Leafs
Harmless
Posts: 18
Registered: 30-7-2017
Member Is Offline
Mood: No Mood
|
|
amber discoloration after heating 75% phosphoric acid
Hi I'm trying to concentrate 75% H3PO4 to around 85%.
I heated the liquid in a beaker with stirring never allowing the temperature to exceed 90C. Left it overnight because it was taking a while. Anyway
came back in the morning and I lost give or take the amount of water I was looking to remove, but the liquid has turned a dark amber color. Is this
the result of impurities?
|
|
|
woelen
Super Administrator
Posts: 7976
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Yes, this is due to impurities, almost certainly of organic nature. The heating, combined with the more concentrated acid, cause charring of organic
matter.
Pure reagent grade phosphoric acid is colorless and it remains colorless on heating.
You could try adding some H2O2 to the phosphoric acid (e.g. 10 ml of appr. 10% H2O2 added to 100 ml of acid) and then heating again until the volume
is down to 100 ml again. The organic material may be destroyed oxidatively and the heating decomposes any excess H2O2.
[Edited on 12-3-18 by woelen]
|
|
|
LearnedAmateur
National Hazard
Posts: 513
Registered: 30-3-2017
Location: Somewhere in the UK
Member Is Offline
Mood: Free Radical
|
|
Also refluxing with activated carbon may work which can then be filtered off. Phosphoric acid shouldn’t react with it, AFAIK.
In chemistry, sometimes the solution is the problem.
It’s been a while, but I’m not dead! Updated 7/1/2020. Shout out to Aga, we got along well.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
