have been put forward to reduce the demand for chlorine (a cost factor) and are scalable. See, for example,
discussion at https://patents.google.com/patent/US5099084 .
A cited catalyst, depending on the method, appears to be copper chloride perhaps mixed with the likes of potassium chloride, ferric chloride, and/or
lead chloride.
The outlined path is, however, not a standard lab procedure, but if larger quantities and cost are important considerations, my suggestion may prove
to be of value.
[Edited on 15-7-2018 by AJKOER]
|
|
|
VSEPR_VOID
National Hazard
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
Quote: Originally posted by Chemi Pharma  | As already mentioned by me at another topic: http://www.sciencemadness.org/talk/viewthread.php?tid=80658&... , alkyl chlorides can be achieved from any kind of primary, secondary, terciary or
benzylic alcohols, with TCCA and Triphenylphosphine. Archive attached below.
Other way, without the use of nasty and hard to get thionyl chloride or PCl3, PCl5 or POCl3 either, you can get the chloride from alcohol reacting the
late with Cyanuric chloride and DMF in dichloromethane media, as attached below:
both methods will give you high yields, as you can read at the papers.
EDITED:
[Edited on 15-7-2018 by Chemi Pharma] |
That seems out of reach for the amateur. So far I have been making isopropyl chloride by the continuous fractional distillation of zinc chloride, aqu.
HCl, and the alcohol. This has had a slightly poor yield and takes a long time. I wonder if I could try and attempt the same reaction using TCCA. This
might yield chloroform or proponic acid.
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
