Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
 Pages:  1  2
Author: Subject: The simplest preparation of sulfuric acid?!
NEMO-Chemistry
International Hazard
*****




Posts: 1560
Registered: 29-5-2016
Location: UK
Member Is Offline

Mood: No Mood

[*] posted on 9-1-2018 at 17:44


Its mainly wiki that got me thinking, looking at the solubility and the fact the potassium salt acts like two separate substances in solution, also potassium bisulphate is often made as potassium sulphate with sulfuric acid added, the sodium salt is very different, no solubility data for alcohols etc.

But more than that, every paper where its mentioned has only mentioned the potassium salt, none mention the sodium. Then finally we get to potassium carbonate salts ethanol much much better than sodium carbonate. There should be as much difference as there is.....

I got a knock back from the chem company! no idea why but apparently they are not stocking it now??? Strange as they said it was dispatched.

So will get potassium nitrate and make some nitric acid :D
View user's profile View All Posts By User
clearly_not_atara
International Hazard
*****




Posts: 1914
Registered: 3-11-2013
Member Is Offline

Mood: Big

[*] posted on 11-1-2018 at 17:09


Potassium salts are generally less hygroscopic than sodium salts, which may be an advantage in this case. It's possible that sodium sulfate catalyses the formation of ethylsulfuric acid and its salts. Potassium bisulfate is also almost twice as soluble in water as the sodium salt, which probably increases the yield significantly -- both sodium and potassium sulfate are very insoluble in alcohol.

Nice work j_sum1. Methylated spirits usually contain a few percent butanone these days IIRC. I don't think that would interfere with the rxn too much but it's there to prevent distilling them to get ethanol.

EDIT: Ammonium bisulfate may work even better -- the aqueous solubility is very high, about 200g / 100 mL at 300 K, and in some cases the addition of excess ammonium bisulfate to water precipitates (NH4)3H(SO4)2 (Beyer&Bothe 2006, attached), before any alcohol is even added! Ammonium sulfate is famously insoluble in organic solvents, as well.

[Edited on 12-1-2018 by clearly_not_atara]

[Edited on 12-1-2018 by clearly_not_atara]

Attachment: beyer2006.pdf (227kB)
This file has been downloaded 198 times





[Edited on 04-20-1969 by clearly_not_atara]
View user's profile View All Posts By User
SWIM
International Hazard
*****




Posts: 708
Registered: 3-9-2017
Location: 26 Ancho street
Member Is Offline

Mood: fractious

[*] posted on 13-1-2018 at 13:19



The bisufate in methylated spirits has increased in density by 15% and become rather viscous.

A sample showed strong acidity and a considerable reserve of it.

This is consistent with the description of the bisufate as slightly soluble in alcohol, but decomposed by it, in the CRC manual. The total acidity of the solution exceeded anything that the slight solubility of the bisulfate could have contributed by many times.

The solution was returned to the bisulfate to see if any further reaction occurs, as monitored by testing the density.
I think the possibilities of bisulfate systems for obtaining sulfuric acid merit some thought and attention. At least a bit more than they've received so far.

@clearly_not_atara, Where did that reference for sodium bisulfate being 'very insoluble' come from?
Doesn't seem like there'd be any reaction in that situation to me, at least not on a reasonable time scale.
Just can't see how the reaction could proceed into the crystals much without some degree of solvation.
Is there some phenomena I may be unaware of here?




Ebay says they need to get their hands on my bank account if I want to keep selling there.
This sounds like the best idea since putting ortho tricresyl phosphate in Ginger Jake.
I'm walking while I can still walk straight.




View user's profile View All Posts By User
JJay
International Hazard
*****




Posts: 3412
Registered: 15-10-2015
Member Is Offline


[*] posted on 13-1-2018 at 20:06


If you reflux sodium bisulfate and ethanol, it forms some sodium sulfate and some ethyl sulfate. This was claimed to be an extremely high-yielding reaction in a U.S. patent but didn't seem to be when I tried it with pool-grade sodium bisulfate and anhydrous ethanol, and I'm not exactly sure why. It definitely does work to some extent, though.

I don't see why you couldn't distill off the ethanol and then heat the ethyl sulfate to 130 or so and distill off ether, leaving behind sulfuric acid. You probably won't get all of the ethanol out that way, and as the temperature increases you'll distill off ethene and then ethyl sulfate (probably some diethyl sulfate also). There may be some sulfuric acid left when you reach its boiling point, though.

[Edited on 15-1-2018 by JJay]




View user's profile View All Posts By User
NEMO-Chemistry
International Hazard
*****




Posts: 1560
Registered: 29-5-2016
Location: UK
Member Is Offline

Mood: No Mood

[*] posted on 14-1-2018 at 02:33


I cant get hold of potassium bisulphate at the moment, my normal sources dont have it or wont sell it!
I have sodium bisulphate, how can i convert it?

As a side note I have real trouble getting most potassium salts including carbonate!! I am slightly restricted in which companies i can use, but could do with confirmed sources in the UK for potassium Bisulphate. Ebay isnt an option for this one, i have to buy this through the company, on advice i shouldnt buy chemicals for the company via ebay.
View user's profile View All Posts By User
AJKOER
International Hazard
*****




Posts: 2912
Registered: 7-5-2011
Member Is Offline

Mood: No Mood

[*] posted on 22-2-2020 at 18:27


Two comments:

First, on the alcohol/bisulfate mix, H2SO4/KHSO4 may be a case of a so-called acid salt, reported with sodium acetate and acetic acid, see this reference at https://pubs.rsc.org/en/content/articlelanding/1919/ct/ct919... . For a more recent science perspective, see https://www.ncbi.nlm.nih.gov/pubmed/17619064 .

Note, mentioned above is a possible salt, NaH3(SO4)2 which I re-write as NaHSO4(H2SO4).
-----------------------------------------------------------------

Second, an interesting nonredox reaction equilibrium, per a source, 'Redox and nonredox reactions of magnetite and hematite in rocks' at https://www.researchgate.net/publication/283343347_Redox_and... Namely:

Fe(III)2O3 (hematite) + Fe(II) + H2O = Fe(II)Fe(III)2O4 (magnetite) + 2 H+

If the ferrous salt is FeSO4, then some presence of H2SO4 implied. Likely, not a practical path to sulfuric acid, but one may be able to use it to create associated sulfates of low solubility starting with a target metal or its oxide.



[Edited on 23-2-2020 by AJKOER]
View user's profile View All Posts By User
G-Coupled
National Hazard
****




Posts: 287
Registered: 9-3-2017
Member Is Offline

Mood: Slightly triturated

[*] posted on 23-2-2020 at 11:52


Quote: Originally posted by NEMO-Chemistry  
I cant get hold of potassium bisulphate at the moment, my normal sources dont have it or wont sell it!
I have sodium bisulphate, how can i convert it?

As a side note I have real trouble getting most potassium salts including carbonate!! I am slightly restricted in which companies i can use, but could do with confirmed sources in the UK for potassium Bisulphate. Ebay isnt an option for this one, i have to buy this through the company, on advice i shouldnt buy chemicals for the company via ebay.


Can't you make a private purchase from eBay?
View user's profile View All Posts By User
clearly_not_atara
International Hazard
*****




Posts: 1914
Registered: 3-11-2013
Member Is Offline

Mood: Big

[*] posted on 23-2-2020 at 12:18


I guess this prep would work okay with sodium bisulfate. As noted above, I think ammonium bisulfate has more potential.

But I'm just confused when people say they can't get potassium. It's one of the three essential elements in fertilizer! "NPK" is the name of the game. I can go to the gardening store five minutes away and buy a 10kg bag of K2SO4. Nobody would even raise an eyebrow if I walked out with ten of them.

What do you actually see in the fertilizer aisle? Do they even sell fertilizers? Why are UK gardeners recommending high-potash fertilizer if it supposedly doesn't exist there?

https://ferndalegardencentre.co.uk/what-is-high-potash-plant...

In a post-apocalyptic nightmare, you can still get potassium salts by simply burning a bunch of wood and leaching the ashes. Annoying, but effective.

[Edited on 23-2-2020 by clearly_not_atara]




[Edited on 04-20-1969 by clearly_not_atara]
View user's profile View All Posts By User
MadHatter
International Hazard
*****




Posts: 1153
Registered: 9-7-2004
Location: Maine
Member Is Offline

Mood: Enjoying retirement

[*] posted on 23-2-2020 at 14:03
Electroplating waste acid


Do you have access to CuSO4, carbon rods and a battery
charger ? This is how I produced dilute H2SO4 in the past
and concentrated it by boiling off the H2O. CuSO4 in the US is
available as a root killer. Last check, $29.99 + tax for 10 LBS
from Walmart. Carbon rods from dry cell batteries or my
favorites, arc welder gouging rods(lookup my (per)chlorates
methods), are used.

When my favorite nephew came to me and asked me to help
him with his senior year(high school) final project in science, I
was elated !:D His teacher's only requirement was that it had
to involve electricity. I suggested electroplating.

Fellow mad scientists feel free to jump in at any point with tips,
possible side reactions or if it's clear that I have my head up my
ass. I welcome any criticism negative or positive.

The balanced equation(I think), with electricity, is as follows:

2CuSO4 + 2H2O --> 2Cu + 2H2SO4 + O2

Anyway, dissolve CuSO4 in H2O and electrolyze with the carbon
rods of your choice. The solution, which starts as a deep blue,
will eventually turn clear with Cu being electroplated on the
cathode. This leaves the H2SO4 in the solution.

BTW, this is the process IIRC, for producing 92 - 93% H2SO4
drain cleaners such as Rooto.

I hope this helps somebody. HAVE FUN !:D




Power comes from the barrel of a gun !
View user's profile View All Posts By User
AJKOER
International Hazard
*****




Posts: 2912
Registered: 7-5-2011
Member Is Offline

Mood: No Mood

[*] posted on 2-3-2020 at 19:21


Quote: Originally posted by AJKOER  

....
Second, an interesting nonredox reaction equilibrium, per a source, 'Redox and nonredox reactions of magnetite and hematite in rocks' at https://www.researchgate.net/publication/283343347_Redox_and... Namely:

Fe(III)2O3 (hematite) + Fe(II) + H2O = Fe(II)Fe(III)2O4 (magnetite) + 2 H+

If the ferrous salt is FeSO4, then some presence of H2SO4 implied. Likely, not a practical path to sulfuric acid, but one may be able to use it to create associated sulfates of low solubility starting with a target metal or its oxide.

[Edited on 23-2-2020 by AJKOER]


Per this paper https://pubs.acs.org/doi/pdf/10.1021/acs.jpcc.5b10949 , a reaction of interest forming FeSO4 from the action of O2 on FeS2:

FeS2 + 7/2 O2 + H2O = Fe(2+) + 2 SO4(2-) + 2 H+

So, for a school project, use water and oxygen to turn FeS2 and added Fe2O3 into H2SO4 and magnetite.


View user's profile View All Posts By User
Tsjerk
International Hazard
*****




Posts: 2290
Registered: 20-4-2005
Location: Netherlands
Member Is Offline

Mood: Mood

[*] posted on 5-9-2020 at 06:31


This reaction works and is nearly quantitative. I added 100 ml methanol to 100 ml solution containing 49 gram KHSO4 (a little heating was used to get everything in solution). The precipitate was vacuum filtered and rinsed with a bit of methanol. The extra methanol didn't cause extra precipitation in the filtrate, so probably less methanol would suffice.

The total volume of the filtrate was 180 ml of which 50 ml was titrated with 0.096 mol of NaOH, corresponding with a sulfuric acid yield of 96%.

The K2SO4 was dried and weighed and found to be 32,3 gr. Exactly the weight of the K2SO4 plus the the 4% yield loss in KHSO4. The KHSO4 is probably the reason people find their precipitate to be acidic.

I didn't bother to concentrate the acid as I have plenty, but I guess one could recover the methanol by simple distillation. I don't think methyl hydrogen sulfate or dimethyl ether would form because of the large amount of water present.
View user's profile View All Posts By User
 Pages:  1  2

  Go To Top