Sulaiman
International Hazard
Posts: 3558
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
24/29 better than 24/40 for overhead stirring
This is the first time that I have found a practical difference between 24/29 and 24/40 ... 1.1 mm at the narrow end.
It does not sound much but for the eBay overhead stirrers like mine (I bought only one)
the difference means a lot of ptfe needs to be removed to reduce by 1.1mm.
As bought the blades would not fit through 24/anything so needed trimming anyway.
Just thought I'd mention it.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I have a few of those stir paddles and have had no difficulties using them with 24/29 or 24/40, even with fairly large paddles... you have to trim the
blades?
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
