sodium_stearate
Hazard to Others
Posts: 255
Registered: 22-4-2011
Location: guard duty at the checkpoint
Member Is Offline
Mood: No mask.
|
|
Gelatin based adhesive
This is about the topic of "reversible adhesives".
One such glue was an old brand from about 100 years
ago called "Stratena", which was a clear cement that takes
many hours to dry because of having water in it.
As a bit of background on all of this: The recording heads
used 100 years ago to record sound on Edison cylinders
made use of this glue to hold some of the critical parts
together. One reason this type of glue was chosen, is because
it is easily removed so that small mechanical changes and adjustments can be made to the unit.
Taking apart a glue joint cemented together with gelatin-based
Stratena glue just requires placing a wet Q-tip on the parts
to unglue. Leave it soak for about 15 minutes and it
completely releases.
A few years ago there was a guy making and selling new
little bottles of Stratena on Ebay. It was good stuff, it works
fine. But he stopped making it.
He did tell me on the phone one time a few details about
how he was making it:
He said he was using "Jello" brand gelatin from the grocery
store. To this he added distilled water, boric acid, and alcohol.
For the alcohol he used vodka, which he also liberally
imbibed in all the while he was cooking his Stratena glue batch
on the stove.
This is all I currently know. One more detail from the old
days is that they used pure gelatin from sturgeon bladders,
a substance sometimes referred to as "isinglas".
The fellow making the glue told me that since sturgeon bladders seem to be in rather short supply and hard to
come by, he settled for grocery store "jello" gelatin.
Seeing as how he no longer makes this unique glue, and seeing as how it is in demand for those who want to
rebuild and use the old Edison cylinder recorder units,
I am currently pondering making some test batches
of Stratena myself, based on the sketchy and incomplete
info I have.
Now for my thoughts to bounce off of you all:
1) What might the boric acid and the alcohol be doing?
2) I understand the basic idea of a gelatin/water solution
evaporating and leaving gelatin as the adhesive, but do not
understand what function the other ingredients may have.
3) Any ideas or comments?
4) I suppose that a few trial batches and lots of testing
might be the only way to figure it out.
"Opportunity is missed by most people
because it is dressed in overalls and it
looks like work" T.A. Edison
|
|
|
Sulaiman
International Hazard
Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
According to Wikipedia, Isinglass was used as a glue but is not gelatin https://en.wikipedia.org/wiki/Isinglass
In the '60's it was very common here amongst home brewers but I preffered patience.
I suspect that, unless you can find the recipe, a lot of experimenting will be required.
Once you have determined the optimum recipie for your glue,
consider more humid/drier/hotter/colder climates if you want to sell it.
As for the actual chemistry ... it is beyond my knowledge 
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Boric acid Is probably a preservative, microorganisms will otherwise be happy to eat wet jello. A lot of the old protein glues used an alkali to
modify the proteins and make it less reversible under damp conditions, the boric acid may also help keep the glue from going permanently hard under
mildly basic conditions?
The alcohol keeps the glue liquid after cooling, otherwise protein glues of this general type were applied hot from a glue pot. It is the primary
difference between similar protein based hot pot glues and cold applied bottled liquid glues if you look at the old formularies.
Protein glues characteristics have a good bit to do with the particular amino acids they contain, the fish based glue may have had different
characteristics than the (cow based, I believe) gelatin glue.
Look at traditional book binders/repairers and musical instrument restoration sites, they use some of the same technology.
My teacher used hide glue poured liberally on the paste wrap of cylinder shells around where the spolette (rammed hard black powder in a cardboard
tube, traditional fuse) entered the shell. He said it penetrated paper and cardboard better than more modern glues such as PVA white glues. Also, he
ran a printing company as a day job- and they had a good bit of it from the old days. Along with grinders for the solid glue, water jackets hot glue
pots & etc. I use the liquid hide glue sometimes, not having the old equipment or materials.
(Edit)
You can find pure powdered isinglass on eBay, made from fish swim bladders. The stuff used by brewers has Sodium metabisulfite as antioxidant (and
mallic acid for I don't know what purpose) added, but is also mainly collagen from swim bladders of fish.
https://m.ebay.com/itm/ISINGLASS-POWDER-2-OUNCES-56-GRMS/263...
[Edited on 9-12-2017 by Bert]
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
LearnedAmateur
National Hazard
Posts: 513
Registered: 30-3-2017
Location: Somewhere in the UK
Member Is Offline
Mood: Free Radical
|
|
Well boric acid is used to cross link polyvinyl alcohol/acetate chains (the PVA glue slime of many a scientific childhood) so from my understanding,
it would strengthen the gelatine and make it a better adhesive. As for the alcohol, I'm not sure, my guess would be so that it's easier to apply,
faster evaporation thus drying time, or a combination of both.
In chemistry, sometimes the solution is the problem.
It’s been a while, but I’m not dead! Updated 7/1/2020. Shout out to Aga, we got along well.
|
|
|
unionised
International Hazard
Posts: 5103
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
I'm guessing this is a similar sort of thing.
Does it help?
http://www.woodcentral.com/woodworking/forum/archives_handto...
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
